banner01

Products

  • Custom T-Section U-Slotted Copper Busbar Connector with Dual Lugs

    Custom T-Section U-Slotted Copper Busbar Connector with Dual Lugs

    Parameter Specification
    Product type Custom copper electrical connector / busbar terminal
    Working product name T-section U-slotted dual-lug connector
    Material Pure copper per supplied brief; confirm grade and standard
    Visible geometry T-shaped section with central U-slot and two lugs
    Mounting features Holes shown; size, position, countersink or counterbore details to drawing
    Overall dimensions Drawing-defined
    Critical tolerances Drawing-defined and subject to manufacturing review
    Contact surfaces To be identified on drawing
    Surface finish As specified by the customer
    Plating options To be reviewed against the electrical interface and order specification
    Manufacturing route Selected after drawing and quantity review
    Inspection documents Agreed according to order requirements
  • Custom Copper Flag-Shaped Stationary Contact Post

    Custom Copper Flag-Shaped Stationary Contact Post

    Parameter Specification
    Product type Custom copper electrical contact component
    Working product name Flag-shaped or offset-paddle stationary contact post
    Material Copper grade and material standard to be specified
    Potential grade options Customer-specified; C11000 or C10200 may be reviewed if suitable
    Visible geometry Offset flat end, cylindrical stem and flat mounting end
    Mounting feature Hole shown; diameter, position and any thread details to drawing
    Overall dimensions Drawing-defined
    Critical tolerances Drawing-defined and subject to manufacturing review
    Contact surface finish As specified for the mating interface
    Surface treatment Unplated copper or an agreed plating option, subject to feasibility
    Manufacturing route Selected after review of material, geometry, quantity and tolerance
    Inspection documents Agreed according to order requirements
  • Custom Copper Disconnector Moving Contact Blade with Split Contact End

    Custom Copper Disconnector Moving Contact Blade with Split Contact End

    Parameter Specification / Customization Basis
    Product Type Copper moving contact blade / switchgear contact arm
    Material Copper; exact grade and temper to be specified
    Main Profile Long flat blade or linkage arm
    Slotted End Split width, length, root geometry and end-hole dimensions per drawing
    Spring Seat Annular seat or groove if required by the design
    Contact Features Raised ribs or contact lands if specified on the drawing
    Midsection Holes Four-hole pattern shown; sizes, types and spacing per drawing
    Pivot End Recessed or countersunk seat and hole geometry per mating hardware
    Overall Dimensions Length, width and thickness per approved drawing
    Surface Finish Bare copper or specified finish
    Optional Coating Silver, tin or other specified plating subject to design review
    Critical Tolerances Hole positions, slot symmetry, contact-face geometry and flatness per drawing
    Electrical Requirements Material and conductivity requirements defined by the equipment specification
  • Custom Insulated Copper Tubular Busbar with Threaded Ends

    Custom Insulated Copper Tubular Busbar with Threaded Ends

    Parameter Specification / Customization Basis
    Product Type Insulated copper tubular busbar / conductor tube
    Conductor Material Copper; exact grade and temper to be specified
    Tube Construction Tube form; manufacturing condition to be confirmed by specification
    Insulation Red insulating layer shown; material, method, thickness and performance per specification
    Insulation Coverage Covered length, exposed end zones and cutback positions per drawing
    End Features Stepped bare-copper collar and threaded connection interfaces as specified
    Thread Details Standard, size, pitch, tolerance class and engagement depth per drawing
    Tube Dimensions Outside diameter, wall thickness and overall length per drawing
    Port Geometry Bore, counterbore, end face and lead-in details per drawing
    Surface Finish Bare copper contact zones or specified finish
    Optional Plating Selective silver or tin plating subject to design review
    Electrical Requirements Conductor and insulation requirements defined by the equipment specification
    Inspection Requirements Dimensions, threads and insulation checks agreed before production
  • Custom S-Offset Copper Tubular Busbar with Internal Threaded Ends

    Custom S-Offset Copper Tubular Busbar with Internal Threaded Ends

    Parameter Specification / Customization Basis
    Product Type Bent copper tubular busbar / conductor tube
    Material Copper; grade and temper to be specified
    Tube Construction Tube type and manufacturing condition to be confirmed by specification
    Overall Geometry S-offset, Z-offset or other specified compound bend
    Tube Dimensions Outside diameter, wall thickness and length per drawing
    Bend Details Bend radius, angle, plane and offset distance per drawing
    End Interfaces Stepped collars and internal threads as specified
    Thread Details Standard, size, pitch, tolerance class and engagement depth per drawing
    End Bore Features Counterbore, bore depth and seating geometry per drawing
    Port Alignment End-face position, orientation and spatial offset per drawing
    Surface Finish Bare copper or specified finish
    Optional Coating Silver, tin or nickel plating subject to design review
    Inspection Requirements Bend profile, port position, thread fit and any specified leak test
  • Custom Split-Bent Copper Clevis Contact Bracket with Multi-Plane Hole Pattern

