Products
-
CNC Machined U-Shaped Copper Hinge Contact Block
Parameter Specification / Customization Basis Product Type U-shaped copper hinge contact block / copper clevis contact block Material Options C11000, C10200 or another approved copper grade; C10100 subject to specification review Material Standard Selected according to the specified grade, starting stock form and purchase requirements Body Geometry Two opposing end walls connected by a base or web Overall Dimensions Custom length, width, height and wall thickness according to drawing U-Channel Slot width, depth, root radii and mating clearances defined by the assembly Central Base Bore Diameter, location, fit and edge treatment according to drawing Cylindrical Boss Diameter, projection and positional relationship specified where required Annular Recess Inner and outer diameters, depth and surrounding wall thickness defined by drawing Threaded Hub Internal thread, engagement length and surrounding section reviewed for the fastening arrangement Lateral Tapped Holes Quantity, spacing, thread size and depth according to drawing Thread System Metric or imperial threads with specified tolerance class and gauge requirements Geometric Tolerances Position, parallelism, perpendicularity and coaxiality where functionally required Surface Roughness Defined separately for contact faces, bores and noncritical surfaces Conductivity and Hardness Grade- and condition-dependent; acceptance values agreed before production Surface Finish Machined copper or application-specific silver, tin or nickel plating, subject to review Inspection Documents Material and dimensional documentation according to the agreed inspection plan Supply Format Drawing-based samples and production batches, subject to feasibility and order confirmation -
CNC Machined Pure Copper Cup Contact with Central Bore and Anti-Rotation Notch
Parameter Specification / Confirmation Basis Product type Custom CNC-machined copper cup contact or cup electrode Material Pure copper or other copper grade according to approved drawing and electrical requirements Common grade options C10100, C10200, C11000, or another specified copper grade; confirm before production Visible geometry Hollow cylindrical body with rounded or beveled upper rim Internal cavity Stepped internal cavity with a circular shoulder or ring feature Bottom section Thicker flat-bottom section visible in the supplied images Central bore Circular coaxial bore; diameter and depth require drawing confirmation Locating feature Bottom-edge rectangular or radial anti-rotation notch/keyway Outer diameter To be defined by drawing Inner diameter To be defined by drawing Total height To be defined by drawing Wall thickness To be defined by drawing; uniformity depends on the manufacturing route Surface finish Machined copper surface; polishing, cleaning, passivation, or plating available when specified Optional plating Silver, nickel, tin, or other compatible finish subject to application review Dimensional tolerance Drawing-controlled; feasibility confirmed after review of critical features Surface roughness Specified by drawing and functional contact requirements Applicable standards ASTM, EN, JIS, GB/T, or customer specification as required Inspection documents Dimensional report, material documentation, conductivity data, and third-party inspection options can be discussed -
CNC-Turned Deep-Bored Pure Copper Cup Contact
Parameter Reference Specification / Order Requirement Product Type Custom deep-bored copper cup contact or cup-shaped conductive housing Main Geometry Hollow cylindrical cup with open mouth and bottom plate Cup Outer Diameter Reference range: Ø25–Ø260 mm Deep-Bore Inner Diameter Reference range: Ø20–Ø240 mm Total Height Reference range: 25–350 mm Side-Wall Thickness Reference range: 1.5–15.0 mm Bottom-Plate Thickness Reference range: 3.0–30.0 mm Central Bore Through-hole, counterbore, or internal thread according to drawing Central Bore Diameter Reference range: Ø6–Ø100 mm Rim Geometry Straight, tapered, beveled, or drawing-specific chamfered rim Primary Material Options C10100, C10200, C11000 copper Alternative Material Options C10400, C10700, or C18150 subject to application review Material Standard Selected according to grade, starting form, and customer specification Inner and Outer Diameter Tolerance Reference target: ±0.015 to ±0.03 mm Central Bore Coaxiality Reference target: ≤0.015 mm to the specified outer datum Wall Concentricity Reference target: ≤0.02 mm End-Face Runout Reference target: ≤0.02 mm Bottom Flatness Reference target: ≤0.02 mm Surface Roughness Reference target: Ra 0.2–0.4 μm on designated surfaces Hardness Reference range: 80–125 HV, depending on grade and condition Surface Options Bare copper, agreed anti-tarnish treatment, silver plating, or nickel plating Silver Plating Reference option: 5–30 μm on specified contact surfaces Plating Allowance Must be included in the machining and inspection plan Documentation Material, dimensional, surface, and coating documents according to purchase order -
Custom Copper GIS Contact Housing with Internal Grooves and Side Branch
