Custom Insulated Copper Tubular Busbar with Threaded Ends

Short Description:

Parameter Specification / Customization Basis
Product Type Insulated copper tubular busbar / conductor tube
Conductor Material Copper; exact grade and temper to be specified
Tube Construction Tube form; manufacturing condition to be confirmed by specification
Insulation Red insulating layer shown; material, method, thickness and performance per specification
Insulation Coverage Covered length, exposed end zones and cutback positions per drawing
End Features Stepped bare-copper collar and threaded connection interfaces as specified
Thread Details Standard, size, pitch, tolerance class and engagement depth per drawing
Tube Dimensions Outside diameter, wall thickness and overall length per drawing
Port Geometry Bore, counterbore, end face and lead-in details per drawing
Surface Finish Bare copper contact zones or specified finish
Optional Plating Selective silver or tin plating subject to design review
Electrical Requirements Conductor and insulation requirements defined by the equipment specification
Inspection Requirements Dimensions, threads and insulation checks agreed before production

Product Detail

Product Tags

Video

Short Description

Custom copper tubular conductor with a red insulating layer, exposed copper end features and threaded connection ports as specified. Tube dimensions, thread details, insulation coverage and end geometry are defined by the approved drawing and mating assembly requirements.

Product Overview

This insulated copper tubular busbar has a long cylindrical body covered by a red insulating layer, with copper end sections exposed for connection. The photos show a stepped collar at one end and a female-threaded port in the close-up. The product brief describes internal threads at both ends; confirm the geometry of each port against the drawing.

This design may suit compact electrical assemblies where a formed tubular conductor and insulated central section are required. The visible color does not establish the insulation material, dielectric performance or voltage rating. Specify the copper grade, insulation system, coverage, end interfaces and required electrical tests for the application. Cymber Metal’s Pure Copper range is a starting point for discussing conductor material options.

Key Features

Feature Practical Value
Red Insulated Body Separates the covered conductor surface from other components as defined by the assembly design.
Exposed Copper Ends Provide accessible connection zones where specified.
Stepped End Collar Offers a configurable shoulder or mating profile for the end interface.
Threaded Connection Ports Accommodate specified threaded studs or mating components.
Tubular Conductor Form Provides a hollow conductor profile; any fluid or gas service must be separately specified and validated.
Defined Insulation Cutback Allows the exposed contact length and insulation termination to match the drawing.
Drawing-Based Configuration Coordinates conductor dimensions, insulation coverage and end interfaces for the intended equipment.

Manufacturing Process

The manufacturing and insulation route should be established after reviewing the tube specification, end features, insulation requirements and application. The photos do not determine the insulation material or production method.

Stage Process Scope
1. Drawing Review Confirm conductor dimensions, threads, collar features, insulation coverage and inspection requirements.
2. Material Selection Specify the copper grade, temper and documentation requirements.
3. Tube Preparation Prepare and cut the copper tube to the required blank dimensions.
4. End Machining Machine the specified collars, bores, counterbores and internal threads.
5. Surface Preparation Prepare the covered section and exposed contact zones according to the selected insulation process.
6. Insulation Application Apply the specified insulating layer or sleeve using the approved method.
7. Insulation Trimming Finish the insulation ends to the specified cutback and exposed contact lengths.
8. Optional Contact Finish Apply specified plating to defined bare-copper contact areas if required.
9. Final Inspection Check dimensions, threads, insulation coverage and any specified electrical tests.

Cymber Metal’s Fine Machining service can be considered for the end-interface machining review. If a plated finish is required, define the coating type, thickness and coverage for review with the Busbar Plating Shop.