    Custom Split-Bent Copper Clevis Contact Bracket with Multi-Plane Hole Pattern

    Parameter Specification / Customization Basis
    Product Type Copper clevis contact bracket / busbar terminal support
    Construction Split-bent, one-piece configuration as specified
    Material Pure copper; exact grade and temper to be stated
    Overall Geometry Multi-plane bracket with backplate and parallel clevis ears
    Backplate Hole count, sizes, spacing and edge distances per drawing
    Center Slot Position, length, width and root geometry per drawing
    Clevis Ears Inner opening, width, parallelism and formed profile per drawing
    Ear Holes Hole count, diameter, spacing and coaxiality per drawing
    Base and Mounting Faces Flatness, alignment and contact area requirements per drawing
    Plate Thickness Specified by drawing
    Surface Finish Bare copper or specified finish
    Optional Coating Silver, tin or nickel plating subject to design review
    Critical Tolerances Hole position, ear alignment, opening width and flatness per drawing
    Electrical Requirements Material and conductivity requirements defined for the assembly
  • Custom Right-Angle Copper Terminal Block with Domed Flange

    Custom Right-Angle Copper Terminal Block with Domed Flange

    Parameter Specification / Customization Basis
    Product Type Right-angle copper terminal block / busbar mounting bracket
    Configuration L-shaped body with upright flange and perpendicular base
    Material Pure copper; exact grade and temper to be specified
    Upright Flange Domed or rounded upper profile with center bore and surrounding hole pattern
    Base Rectangular mounting face with specified bore and hole pattern
    Side Features Gussets, cheeks or seating features as defined by drawing
    Center Bore Diameter, fit, depth and position according to mating interface
    Smaller Holes Tapped or clearance configuration, size, pitch and position per drawing
    Mounting Faces Perpendicularity, flatness and contact area requirements per drawing
    Overall Dimensions Length, width, height and section thickness to be specified
    Surface Finish Bare copper or specified finish
    Optional Coating Silver, tin or nickel plating subject to application and process review
    Electrical Requirements Material and conductivity requirements defined by the equipment specification
    Inspection Requirements Critical dimensions and acceptance criteria agreed before production
  • Custom Copper Conductor Rod with Dual Internal Threads

    Custom Copper Conductor Rod with Dual Internal Threads

    Parameter Specification / Customization Basis
    Product Type Copper conductor rod / contact stem
    Construction One-piece rod body as specified
    Material Pure copper; exact grade and temper to be confirmed
    Main Profile Slim cylindrical shank with enlarged ends
    End Interfaces Internal threads at both ends, as shown in the supplied product brief and photos
    Thread Details Standard, nominal size, pitch, tolerance class and engagement depth per drawing
    Threaded Bore Blind or through configuration, bore depth and bottom geometry per drawing
    End Geometry End diameter, shoulder, collar and face details according to mating components
    Transition Geometry Tapered or radiused transitions as specified
    Overall Dimensions Length, shank diameter and end diameters per approved drawing
    Alignment Requirements Straightness, concentricity and runout requirements defined by drawing
    Surface Finish Bare copper or specified finish
    Electrical Requirements Grade and conductivity requirements defined for the application
    Optional Coating Silver, tin or other specified finish subject to design and process review
  • Custom Multi-Grooved Copper Moving Contact Rod for Switchgear

    Custom Multi-Grooved Copper Moving Contact Rod for Switchgear

    Parameter Specification / Customization Basis
    Product Type Copper contact rod / bushing central conductor stem
    Configuration One-piece rod body as specified by the approved drawing
    Material Pure copper; exact grade and temper to be specified
    Main Geometry Long cylindrical shank with enlarged stepped ends
    End Features Multiple circumferential grooves and shoulders; dimensions and intended function per drawing
    End Interfaces End-face geometry, bores and mating features per assembly requirements
    Internal Threads Optional or as specified; standard, size, pitch, class and engagement depth required
    Arcing Tip Optional; material, geometry and joining method to be specified if required
    Protective Caps End protection can be specified for handling and shipment
    Surface Finish Bare copper or specified finish; plated areas and coating requirements by agreement
    Critical Dimensions Overall length, shank diameter, end diameters, groove dimensions and interface locations
    Alignment Requirements Straightness, concentricity and runout requirements defined by drawing
    Electrical Requirements Conductivity and current-carrying requirements specified for the selected grade and assembly
  • Custom Round-to-Flat Copper Busbar Connector with Internal Thread