Parameter Reference Specification / Order Requirement Product Type Custom tubular copper contact housing with lateral branch boss Main Body Geometry Hollow cylindrical body with open axial ends Internal Features Circumferential grooves and stepped bore features according to drawing Branch Interface Side cylindrical boss with four-hole end-face pattern Opposite-Wall Opening Circular access opening; diameter and location to drawing Additional Holes Radial tapped holes; thread size, depth, and position to drawing Primary Material Options C10200 oxygen-free copper, C10100 oxygen-free electronic copper, or C11000 ETP copper Alternative Materials C10400 or C10700 silver-bearing copper; C18150 CuCrZr subject to application review Material Standard Selected according to copper grade, starting form, and purchase specification Main Body Outside Diameter Reference design range: 40–320 mm Main Bore Diameter Reference design range: 25–260 mm Main Body Length Reference design range: 60–600 mm Bore / Groove-Root Diameter Tolerance Reference target: ±0.015 to ±0.03 mm on designated features End-to-End Bore Coaxiality Reference target: ≤0.02 mm; datum and evaluation method required Branch Alignment Reference target: ≤0.025 mm; controlled feature and datum scheme to be defined Functional Surface Roughness Reference target: Ra 0.2–0.4 μm; specify the maximum permitted value for each surface Hardness Reference range: 85–135 HV; dependent on grade, condition, and test location Electrical Conductivity Grade- and condition-specific acceptance value to be agreed Surface Options Bare copper, agreed anti-tarnish treatment, silver plating, tin plating, or nickel plating Silver Plating Thickness Reference option: 10–30 μm on specified surfaces Documentation Material and inspection documents according to the purchase order -
Custom Flanged Copper Terminal with D-Cut Stem
Parameter Reference Specification / Requirement Product Type Custom flanged copper terminal / conductive pedestal connector Main Geometry Circular flange, cylindrical transition section, and upper D-cut stem Pictured Flange Layout Four peripheral mounting holes with underside side-open recessed pockets Central Attachment Feature Axial internal thread on the underside of the flange Upper Connection Interface Flat contact pad with a lower shoulder and two transverse tapped holes Construction Option One-piece machining from solid stock, subject to drawing and process confirmation Primary Material Options C11000, C10200, or C10100 Alternative Materials C10400, C10700, C14500, or C18150 may be evaluated; these are not equivalent substitutes Flange Outside Diameter Reference range: 30–220 mm Stem Diameter Reference range: 15–140 mm Total Height Reference range: 30–300 mm Central Axial Thread Reference range: M8–M48; pitch, depth, and engagement length by drawing Transverse Threads Reference range: M6–M24; quantity and spacing by drawing Thread Specification Metric ISO 965, such as 6H, or ASME B1.1 Class 2B where specified Turned-Diameter Tolerance Reference target: ±0.015 to ±0.03 mm on designated features Contact-Pad Perpendicularity Reference target: ≤0.02 mm relative to the specified flange datum, over the defined feature length Central Thread Coaxiality Reference target: ≤0.015 mm relative to the specified datum axis; inspection method to be agreed Contact-Surface Roughness Reference target: Ra 0.2–0.4 μm; specify the required maximum for each functional surface Hardness Reference target: 85–125 HV, dependent on grade, condition, and test location Electrical Conductivity Requirement and verification method agreed for the selected material and condition Surface Options Bare copper, agreed anti-tarnish treatment, silver plating, tin plating, or nickel plating Silver-Plating Thickness Reference option: 5–30 μm, subject to coating specification and feasibility review Material Standard Selected according to grade and starting form, such as ASTM B187/B187M where applicable Inspection Documents Material records, dimensional reports, thread inspection results, and coating reports as agreed -
Custom L-Shaped Copper Terminal Lug with Hexagonal Recess
Parameter Reference Specification / Requirement Product Type Custom L-shaped copper connection terminal Main Geometry Rounded-end flat tang with a short nominal right-angle lip Face Features Two face holes; diameters, steps, and positions according to drawing Fastener Recess Hexagonal recess for a specified nut or bolt head Primary Material Options C11000, C10200, or C10100; grade and condition to be confirmed Alternative Materials C10400, C10700, or C18150 may be evaluated where different strength or thermal requirements apply; these are not equivalent substitutes Long Tang Length Reference range: 20–160 mm Short Lip Length Reference range: 6–60 mm Width Reference range: 10–100 mm Thickness Reference range: 3–18 mm Fastener Family Reference range: M4–M16; actual head or nut dimensions must be specified Hexagonal Pocket Fit Reference across-flats allowance: nominal +0.05 to +0.12 mm; mating fastener and final coated condition to be defined