banner01

Products

  • Pure Copper Busbar for Electrical Distribution

    Pure Copper Busbar for Electrical Distribution

    Item Specification
    Material grade Specify C11000, C10200, C10100 or another agreed grade
    Applicable standard Define on the RFQ; ASTM B187/B187M, EN 13601 or GB/T 5585.1 may be considered where applicable
    Temper H02, O60 or H04 may be requested; confirm against grade and product standard
    Thickness and width Reference range: 2–30 mm × 10–400 mm; confirm available sizes and tolerance
    Length 4,000 mm, 5,800 mm, 6,000 mm or custom; confirm before ordering
    Edge profile Rounded, full-radius or square edge; confirm drawing and edge requirements
    Surface finish Bare copper or specified coating/covering, subject to order confirmation
    Inspection Inspection scope and acceptance criteria to be agreed for each order
    Documentation Material certificate and other requested documents to be confirmed before order placement
    Packing Confirm protection, bundle, pallet or export-packing requirements with the RFQ
  • Pure Copper Square and Rectangular Bar Stock

    Pure Copper Square and Rectangular Bar Stock

    Item Specification
    Product Form Solid copper square bar or rectangular/flat bar
    Copper Grades C11000, C10200 and C10100 are listed in the supplied brief; exact grade to be confirmed
    Other Designations Cu-ETP, Cu-OF, T2, TU1 and TU2 appear in the supplied brief; confirm grade equivalence against the required standard and certificate
    Temper / Condition H02, H04 and O60 are listed in the supplied brief; confirm the required condition and applicable designation system
    Flat-Bar Section Reference range: 15–100 mm thickness × 20–300 mm width
    Square-Bar Section Reference range: 15 × 15 mm to 120 × 120 mm
    Example Sections 30 × 60, 30 × 65, 30 × 70, 30 × 80, 35 × 35, 35 × 40, 35 × 45, 35 × 60, 35 × 65, 35 × 70, 40 × 40, 40 × 70, 40 × 80 and 50 × 50 mm
    Length Reference range: 2000–6000 mm; confirm current supply length
    Edge Profile Square edge or small-radius edge, as specified and confirmed
    Applicable Standard ASTM B187 is listed in the supplied brief; confirm suitability for the selected grade, form and order
    Tolerances Section dimensions, perpendicularity, straightness and cut length to the approved specification
    Cutting Cut-to-length service subject to saw capacity, dimensions and required tolerance
    Inspection Material, dimensions, surface and straightness checks; conductivity or ultrasonic testing only if agreed and performed
    Documentation Material certificate and inspection records as specified in the order
    Packing Surface protection and bundled or crated packing according to shipping requirements
  • 1060 Electrical-Grade Aluminum Strip Coil

    1060 Electrical-Grade Aluminum Strip Coil

    Item Specification
    Product Form Aluminum strip coil / aluminum foil coil
    Alloy AA 1060 listed as the primary alloy in the supplied brief; other listed grades include 1050A, 1070, 1350, 3003 and 5052
    Temper O, H14/H24 or H18 listed in the supplied brief; confirm the required temper and its suitability for the application
    Cold-Rolled Strip Thickness Reference range in supplied brief: 0.15–4.0 mm
    Thick Continuous-Coil Form Reference range in supplied brief: 3.0–10.0 mm, subject to confirming the product form and route
    Precision Narrow-Strip Width Reference range in supplied brief: 10–200 mm
    Wide Strip / Foil Width Reference range in supplied brief: 200–1600 mm
    Coil Inner Diameter Options listed in supplied brief: Ø150, Ø200, Ø300, Ø400 and Ø500 mm
    Edge Condition Precision slit edge or conditioned/rounded edge, as specified and confirmed
    Coil Geometry Coil weight, outer diameter, inner diameter, telescoping and camber requirements to be defined in the RFQ
    Surface As supplied or processed according to the order specification
    Production Route Rolling, slitting, recoiling and optional annealing, depending on material form and order requirements
    Applicable Standard To the agreed product form and purchase specification; confirm standard applicability before listing
    Tolerances Thickness, width, flatness, edge and coil tolerances according to the approved specification
    Inspection Material, dimensions, surface and coil condition checks as agreed
    Documentation Material certificate and inspection records as specified in the order
    Packing Protective wrapping and coil restraint; export packing details to be agreed
  • Custom Laminated Copper Foil Flexible Busbar