    Custom Round-to-Flat Copper Busbar Connector with Internal Thread

    Parameter Specification / Customization Basis
    Product Type Round-to-flat copper busbar connector / conductive terminal rod
    Material Pure copper; exact grade and temper according to the approved specification
    Main Geometry Cylindrical shank with a stepped threaded end and flattened connection palm
    Threaded Interface Female thread; standard, size, pitch, tolerance class and engagement depth specified by drawing
    Socket Construction Bore diameter, bore depth and minimum wall thickness defined by design
    Palm Configuration Two through-holes with a rounded external outline
    Palm Dimensions Width, thickness, length and contact area according to the mating assembly
    Mounting Pattern Hole diameter, center distance and edge distance according to drawing
    Transition Geometry Round-to-flat transition with specified radii and section dimensions
    End Step / Relief Diameter, width and function defined by drawing; not automatically a sealing feature
    Electrical Contact Surfaces Identified separately for the threaded end and bolted palm
    Surface Finish Bare copper, specified machining finish or an approved optional plated finish
    Dimensional Tolerances Feature-specific requirements established during drawing review
    Electrical Rating Determined by the complete assembly, operating conditions and validation requirements
  • Custom Copper Stationary Blade Contact with L-Bent Terminal Wing

    Custom Copper Stationary Blade Contact with L-Bent Terminal Wing

    Parameter Specification / Customization Basis
    Product Type Stationary blade contact / fixed copper contact terminal
    Main Geometry Upright blade on a horizontal base with an L-bent terminal wing
    Base Hole Pattern Four countersunk holes arranged in two rows, as illustrated
    Terminal Wing Hole Single through-hole; diameter and edge treatment specified by drawing
    Blade Lead-In Beveled or tapered geometry matched to the mating contact
    Material Options C11000, C10200 or another approved copper grade, subject to confirmation
    Material Temper Selected for forming feasibility and final mechanical requirements
    Construction Requirement Integral blade-and-base construction can be specified; manufacturing route reviewed before production
    Overall Dimensions Base length, width, blade height and terminal-wing length according to drawing
    Blade Working Thickness Defined for the mating contact, including any plating allowance
    Bend Geometry Angle, internal radius and terminal offset specified by drawing
    Countersink Geometry Included angle, major diameter and depth matched to the specified fastener
    Dimensional Tolerances Reviewed individually against functional datums and acceptance criteria
    Contact Surface Roughness, flatness and edge requirements agreed for the working faces
    Finish Options Unplated copper or specified silver, tin or nickel plating, subject to application review
    Conductivity and Hardness Grade- and condition-dependent; acceptance values and test methods agreed when required
    Electrical Ratings Established through equipment design and applicable validation
  • Custom 3-Way Copper Busbar Bracket with Split-Bent Tab

    Custom 3-Way Copper Busbar Bracket with Split-Bent Tab

    Parameter Specification / Customization Basis
    Product Type Custom formed copper busbar bracket / conductive connection bracket
    Cross-Section and Layout Three-plane configuration with drilled flanges and a split-bent tab
    Material Specified copper grade, subject to application requirements and supply confirmation
    Material Temper Selected to suit forming requirements and final mechanical properties
    Manufacturing Route Blank preparation, relief cutting, forming and machining as required by the drawing
    Flange Geometry Width, length, end radius and orientation customized
    Tab Geometry Rounded, hole-free tab; dimensions and function defined by the assembly drawing
    Hole Configuration Through-holes, counterbores and other approved machined features
    Counterbore Design Diameter and depth specified for fastener seating, remaining section and tool access
    Thickness Drawing-based; reviewed against bend radius, hole geometry and connection requirements
    Bend Requirements Bend radius, angle, relief geometry and springback allowance reviewed before production
    Dimensional Tolerances Defined on the approved drawing; critical dimensions reviewed individually
    Electrical Conductivity Dependent on the selected grade and material condition; testing agreed when required
    Surface Finish Unplated or specified plating, subject to application and process confirmation
    Current / Voltage Rating Determined and validated at equipment level
    Supply Condition Formed components or finished machined parts according to the agreed scope