Bend Angle Nominal 90°; reference angular tolerance ±0.25°, subject to drawing confirmation Contact-Face Flatness Reference maximum deviation: 0.02–0.03 mm, depending on the specified face; agree one acceptance limit Surface Roughness Reference target: Ra ≤0.4 μm on designated surfaces Hardness Reference target: 85–125 HV; dependent on grade, condition, and test location Electrical Conductivity Requirement and test method to be agreed for the selected material and condition Surface Options Bare copper, agreed anti-tarnish treatment, tin plating, silver plating, or nickel plating Material Standard Applicable material standard selected according to grade and starting form, such as ASTM B187/B187M or ASTM B152/B152M Inspection Documents Material records, dimensional reports, coating reports, and other agreed documentation -
Custom 3D-Bent Copper Tubular Busbar
Parameter Reference Specification / Confirmation Requirement Product Form Bent copper tubular conductor with cylindrical and flat terminal interfaces Material Options for Review C11000, C10200 or C10100; grade, standard and temper to be agreed Tube Outside Diameter Reference range: 12–120 mm Tube Wall Thickness Reference range: 2–20 mm Developed Length Reference range: 100–3,500 mm; distinct from overall installed dimensions Bend Configuration Drawing-defined bend angles, radii, offsets and terminal orientation Cylindrical End Stepped diameter as shown; additional grooves or threads only when specified Flat Terminal Palm Two mounting holes as shown; outline, thickness and hole spacing by drawing End-to-End Position Reference coordinate deviation: ±0.2–0.5 mm, subject to agreed datums and measurement method Machined End Diameter Reference tolerance: ±0.02 mm, subject to feature and process review Palm Contact Flatness Reference target: ≤0.03 mm over the specified contact area Contact Surface Roughness Reference target: Ra 0.4–0.8 μm on designated surfaces Conductivity Acceptance value and test method to be agreed for the selected material Surface Treatment Copper finish, silver/tin/nickel plating or selective insulation, subject to review Material Documentation Certificate type, traceability and inspection scope agreed before ordering -
Custom Internally Threaded Copper Electrode Cup
Parameter Reference / Specification Product Form Internally threaded copper cup with stepped blind cavity and raised end boss Candidate Pure Copper Grades C10100, C10200, or C11000; grade and temper subject to confirmation Alternative Alloy Review C14500, C18150, or silver-bearing copper where application requirements justify a different property balance Outside Diameter Reference range: 8–120 mm Total Length Reference range: 20–300 mm Internal Geometry Stepped bore, internal shoulders, and blind-end geometry according to drawing Bore Depth Drawing-dependent; depth-to-diameter ratio, chip evacuation, and inspection access require review End Boss Diameter, height, and central recess geometry according to drawing Internal Thread Metric or Unified thread; diameter, pitch, class, and engagement length to be specified OD / ID Tolerance Reference target: ±0.01–0.02 mm on designated features Bore-to-OD Coaxiality Reference target: 0.015–0.025 mm; datum system and evaluation method must be defined Blind-End Thickness Tolerance Reference target: ±0.02 mm Surface Roughness Reference target: Ra 0.2–0.4 μm on specified surfaces Hardness Reference range: 85–135 HV; dependent on material grade and condition Electrical / Thermal Properties Confirm by selected grade, temper, temperature, and applicable test requirements Surface Treatment Bare machined copper, anti-tarnish treatment, or specified silver, nickel, or tin coating subject to review Operating Ratings Current, voltage, temperature, pressure, and vacuum limits require application-specific approval -
Monoblock Staggered L-Shaped Copper Terminal Lug
Item Reference Specification Product Type Staggered L-shaped terminal lug / Orthogonal copper busbar connector Construction One-piece design; blank selection and manufacturing route subject to drawing review Material Options C11000, C10200, C10100, T2, TU1 or TU2, subject to specification and availability confirmation Overall Length Reference range: 15–200 mm Overall Width Reference range: 12–150 mm Overall Height Reference range: 15–160 mm Wing Thickness Reference range: 3.0–25.0 mm Connection Geometry Offset mounting ears on two perpendicular wings Outer Profile Rounded mounting-ear ends with drawing-defined radii Hole Features Cylindrical counterbore on one wing and conical countersink on the other Countersink Angle Drawing-defined; source references include 90° or 120°, depending on the fastener Locating Feature Stepped shoulder or recessed seat, where specified Wing Perpendicularity Reference requirement: ≤0.02 mm; datum and evaluation length must be defined Hole Position / Center Distance Source reference tolerance: ±0.02–0.04 mm; drawing and datum scheme govern inspection Contact-Face Flatness Reference requirement: ≤0.02 mm Surface Roughness Reference requirement: Ra ≤0.4 μm on designated surfaces Hardness Source reference: 85–125 HV; confirm material, temper and test conditions Electrical Conductivity Grade-dependent; any minimum IACS requirement must be agreed and verified Surface Options Bare copper, anti-tarnish treatment, silver plating, tin plating or nickel plating Material Standard Specify the grade and applicable product-form standard, such as ASTM B187/B187M or EN 13601 where appropriate Inspection Documents Material and dimensional reports according to the agreed order requirements -
