Products
-
Custom Copper Offset T-Section Stationary Blade Contact with Extended Base
Parameter Specification Product Type Custom copper offset T-section stationary blade contact Material Pure copper as identified in the product notes; confirm grade, temper and standard Possible Copper Grades C11000, C10200 or another specified grade, subject to order confirmation Geometry Extended base with an orthogonally positioned blade-style contact feature Base Features Extended mounting base with a through-hole shown near one end; hole count and details to drawing Blade Features Upright, unpunched blade shown at the opposite end; profile and lead-in geometry to drawing Reference Dimensions Product notes list base length 40–350 mm, width 15–120 mm, thickness 4–25 mm, blade height 20–160 mm and blade thickness 3–20 mm. Reference ranges only; confirm final dimensions and feasibility by drawing Surface Finish Product notes mention tin, hard silver or nickel plating; confirm coating type, coverage and thickness Tolerances Blade thickness, perpendicularity, flatness and hole position to be agreed by drawing Electrical Rating Depends on conductor dimensions, mating contact, assembly and operating conditions Inspection Dimensional, hole-feature, surface and finish checks to the agreed inspection plan Documentation Material and inspection documents to be confirmed at RFQ stage Applicable Standards Specify required material and equipment standards in the RFQ; compliance is not established by the photographs -
Custom 1060 Aluminum Textured Busbar Connector Link and T-Bracket Kit
Parameter Specification Product Type Custom 1060 aluminum busbar connector link and T-bracket kit Material 1060 electrical aluminum as identified in the supplied product notes; confirm temper, standard and material documents Kit Contents Textured link and T-shaped brackets shown in the group photo; confirm quantity and included components Link Features Annular raised feature with central hole, two holes along the link, and a formed end stop, as shown Bracket Features T-shaped perpendicular support components with mounting holes; hole count and layout to drawing Surface Texture Raised grid-like pattern visible on the link and bracket contact faces; geometry and coverage to drawing Reference Dimensions Supplied notes list general ranges of 2.5–25 mm thickness, 15–180 mm width and 30–600 mm length. These are references only; confirm dimensions and feasibility for each component Surface Finish Supplied notes mention tin, nickel or silver plating, or conductive passivation. Confirm aluminum pretreatment, coating compatibility, coverage and thickness Tolerances Dimensions, hole positions, forming and fit requirements to be agreed by drawing Electrical Rating Depends on the conductor dimensions, joint design, mating surfaces and operating conditions Inspection Dimensional, hole-feature, surface and finish checks to the agreed inspection plan Documentation Material and inspection documents to be confirmed at RFQ stage Applicable Standards Specify required material and equipment standards in the RFQ; compliance is not established by the photographs -
Custom Silver-Plated Pure Copper T-Section Stationary Knife Contact with Orthogonal Blade
Parameter Specification Product Type Custom copper T-section stationary contact / orthogonal blade terminal Material Pure copper as identified in the supplied product notes; confirm grade, temper and standard for the order Possible Grade Options C11000, C10200 or another specified grade, subject to confirmation Geometry Mounting base with an orthogonally positioned blade-style contact feature Blade Lead-In Beveled or shaped lead-in described in the supplied notes; final profile to drawing Base Feature Recessed mounting hole visible in the photographs; hole and counterbore dimensions to drawing Reference Dimensions Supplied notes list base length 30–250 mm, width 15–120 mm, thickness 5–30 mm, blade height 20–150 mm and blade thickness 3–20 mm. These are reference values only; confirm feasibility and final dimensions by drawing Surface Treatment Supplied notes specify full-surface hard silver plating. Confirm coating type, coverage and thickness; photos alone cannot verify the coating Reference Silver Thickness Supplied notes list 10–30 μm; confirm the required value and inspection method before ordering Construction Route One-piece or joined/composite route to be defined by the drawing and order; not confirmed by the photographs Tolerances Blade thickness, perpendicularity, flatness and hole position to be agreed by drawing Electrical Rating Depends on material, dimensions, mating contact, assembly and operating conditions Inspection Dimensional, visual, hole and surface checks to the agreed inspection plan Documentation Material and inspection documents to be confirmed at RFQ stage Applicable Standards Specify required material and equipment standards in the RFQ; compliance is not established by the photographs -
Custom Copper Conductor Link Rod with Flat Mounting Lugs
Item Specification Product Type Custom copper conductor link rod / busbar connection rod Main Profile Round shaft with flattened mounting lugs at both ends Material Copper grade and temper to be specified and confirmed for the order Overall Length To approved drawing Shaft Diameter To approved drawing End Lugs Width, thickness, transition shape and orientation to drawing Mounting Holes One hole visible at each end; round or slotted geometry and dimensions to be confirmed from the drawing Surface Finish Photographs show a silver-colored appearance; coating type and thickness are not visually confirmed Tolerances Length, straightness, lug dimensions, hole locations and alignment to be agreed Electrical Rating Depends on material, conductor dimensions, joint design and operating conditions Inspection Dimensions, hole features, surface condition and other agreed criteria Documentation Material records and inspection documents to be confirmed before order placement -
Custom T-Shaped Copper Busbar Connector with Textured Contact Surfaces