Manufacturing & Quality Control

Control Area Inspection / Verification Scope
Material Verify the copper grade and temper against the agreed purchasing documents.
Tube Dimensions Inspect outside diameter, wall thickness and overall length as specified.
End Geometry Check collar dimensions, exposed contact length and end-face features.
Internal Threads Verify thread standard, size, pitch and fit using the agreed method.
Port Position Check end alignment and position against drawing datums.
Insulation Coverage Inspect covered length, cutback position and visible surface condition.
Insulation Testing Apply specified thickness, continuity, withstand-voltage or partial-discharge tests only when included in the agreed inspection plan.
Contact Zones Inspect exposed copper surfaces and any specified plating.
Documentation Provide material and inspection records as required by the purchase specification.

Inspection methods and acceptance criteria should be agreed before production. See Quality Assurance for Cymber Metal’s quality-control approach.

Typical Applications

These are potential applications based on the product form. Final suitability depends on the equipment design and validation requirements.

Application Potential Role Design Considerations
Switchgear Assemblies Insulated conductor section or tubular busbar connection Voltage class, clearances, insulation system and end interfaces
Gas-Insulated Switchgear Compact internal conductor route Equipment-specific insulation coordination and interface design
Ring Main Units Insulated tubular conductor between connection points Enclosure layout, phase spacing and terminal geometry
Compact Substations Busbar connection within a constrained assembly Insulation requirements, conductor duty and mounting arrangement
Power Converters Insulated conductor or busbar segment Current duty, temperature rise, cooling and mechanical support
Energy-Storage Equipment Tubular conductor connection System voltage, thermal conditions and validated insulation requirements

Frequently Asked Questions

What is an insulated copper tubular busbar?

It is a copper tube conductor with an insulating layer over a specified portion of its surface. Bare copper zones may remain exposed at the ends for connection. The insulation type, coverage and electrical performance should be defined by the application specification.

What material is the red insulating layer?

The photos show a red outer layer but do not establish its material. Specify whether the design requires a sleeve, heat-shrink material, molded insulation or an applied coating, together with relevant thickness, temperature and electrical requirements.

Are both ends internally threaded?

The product brief describes threaded interfaces at both ends, and one photo clearly shows a female-threaded port. Confirm each end’s thread standard, size, pitch, tolerance class and engagement depth on the approved drawing.

Can the exposed copper length be customized?

Yes. Define the insulation cutback location, exposed contact length, collar dimensions and any required transition between the insulation and copper interface. These details affect assembly fit and should be shown on the drawing.

Does the red insulation make the product suitable for high voltage?

Not by itself. Suitability depends on the insulation material, thickness, geometry, environmental conditions and the complete assembly’s electrical validation. Specify the required voltage and test criteria rather than inferring a rating from color or appearance.

Can the exposed copper ends be plated?

Selective plating can be reviewed when specified. Identify the plating type, thickness and areas to be plated. Also define any masking requirements and account for coating buildup at threaded or mating interfaces.

Can the tube be used for cooling water?

The photos and brief identify a tubular conductor, but they do not confirm pressure capability or suitability for coolant service. If fluid service is intended, specify the medium, pressure, flow, sealing method and leak-test requirements for separate review.

What information is needed for a quotation?

Provide a dimensioned drawing or 3D model, copper grade, tube dimensions, thread details, insulation material and coverage, quantity, tolerances, finish and inspection requirements. Include the equipment application and any required electrical tests.

RFQ Information

Required Information Details to Provide
Drawing Dimensioned PDF and STEP or another suitable 3D format
Copper Material Grade, standard, temper and required documentation
Quantity Prototype quantity, order quantity and expected annual demand
Tube Dimensions Outside diameter, wall thickness and overall length
End Features Collar dimensions, threads, bores and mating-component details
Thread Details Standard, size, pitch, tolerance class and engagement depth
Insulation Material, method, thickness, covered length and cutback positions
Electrical Requirements Application voltage, clearances and required validation tests
Surface Finish Bare copper or specified plating, thickness and coverage
Inspection Dimensional checks and any specified insulation or leak tests
Delivery Destination, packaging requirements and target schedule

Send the drawing and requirements through Contact Us for material and manufacturing review.


  • Previous:
  • Next:

  • Write your message here and send it to us