Custom 3-Way Copper Busbar Bracket with Split-Bent Tab
Video
Short Description
Custom copper busbar bracket featuring two drilled flanges and a rounded, hole-free tab arranged across three planes. The illustrated design combines plain through-holes, stepped counterbores and relief cutouts for a compact connection layout. Copper grade, temper, thickness, bend geometry, hole positions and surface finish are specified against the approved drawing and assembly requirements.
Product Overview
This copper busbar bracket is a formed conductive component for power assemblies requiring connections or functional surfaces in different directions. Its geometry includes two main flanges with paired holes and a rounded tab extending into a third plane.
The pictured configuration has plain through-holes on one flange and cylindrical counterbores on another. Narrow relief cutouts separate the tab from adjacent material, allowing the forming layout to be engineered around the required assembly geometry.
Material selection begins with the specified Pure Copper grade and temper. Bendability, final dimensions, remaining material around holes and electrical connection requirements are reviewed together before the manufacturing route is confirmed.
“3-way” describes the component’s geometry. It does not mean three electrically isolated phases. A continuous copper bracket is electrically connected throughout and must be installed with the required insulation and clearances.
Key Features
| Feature | Design Relevance |
|---|---|
| Three-Plane Geometry | Provides differently oriented connection or functional surfaces within a compact assembly. |
| Split-Bent Rounded Tab | Adds a third-plane feature whose role can be defined as locating, guiding or contacting by the equipment drawing. |
| Mixed Hole Features | Allows plain bolt clearance and recessed fastener seating within the same component. |
| Relief Cutouts | Provide forming separation around the tab; slot ends and remaining section require engineering review. |
| Rounded Ends and Edges | Support handling and assembly requirements without establishing any particular voltage rating. |
| Drawing-Based Configuration | Allows hole positions, flange offsets and bend geometry to match the mating assembly. |
Manufacturing Process
The following is a typical planning sequence. The final route and operation order depend on material condition, geometry and inspection requirements.
| Stage | Manufacturing Activity | Main Consideration |
|---|---|---|
| 1. Drawing Review | Review connection faces, datums, bends, holes and mating hardware. | Identify dimensions that must be controlled after forming. |
| 2. Material Selection | Confirm copper grade, temper, thickness and documentation requirements. | Balance forming suitability with final application requirements. |
| 3. Blank and Relief Preparation | Prepare the blank, outer contour and relief cutouts. | Maintain suitable material around bend roots, slots and holes. |
| 4. Controlled Forming | Form the main flanges and tab in a planned sequence. | Manage bend radius, tool access, springback and feature interference. |
| 5. Feature Finishing | Drill, ream, counterbore or finish-machine features where required. | Post-forming machining may be selected for critical spatial relationships. |
| 6. Surface Preparation and Inspection | Deburr, clean, apply the specified finish and inspect agreed characteristics. | Protect contact surfaces and verify final acceptance requirements. |
For critical holes and mating features, the Fine Machining scope can be reviewed alongside the forming plan. Where plating is specified, finish requirements can be discussed through the Busbar Plating Shop.
Manufacturing & Quality Control
| Control Area | Inspection / Review | Acceptance Basis |
|---|---|---|
| Drawing and Revision | Confirm part revision, datums and critical characteristics. | Approved drawing and purchase order |
| Material Identification | Review the ordered grade, temper and available material documentation. | Agreed material specification |
| Blank and Relief Geometry | Check contours, cutouts, slot ends and remaining material. | Drawing dimensions and edge requirements |
| Formed Geometry | Check bend angles, flange orientation, tab position and relevant offsets. | Specified geometric and dimensional tolerances |
| Bend-Root Condition | Examine accessible bend roots and relief areas for visible defects. | Agreed visual criteria; additional testing when specified |
| Hole and Counterbore Features | Check hole size, location, counterbore diameter and depth. | Approved hole and fastener requirements |
| Contact and Surface Condition | Check burrs, cleanliness and specified contact-face condition. | Agreed surface requirements |
| Plating, When Ordered | Verify the specified finish using the agreed inspection method. | Order-specific plating requirements |
| Final Release and Packing | Confirm completed checks and suitable surface protection for shipment. | Agreed inspection and packaging plan |
Inspection scope, sampling and documentation should be agreed before production. See Quality Assurance for Cymber Metal’s quality-related information.
Typical Applications
| Application | Potential Function | Required Design Review |
|---|---|---|
| Switchgear Assemblies | Conductive corner connection between differently oriented busbar or terminal faces | Clearances, joint arrangement, support and temperature rise |
| Ring Main Units | Compact formed connection within a drawing-defined conductor layout | Equipment geometry, insulation coordination and assembly access |
| Circuit-Breaker Assemblies | Terminal connection or conductive bracket within an approved design | Contact interfaces, bolt loading and operating clearances |
| Energy-Storage PCS and Renewable-Energy Converters | Custom connection between power modules, terminals and busbars | Continuous current, thermal conditions and fault loading |
| Rectifier Cabinets and Industrial Power Equipment | Formed current-carrying connection around equipment constraints | Joint resistance, vibration, cooling and maintenance access |
These are potential applications, not equipment approvals or electrical ratings.
Frequently Asked Questions
A copper busbar bracket provides a conductive connection or functional mounting interface in a power assembly. This design places two drilled flanges and a rounded tab in different planes to suit a custom equipment layout.
No. Here, “3-way” describes three-plane geometry. A continuous copper component is one electrically connected part and must not bridge separate phases unless the equipment design specifically requires that electrical connection.
A split-and-bend layout can produce this type of geometry from one blank. Feasibility depends on thickness, temper, bend radii, relief geometry and tooling access; the route must be confirmed during drawing review.
The grade should follow the application’s electrical, forming and joining requirements. C11000 or an oxygen-free grade such as C10200 may be considered where appropriate, but the exact grade, temper and supply specification must be confirmed before ordering.
Counterbores provide cylindrical recesses for specified bolt heads or other hardware. Their diameter and depth must account for fastener seating, tool access and the copper remaining beneath the recess.
Yes, a manufacturing plan can include post-forming hole finishing where required. Achievable tolerances depend on the part geometry, datums, tooling and inspection method and should be reviewed against the drawing.
Current capacity depends on the copper grade, minimum conductor section, joint resistance, cooling, enclosure conditions and allowable temperature rise. Holes, slots and bends must be included in the assessment; a photograph alone cannot establish a rating.
An unplated or specified plated finish can be evaluated for the application. The order should identify the plating material, thickness, coverage, masking requirements and inspection criteria, with critical dimensions considered in the finished condition.
RFQ Information
| Information Required | Details to Provide |
|---|---|
| Drawing and Revision | Dimensioned PDF and available STEP or other 3D model |
| Copper Specification | Required grade, temper and applicable material standard |
| Main Dimensions | Thickness, flange sizes, tab dimensions and offsets |
| Bend Requirements | Bend angles, internal radii and critical formed relationships |
| Hole Details | Diameters, positions, counterbore sizes and depths |
| Critical Tolerances | Datums, contact-face requirements and assembly-critical dimensions |
| Electrical Conditions | Operating current, temperature-rise limits and relevant fault-loading requirements |
| Mating Hardware | Bolt heads, washers, tightening requirements and access limitations |
| Surface Finish | Unplated or specified plating, including masking requirements |
| Order and Documentation | Quantity, delivery requirements, inspection records and material documents |
Send your drawing, material specification and required quantity through Contact Us for a manufacturing review and quotation.