Item Specification Profile Offset T-shaped configuration with a rectangular base and upright plate Material Copper grade and temper to specification; C11000 or C10200 subject to confirmation Dimensions and Tolerances Overall dimensions, flatness, perpendicularity, and hole positions according to the approved drawing Base Holes Two staggered through-holes and four threaded fixing holes in the illustrated design Upright One through-hole and shaped upper corners Surface Grid-like texture; pattern, coverage, and finish to specification Electrical Rating Determined by conductor dimensions, joint design, and operating conditions Inspection Dimensions, hole positions, threads, and surface condition to the agreed inspection plan Documentation Material records and inspection reports as agreed before ordering -
Custom 90-Degree L-Shaped Pure Copper Busbar Bracket with Two Mounting Holes
Parameter Specification Product type Custom L-shaped copper busbar bracket / electrical connection plate Material Pure copper as identified in the supplied product notes; confirm exact grade and temper Geometry Nominal 90-degree L shape Mounting holes Two shown, one on each leg; through-hole or tapped-hole details to be specified Reference dimensions Supplied notes list long leg 20–300 mm, short leg 12–200 mm, width 10–120 mm and thickness 2–15 mm. Confirm feasibility and final dimensions by drawing Bend radius and angle tolerance Specify on drawing and confirm before production Surface finish Bare copper or optional finish by order requirement and feasibility Edge condition Deburring or edge rounding can be specified Inspection Dimensional and visual checks to agreed drawing and order requirements Documentation Material and inspection documents to be confirmed at RFQ stage Applicable standards Specify the required material and product standards in the RFQ -
Selective-Finish Copper Bushing Stem with Two-Hole Palm
Item Specification Product type Copper bushing stem with two-hole flat palm Material options C10200, C10100, C11000, Cu-OF, Cu-ETP, TU1, TU2 or T2 are listed in the supplied brief; confirm grade and standard Total height × maximum diameter × palm thickness Reference ranges in supplied brief: 40–500 mm × Ø20–150 mm × 6–45 mm; confirm drawing and feasibility Upper palm Two through-holes visible; confirm hole size, spacing, chamfers and palm dimensions Mid-section band Copper-colored band visible; confirm its material, construction, and whether it is intentionally unplated Base Circular base with central threaded opening visible; confirm thread type, size, depth and fit Sealing features O-ring grooves are listed in the brief but are not clearly verifiable in the photos; specify only if confirmed by drawing Surface finish Bright machined surfaces are visible; confirm any selective plating and the areas to be finished Standards Specify material and equipment standards in the RFQ; references in the brief require applicability review Inspection Dimensions, threads, hole positions and finish to an agreed inspection plan Documentation Material certificate and inspection records to be confirmed before order placement Packing Specify protection for threads and machined contact faces -
Custom Copper Bushing Stem with Two-Hole Flat Palm
Item Specification Product type Custom copper bushing stem with flat terminal palm Material options C10200, C10100, C11000, Cu-OF, Cu-ETP, TU1, TU2 or T2 are listed in the supplied brief; confirm exact grade and standard Overall length × flange diameter × stem diameter × palm thickness Reference ranges in supplied brief: 50–800 mm × Ø20–140 mm × Ø12–100 mm × 4–40 mm; confirm drawing and feasibility Base features External thread, flange and end opening as specified; confirm thread form, pitch, fit and hole depth Stem Cylindrical transition section to drawing Terminal palm Flat palm with two through-holes visible; confirm hole diameter, spacing, chamfer and edge profile Sealing features The brief mentions an O-ring groove, but this is not clearly verifiable in the photos; include only if confirmed by drawing Surface finish Bright machined surfaces are visible; specify required finish Plating options Silver, nickel or tin are listed in the supplied brief; confirm actual coating, areas and requirements Standards Specify material and equipment standards in the RFQ; references in the brief require applicability review Inspection Dimensional inspection and any agreed tests to the order-specific inspection plan Documentation Material certificate and inspection records to be confirmed before order placement Packing Specify protection for threads and machined contact faces -
Cylindrical-to-Drum GIS Busbar Terminal
Item Specification Product type Cylindrical-to-drum GIS busbar terminal Aluminum material options A356-T6, 6061-T6, 6101-T6 or 6082-T6 are listed in the supplied brief; confirm grade and process route Copper material options C10200, C11000 or C18150 are listed in the supplied brief; confirm exact grade and standard Cylindrical-end OD × drum-head diameter × length Reference ranges in the supplied brief: Ø30–220 mm × Ø40–260 mm × 50–450 mm; confirm drawing and feasibility Cylindrical-base features Mating collar, central threaded opening and additional locking holes as specified Drum-style contact features Center locating or through-hole and threaded holes as shown; confirm face orientation and pattern by drawing Radial feature Threaded hole on the outer body is visible; purpose and dimensions to be confirmed Surface finish Textured body and machined bright surfaces are visible; specify finish requirements Optional surface treatment Silver or tin plating is mentioned in the brief; confirm substrate, plated areas and specification Standards Customer-specified material and equipment standards. References in the supplied brief require applicability review; no compliance is claimed here Inspection Dimensions, hole positions, threads and surface condition to an agreed inspection plan Documentation Material certificates and inspection records to be confirmed before order placement Packing Specify protection for machined faces and export-packing requirements Material choices can be reviewed against our Aluminum Alloy and Pure Copper ranges.