    Custom Laminated Copper Foil Flexible Busbar

    Item Specification
    Product Form Laminated copper foil flexible busbar, shunt or custom flexible link
    Copper Grade To the agreed order specification. Grades listed in the supplied brief include C10100, C10200, C11000, Cu-ETP, Cu-OF, T2, TU1 and TU2; confirm grade and standard by material documentation
    Foil Thickness Reference options in supplied brief: 0.03, 0.05, 0.10, 0.15, 0.20 and 0.30 mm per foil
    Layer Count Reference range in supplied brief: 5–500 layers; confirm design feasibility
    Total Thickness Reference range in supplied brief: 1–50 mm
    Width Reference range in supplied brief: 10–300 mm
    Overall Length Reference range in supplied brief: 50–2000 mm
    Flexible Section Flat or formed configuration such as S, Z, U/Ω or a specified twist, subject to drawing review
    Terminal Design Solid or consolidated terminal areas; terminal dimensions, holes and connection faces to drawing
    Joining Method To the approved manufacturing route. Confirm the specific method before stating diffusion bonding as a product claim
    Surface Finish Bare copper or specified finish; optional tin or silver plating only when confirmed for the order
    Insulation Optional insulation or protective covering, subject to design and process confirmation
    Tolerances Set by the approved drawing and manufacturing review
    Electrical Requirements Current, temperature rise, resistance and other acceptance values to be specified and validated for the assembly
    Inspection Material and dimensional checks; electrical, bond or coating checks as agreed in the inspection plan
    Documentation Material certificates and inspection records as specified in the order
    Packing The supplied photos show individual protective sleeves and wooden-crate packing; confirm final packing requirements per shipment
  • Large-Diameter C63000 Nickel Aluminum Bronze Disc

    Large-Diameter C63000 Nickel Aluminum Bronze Disc

    Item Specification
    Product Large-Diameter C63000 Nickel Aluminum Bronze Disc / Round Plate
    Primary Alloy UNS C63000 nickel aluminum bronze
    Equivalent Designations CuAl10Ni5Fe4, CW307G and QAl10-4-4, subject to standard confirmation
    Nominal Composition Copper balance; aluminum, nickel, iron and manganese ranges according to the agreed standard
    Related Grades C63200, C63020 and C61400 may be reviewed separately
    Applicable Standards ASTM, AMS, EN, DIN, BS or GB/T standards according to product form and order specification
    Indicative Diameter Approximately Ø150–2500 mm
    Indicative Thickness Approximately 25–450 mm
    Unit Weight Approximately 20–6000 kg, depending on size and density
    Supply Condition Hot-forged, annealed, quenched and tempered, or another agreed condition
    Machining CNC turning, facing, boring, drilling, groove machining, chamfering and deburring
    Machining Allowance Additional material may be reserved for final customer machining where required
    Surface As-forged, machined, turned, cleaned or otherwise specified
    Dimensional Control Diameter, thickness, flatness, parallelism, concentricity and drawing-defined features
    Mechanical Testing Tensile strength, yield strength, elongation and hardness when specified
    NDT Options Ultrasonic, liquid penetrant or other inspection methods when included in the order plan
    Documentation Material certificate, dimensional report, heat-treatment records and inspection reports as agreed
    Packing Fumigated wooden crates, internal supports, protective film and moisture barrier
  • 1060 Pure Aluminum Sheet & Plate

    1060 Pure Aluminum Sheet & Plate

    Item Specification
    Product 1060 Pure Aluminum Sheet & Plate
    Alloy AA 1060 / EN AW-1060A
    Aluminum Content Al ≥99.60% according to the supplied product brief; final chemistry confirmed by material certificate
    Related Grades 1050/1050A, 1070, 1100, 3003, 5052, 6061 and 6101 can be reviewed separately
    Available Tempers 1060-O, H14, H24, H18 and H112
    Sheet Thickness Approximately 0.3–6.0 mm
    Plate Thickness Approximately 8.0–100.0 mm
    Width Approximately 500–2500 mm
    Length Approximately 1000–6000 mm
    Common Stock Sizes 1000 × 2000 mm, 1220 × 2440 mm, 1250 × 2500 mm and 1500 × 3000 mm
    Electrical Conductivity Approximately 61.0–62.0% IACS according to the supplied specification
    Thermal Conductivity Approximately 230–234 W/(m·K), subject to grade, temper and test method
    Density Approximately 2.71 g/cm³
    Surface Bright mill finish or other agreed surface condition
    Protective Film One- or two-side blue PE film for scratch and surface protection
    Applicable Standards ASTM B209, ASME SB209, EN 485, EN 573-3, JIS H4000, GB/T 3880 and GB/T 3190, as specified
    Processing Options Cutting, shearing, slitting, leveling, laser cutting and drawing-based processing
    Optional Surface Processing Tin or nickel plating may be reviewed where technically suitable
    Packaging Fumigated wooden pallets, moisture barrier, edge protectors and high-strength strapping
    Inspection Chemistry, dimensions, thickness, flatness, surface condition, conductivity or mechanical properties as agreed
    Documentation Material test certificate, dimensional report and applicable inspection records according to order requirements
  • 1060 Electrical-Grade Aluminum Busbar