Monoblock Cantilevered Hammerhead Pure Copper Stationary Blade Contact
Item Reference Specification Product Type Monoblock stationary blade contact / knife contact terminal Material Pure copper; C11000, C10200, T2, TU1 or TU2 may be considered subject to drawing and order confirmation Visible Geometry Flat dual-hole base flange, raised blade section, hammerhead-style retaining area and integral root reinforcement Overall Dimensions Custom drawing-based design; source reference range: length 25–280 mm, width 20–180 mm, total height 20–160 mm Blade Thickness Reference tolerance ±0.015–0.03 mm; final value to be confirmed Blade-to-Base Perpendicularity Reference value ≤0.02 mm; confirm by drawing Base Contact Face Flatness Reference value ≤0.015–0.025 mm Working Surface Roughness Reference value Ra ≤0.2–0.4 μm Hardness H02 or H04 temper may be considered; reference hardness 90–130 HV Surface Finish Bright copper, anti-tarnish passivation, tin plating, nickel plating or silver plating Plating Optional hard silver plating, tin plating or nickel plating; thickness and area to be specified Reference Standards ASTM B187, ASTM B152, ASTM B133, EN 13601, EN 13605, JIS H3140 or GB/T 5585 may apply depending on grade and order Electrical Performance Conductivity and temperature-rise requirements to be verified according to material, cross-section and assembly design Inspection Dimensional, surface, flatness, hardness, conductivity and plating checks according to the agreed inspection plan Application Draw-out switchgear, breaker contact assemblies, MCCs, disconnectors and custom high-current electrical equipment -
Dual-Bent Copper Contact Finger Strip
Item Reference Specification Product Type Dual-bent copper contact finger strip Main Material Options C11000, C10200 or C10100 copper Other Grade Options Cu-ETP, Cu-OF, TU1 or TU2, subject to standard and grade confirmation Overall Length 35–350 mm Strip Width 6–60 mm Strip Thickness 2–12 mm Central Mounting Section Flat body with two drawing-defined mounting holes Front Contact Geometry Lead-in ramp or angled contact end Rear Contact Geometry Stepped relief, returned bend or retaining hook according to drawing Front Bend Angle Reference range: 120°–165° Rear Bend Angle Nominal 90° where a hook or returned end is required Width / Thickness Tolerance Reference requirement: ±0.02 mm Dual-End Bend Angle Tolerance Reference requirement: ±0.3° Contact Ridge Height Reference requirement: ≤0.015 mm where a formed ridge is specified Contact-Zone Roughness Reference requirement: Ra 0.2–0.4 µm Hardness Reference range: 95–135 HV for a specified hard temper Mounting Holes Through-holes, countersunk holes or other details according to drawing Surface Options Bare copper, anti-tarnish treatment, silver plating, tin plating or nickel plating Optional Silver Thickness Reference range: 10–30 µm Conductivity Grade-specific value to be confirmed by material certificate and test method Applicable Material References ASTM B187, ASTM B152, ASTM B133, EN 13601, EN 13605, JIS H3140 or GB/T 5585 where applicable Supply Basis Approved drawing, confirmed material condition and agreed inspection plan -
Inverted T-Section Copper Stationary Contact Block
Item Reference Specification Product Type Inverted T-section copper stationary contact block Main Geometry Upright contact blade with horizontal mounting base Main Material Options C11000, C10200 or C10100 copper Other Material Designations Cu-ETP, Cu-OF, TU1 or TU2, subject to the selected standard Base Length 15–300 mm Base Width 15–180 mm Overall Height 15–160 mm Upright Blade Thickness 2.5–30.0 mm Base Flange Thickness 3.0–35.0 mm Blade Thickness Tolerance Reference requirement: ±0.015–0.03 mm Blade-to-Base Perpendicularity Reference requirement: ≤0.02 mm Base Contact-Face Flatness Reference requirement: 0.015–0.025 mm Blade Contact Surface Roughness Reference requirement: Ra 0.2–0.4 µm Hardness Reference 90–130 HV, depending on grade and temper Mounting Features Through-holes, tapped holes or counterbores according to drawing Thread Range M4–M20 where internal threads are required Contact Tip Rounded crest, chamfered lead-in or other specified profile Surface Finish Bare copper, anti-tarnish treatment, silver plating, tin plating or nickel plating Optional Silver Thickness Reference range: 10–30 µm Conductivity Grade-specific requirement to be confirmed by material certificate and test method Material Standards ASTM B187, ASTM B152, ASTM B133, EN 13601, EN 13605, JIS H3140 or GB/T 5585, where applicable Supply Basis Approved drawing, confirmed material grade and agreed inspection plan