-
90-Degree GIS Elbow Conductor | Custom Busbar Corner Connector
Item Specification Product type Custom 90-degree GIS elbow conductor Aluminum material options A356-T6, 6061-T6, 6101-T6, 6082-T6 or other specified grade; confirm process route and standard Copper material options C11000, C10200 or CuCrZr are listed in the supplied brief; confirm exact grade and specification Large-end OD × small-end OD × arm length Reference ranges in supplied brief: Ø50–320 mm × Ø30–220 mm × 80–600 mm; confirm drawing and feasibility End configuration Flanged end, central opening, mating collars and other details to drawing Hole pattern Number, pitch circle, thread type and depth to approved drawing Elbow geometry Nominal 90-degree connection; angle and end-face relationship to drawing External finish Textured body and machined bright end surfaces are visible in the images; specify required finish Optional surface treatment Silver or tin plating is mentioned in the brief; confirm substrate, coating area and specification Standards Customer-specified material and equipment standards. References in the supplied brief require applicability review; no compliance is claimed here Inspection Dimensional, material and other checks to an agreed inspection plan Documentation Material certificate and inspection reports to be confirmed before order placement Packing Specify protection for machined ends and export-packing requirements -
90-Degree GIS Elbow Contact Housing | Custom Busbar Connector
Item Specification Product type Custom 90-degree elbow contact housing Material options Copper grades listed in the supplied brief: C10200, C11000, C18150; aluminum alloys listed: 6101-T6, 6061-T6, 6063-T6, 6082-T6, A356-T6. Confirm the selected grade and standard Mating bore × sleeve OD × envelope Reference ranges in the supplied brief: Ø20–220 mm × Ø35–300 mm × 60–500 mm; not guaranteed stock dimensions Internal features Stepped bore, socket grooves, lead-in and other details to drawing Cross-axis geometry Perpendicular bore arrangement as specified; tolerances to be stated on the drawing External profile Housing contour and transition radii to drawing Surface finish Silver or tin plating, anodizing or passivation are mentioned in the brief; confirm material compatibility and required finish Standards Customer-specified material and equipment standards. References in the brief require applicability review; no compliance is claimed here Inspection Dimensions, geometry, surface and any functional tests to an agreed inspection plan Documentation Material certificates and inspection records to be confirmed before order placement Packing Specify protection and export-packing requirements with the RFQ -
Monoblock Slotted Tulip Contact Sleeve
Item Specification Product form Monoblock slotted contact sleeve / multi-finger tulip contact Candidate materials C10200, C10100, C11000, C18150; other listed alloys subject to confirmation Outer diameter, bore and length Reference ranges in supplied brief: Ø16–160 mm OD, Ø10–125 mm bore, 35–300 mm length; confirm drawing and feasibility Finger configuration Reference options: 6, 8, 12, 16, 20 or 24 fingers; confirm by drawing Slot geometry Reference slot width: 1–4 mm; slot count, root geometry and dimensions require drawing review Spring grooves Single, dual or multiple circumferential grooves, as specified Internal geometry Bore, lead-in and contact-band geometry to drawing Mounting features Base collar and mounting or pin holes as specified Surface finish Silver, graphite-silver, tin or nickel finish listed in supplied brief; verify actual finish and coating specification Tolerances Bore, roundness, slot and mounting tolerances to be defined on the drawing Applicable standards Specify required material and equipment standards; assess applicability and acceptance criteria before order Inspection Inspection scope and test methods to be agreed for the product and order Documentation Material certificate and dimensional or plating records to be confirmed before order placement Material selection can be reviewed against our Pure Copper and Chromium Zirconium Copper ranges. Listed grades are options from the supplied product brief, not a statement that every grade is interchangeable or available in every configuration.