    1060 Electrical-Grade Aluminum Busbar

    Item Specification
    Product 1060 Electrical-Grade Aluminum Busbar
    Primary Alloy 1060; the supplied brief specifies Al ≥99.60%. Confirm by batch certificate.
    Other Listed Alloys 1050A, 1070, 1350, 6101, and 6063; confirm availability and do not treat as direct equivalents.
    Tempers 1060-O, H12/H14, H18, F, and H112 are listed. Confirm by product form and order.
    Thickness × Width 1.5–40 mm × 10–300 mm, subject to manufacturing and stock confirmation.
    Supply Form Straight lengths listed as 2,000–6,000 mm; continuous coils are also listed.
    Example Sizes The supplied brief lists sizes from 3 × 30 mm to 12 × 120 mm. Current stock and sizes should be checked before quoting.
    Edge Profile Square, rounded-corner, or full-radius options are listed.
    Electrical Conductivity 61.0–62.5% IACS is listed at 20 °C; verify test method and batch result.
    Resistivity ≤0.0280 Ω·mm²/m is listed at 20 °C; confirm against the applicable specification.
    Density Approximately 2.70 g/cm³ is listed for aluminum.
    Tensile Strength 60–135 MPa is listed depending on temper; confirm the selected temper and test report.
    Bend Performance A 90° bend without cracking is stated in the supplied brief; confirm test method, temper, and acceptance criteria.
    Surface Mill finish with oil film or dry surface is listed.
    Optional Finishes Tin, silver, or nickel plating; heat-shrink tubing; or epoxy coating are listed options, subject to order review.
    Candidate Standards ASTM B236, B209, B221; IEC 60105; EN 755 / EN 573-3; JIS H4040; GB/T 5585.2 and GB/T 3190 are cited in the supplied brief. Confirm the standard applicable to the exact alloy and product form.
  • Custom 4N High-Purity Copper Block

    Custom 4N High-Purity Copper Block

    Item Specification
    Product 4N High-Purity Copper Block
    Product Form Rectangular copper block / blank
    Purity 4N; the supplied brief lists Cu ≥99.99%–99.995%. Confirm by batch analysis.
    Grade C10100, Cu-OFE (CW009A), C1011, and TU0 / 4N-Cu are listed as possible designations; confirm the exact grade by certificate.
    Oxygen Content ≤2–5 ppm is listed in the supplied specification; verify with the applicable test report.
    Trace Metallic Impurities ≤50–100 ppm is listed; confirm test method and batch result.
    Electrical Conductivity ≥101–102% IACS is listed; confirm measurement method and result before publication.
    Thermal Conductivity ≥398–401 W/(m·K) is listed; confirm test conditions and documentation.
    Residual Resistivity Ratio (RRR) ≥150–400+ is listed; confirm test data and definition.
    Grain Size 20–80 μm is listed; confirm metallographic results.
    Flatness / Parallelism ≤0.02 mm is listed for six-sided machining; drawing and inspection report required.
    Surface Roughness Ra ≤0.4–0.8 μm is listed; optional mirror finish requires separate confirmation.
    Sample Weight 0.1 kg, one piece, according to the visible label.
    Dimensions The supplied brief lists custom dimensions; final size and tolerances should be confirmed by drawing.
    Packaging Clear bag is visible in the photos. Vacuum-sealed packaging requires confirmation.
    Standards The supplied brief lists ASTM, EN, JIS, and GB/T standards. Confirm which standard applies to the exact grade and product form.
  • Custom T-Shaped Copper GIS Contact Socket Assembly

