Custom Copper Conductor Rod with Dual Internal Threads

Short Description:

Parameter Specification / Customization Basis
Product Type Copper conductor rod / contact stem
Construction One-piece rod body as specified
Material Pure copper; exact grade and temper to be confirmed
Main Profile Slim cylindrical shank with enlarged ends
End Interfaces Internal threads at both ends, as shown in the supplied product brief and photos
Thread Details Standard, nominal size, pitch, tolerance class and engagement depth per drawing
Threaded Bore Blind or through configuration, bore depth and bottom geometry per drawing
End Geometry End diameter, shoulder, collar and face details according to mating components
Transition Geometry Tapered or radiused transitions as specified
Overall Dimensions Length, shank diameter and end diameters per approved drawing
Alignment Requirements Straightness, concentricity and runout requirements defined by drawing
Surface Finish Bare copper or specified finish
Electrical Requirements Grade and conductivity requirements defined for the application
Optional Coating Silver, tin or other specified finish subject to design and process review

Product Detail

Product Tags

Video

Short Description

One-piece copper conductor rod with a slim cylindrical shank, enlarged ends and internal threads at both ends. The dumbbell-style profile provides a reduced central section between larger end interfaces. Thread size, engagement depth, material grade, overall dimensions and surface finish are specified according to the approved drawing and mating assembly.

Product Overview

This dumbbell-shaped copper conductor rod has a long, narrow cylindrical shank connecting two enlarged ends. The end faces contain internal threads, as shown in the supplied close-up images. The stepped and tapered transitions, thread geometry and end-face details can be defined to match the customer’s equipment interface.

Potential uses include switchgear or circuit-breaker conductor assemblies and bushing center conductors. Final application suitability depends on the equipment design, electrical duty, mechanical loads and validated assembly requirements. Cymber Metal’s Pure Copper range can be used to discuss material options; the exact copper grade and temper should be stated in the RFQ.

Key Features

Feature Practical Value
Dumbbell-Style Profile Combines a reduced central shank with larger end sections.
Dual Internal Threads Provides threaded interfaces at both ends for specified mating parts.
One-Piece Construction Avoids a body joint where the design requires a continuous conductor.
Enlarged End Sections Allow end interfaces to be dimensioned independently from the central shank.
Tapered Transitions Provide a gradual change between the shank and enlarged ends when specified.
Drawing-Based Dimensions Allows thread details, critical datums and assembly interfaces to match the equipment design.
Protective Packaging Options End protection can be specified to help prevent handling damage during shipment.

Manufacturing Process

The manufacturing route is selected after reviewing the drawing, copper grade, dimensions and order requirements. Local end forming may be evaluated where suitable; the photos alone do not establish the product’s manufacturing history.

Stage Process Scope
1. Drawing Review Confirm material, overall dimensions, end interfaces, threads and critical datums.
2. Material Selection Select copper stock to the specified grade, temper and documentation requirements.
3. Stock Preparation Prepare stock suitable for the specified shank and enlarged end sections.
4. End Forming, If Applicable Evaluate local forming or another suitable method for the enlarged ends.
5. CNC Turning Machine the shank, stepped ends and transition profiles.
6. Thread Machining Produce the internal threads and any specified counterbores or lead-ins.
7. Deburring and Cleaning Remove machining burrs and clean the finished part as required.
8. Optional Surface Treatment Apply specified plating or another approved finish if required.
9. Final Inspection Check agreed dimensions, threads, surface condition and required records.

Cymber Metal’s Fine Machining service is relevant for drawing-based machining review. If a plated finish is required, specify the coating, thickness and coverage for review with the Busbar Plating Shop.