    Custom T-Shaped Copper GIS Contact Socket Assembly

    Item Specification
    Product T-Shaped Copper Contact Socket Assembly
    Material Copper grade, standard and condition to be specified and confirmed for the order
    Assembly Geometry Hollow cylindrical sleeve connected to a perpendicular rectangular stem
    Sleeve Bore Internal bore with visible annular grooves or stepped features; profile per drawing
    Stem Rectangular section; dimensions and protruding length per drawing
    Stem End Two threaded holes visible; thread type, size and pitch per drawing
    Joining Method To be confirmed from design and order requirements
    Dimensions According to approved 2D or 3D drawing
    Tolerances Critical dimensions and general tolerances to be agreed from the drawing
    Surface Condition As specified; deburring and finish requirements to be confirmed
    Plating Optional only by agreement; coating type, coverage and thickness to be specified
    Electrical Rating Requires validation for the full assembly and operating conditions
    Inspection Scope and sampling plan to be agreed for the order
    Documentation Material and dimensional records subject to order requirements
  • Custom 90-Degree L-Bent Copper Busbar Transition Bracket

    Custom 90-Degree L-Bent Copper Busbar Transition Bracket

    Item Specification
    Product L-Bent Copper Busbar Transition Bracket / Copper Terminal
    Material Copper grade and standard to be specified and confirmed for the order; C11000 or C10200 may be considered where suitable
    Construction Formed copper component with right-angle transition, subject to drawing confirmation
    End A Central bore with surrounding mounting-hole pattern, as shown
    End B Rounded connection end with four-hole pattern, as shown
    Dimensions According to approved 2D or 3D drawing
    Bend Angle and Radius Drawing-defined
    Hole Sizes and Positions Drawing-defined; mating requirements to be provided
    Tolerances Critical and general tolerances to be agreed from the drawing
    Surface Condition As specified; deburring and finish requirements to be confirmed
    Plating Optional only by agreement; coating type, coverage and thickness to be specified
    Electrical Rating To be validated for the complete equipment assembly
    Inspection Scope and sampling plan to be agreed for the order
    Documentation Material and dimensional records subject to order requirements
  • Custom Monoblock 4-Finger Pure Copper Contact with U-Bent 4-Hole Flange

    Custom Monoblock 4-Finger Pure Copper Contact with U-Bent 4-Hole Flange

    Item Specification
    Product Custom Four-Finger Copper Contact / Slotted Contact Element
    Construction One-piece formed component, subject to drawing confirmation
    Material Copper grade and applicable standard specified by the buyer and confirmed for the order; C11000 or C10200 may be considered where suitable
    Contact Geometry Three longitudinal slots forming four fingers
    Formed Features Offset bend and U-shaped return bend, according to drawing
    Mounting End Four-hole flange; hole size, spacing and countersink or chamfer details per drawing
    Slot-End Details Edge relief or other slot-end geometry as specified
    Dimensions To approved 2D/3D drawing
    Material Condition Temper or condition to be specified; confirm its suitability for the required forming and contact behavior
    Tolerances Critical dimensions and general tolerances to be agreed from the drawing
    Surface Condition As manufactured; deburring and finish requirements to be specified
    Plating Optional only if specified; coating type, coverage and thickness to be agreed
    Contact Force / Current Rating Not established by material or geometry alone; validate for the complete assembly and operating conditions
    Inspection Inspection scope and sampling plan agreed for the order
    Documentation Material and dimensional records available as agreed before order placement
  • Multi-Bent Stepped Pure Copper Busbar Connector

    Multi-Bent Stepped Pure Copper Busbar Connector

    Parameter Specification
    Product type Custom copper busbar connector / transition terminal
    Working product name Multi-bent stepped copper connector
    Material Pure copper per supplied brief; exact grade and standard to be confirmed
    Visible profile Multi-bent spatial offset with stepped sections
    End feature Projecting flat tongue; mating details to drawing
    Hole pattern Five-hole arrangement described in the brief; verify against drawing
    Overall dimensions Drawing-defined
    Bend angles and locations Drawing-defined
    Critical tolerances Drawing-defined and subject to feasibility review
    Surface finish As specified for the assembly
    Plating options To be reviewed against the mating interface and order specification
    Manufacturing route Selected after review of the drawing, quantity and tolerances
    Inspection documents Agreed according to order requirements