Manufacturing & Quality Control

Control Area Inspection / Verification Scope
Material Verify the specified copper grade and temper against the agreed purchasing documents.
Overall Dimensions Inspect overall length, shank diameter and enlarged end dimensions.
End Profile Check shoulders, tapers, collars and face geometry against the drawing.
Internal Threads Verify thread standard, size, pitch, tolerance and usable engagement as specified.
Blind Bore Details Check bore depth and bottom geometry where these are critical requirements.
Alignment Inspect straightness, concentricity or runout according to the designated datums.
Surface Condition Check for burrs, handling damage and unacceptable machining marks.
Optional Plating Verify coating coverage and dimensions according to the agreed finish specification.
Documentation Provide material and inspection records as required by the purchase specification.

Inspection methods and acceptance criteria should be agreed before production. See Quality Assurance for Cymber Metal’s quality-control approach.

Typical Applications

These are potential applications based on the product geometry and brief. Final suitability depends on the equipment design and validation requirements.

Application Potential Role Design Considerations
Switchgear Assemblies Threaded conductor stem or internal connection rod Mating interfaces, clearances, current duty and mechanical loading
Circuit-Breaker Assemblies Contact or conductor component Operating motion, contact arrangement and equipment-specific validation
Wall Bushings Center conductor stem Bushing geometry, insulation system and interface dimensions
Gas-Insulated Equipment Internal conductor connection Assembly clearances and any separately specified sealing requirements
Disconnector Assemblies Threaded conductor or contact support Alignment, fastening and operating loads
Custom Power Equipment Drawing-specific copper conductor Temperature, current, environment and maintenance conditions

Frequently Asked Questions

Are both ends internally threaded?

The product brief describes dual internal threads, and the supplied close-up photos show threaded end faces. The thread size, pitch, class, depth and whether both ends use identical specifications should still be confirmed on the drawing.

Are the threaded bores blind or through holes?

The product brief describes blind internal-threaded bores, but the required bore configuration must be confirmed against the final drawing. Specify bore depth, bottom geometry and any counterbore or lead-in needed for assembly.

What is a dumbbell-shaped copper conductor rod?

It is a conductor rod with a narrower central shank and enlarged ends. In this product, the end faces also have internal threads. The profile and interfaces are customized to suit the mating parts and assembly requirements shown on the approved drawing.

Which copper grade should be specified?

Choose the grade and temper according to the required conductivity, mechanical properties, forming needs and service conditions. State the governing material standard in the RFQ. Grade names from different standards should not be treated as automatically equivalent.

Can the enlarged ends and center shank be customized independently?

Yes. The drawing can specify the overall length, shank diameter, end diameters, shoulders, transition radii and thread details. Include the mating component dimensions and critical assembly datums so that the interface can be reviewed.

Can the rod be supplied with silver or tin plating?

A specified coating can be reviewed. Identify the coating type, thickness, plated areas and any masking requirements. Thread fit and mating dimensions should account for coating buildup where plating applies to those surfaces.

Is this rod automatically suitable for high-voltage GIS or bushing service?

No. The product shape alone does not establish voltage, partial-discharge, temperature-rise or sealing performance. Those requirements depend on the complete assembly design, materials, clearances and validated tests.

What information is needed for a quotation?

Provide a dimensioned drawing, copper grade and temper, quantity, thread specifications, critical tolerances, surface finish and inspection-document requirements. Application details such as current duty, operating conditions and mating components help clarify manufacturing and material requirements.

RFQ Information

Required Information Details to Provide
Drawing Dimensioned PDF and STEP or another suitable 3D format
Material Copper grade, standard, temper and required documentation
Quantity Prototype quantity, order quantity and expected annual demand
Main Dimensions Overall length, shank diameter and enlarged-end diameters
Thread Details Standard, size, pitch, class, depth and blind/through configuration
End Interfaces Mating component, seating faces and any counterbore or lead-in
Critical Tolerances Straightness, runout, concentricity and interface requirements
Surface Finish Bare copper or specified coating, thickness and coverage
Quality Documents Required material records, inspection reports and additional testing
Application Equipment type, current duty, mechanical loads and service conditions
Delivery Destination, packaging requirements and target schedule

Send the drawing and requirements through Contact Us for material and manufacturing review.


  • Previous:
  • Next:

  • Write your message here and send it to us