Custom T-Section U-Slotted Copper Busbar Connector with Dual Lugs
Video
Short Description
This custom T-section copper busbar connector has a central U-shaped slot that forms two mounting lugs, with holes visible in the lugs and adjoining flange. Material grade, hole geometry, dimensions, tolerances and surface treatment are specified by the approved drawing and order requirements.
Product Overview
The T-section U-slotted copper busbar connector is a custom electrical component with a central notch dividing one section into two lugs. Photos show mounting holes in the lugs and additional features on the adjoining flange. The exact orientation and function of each hole should be confirmed from the customer’s drawing.
The supplied product brief identifies pure copper as the intended material. The grade and standard should be confirmed for each order. Cymber Metal’s Pure Copper range is a starting point for reviewing material options.
The part may be considered for applications that need a compact, branched or offset connection geometry. Its intended role, current path and compatibility with equipment should be verified against the assembly drawing and operating requirements. Production route and whether a single-piece construction is suitable should also be confirmed during engineering review.
Features
| Feature | Description | Specification Note |
|---|---|---|
| T-section geometry | The component has a crosswise section joined to a projecting section, as shown in the photos. | Section dimensions and orientation to drawing. |
| Central U-slot | A deep slot divides one section into two lugs. | Slot width, depth, bottom radius and position to drawing. |
| Dual lugs | The split end provides two separate mounting or connection areas. | Hole pattern and lug symmetry/asymmetry to drawing. |
| Multiple hole features | Holes are visible in the lugs and adjoining section. | Confirm through-hole, countersink, counterbore or other details. |
| Copper construction | Pure copper is identified as the intended material in the supplied brief. | Grade, standard and documentation to be agreed. |
| Custom manufacture | Geometry can be reviewed for machining or another suitable production route. | Final process depends on drawing and order quantity. |
Manufacturing Process
| Step | Process | Control Focus |
|---|---|---|
| 1 | Drawing and application review | Confirm interfaces, datums, hole details, slot dimensions and critical contact areas. |
| 2 | Material selection | Agree copper grade, standard, condition and required material documentation. |
| 3 | Blank and route planning | Select a suitable blank and production route based on geometry, quantity and tolerance needs. |
| 4 | Forming or CNC machining | Produce the T-section, U-slot, holes and stepped features according to the approved drawing. |
| 5 | Deburring and surface preparation | Remove burrs and prepare specified contact and mounting surfaces. |
| 6 | Optional surface treatment | Apply an agreed plating or finish if required and feasible for the part. |
| 7 | Final inspection | Check drawing-defined dimensions, hole features, surface condition and order records. |
Cymber Metal’s fine machining and CNC machined parts capability can be reviewed during process planning. A particular cold-drawn profile, CNC setup or one-piece production method should not be assumed until the drawing is assessed.
Manufacturing & Quality Control
| Stage | Quality-Control Focus | Records or Requirements |
|---|---|---|
| Material review | Confirm the grade and standard specified for the order. | Material documents as agreed. |
| First-piece review | Compare the component with the approved drawing and assembly interfaces. | First-piece inspection if requested and agreed. |
| Dimensional inspection | Check the T-section, U-slot, hole sizes and positions, and overall dimensions. | Inspection points and tolerances defined by drawing. |
| Contact-surface review | Inspect the specified mating areas for surface condition and visible defects. | Surface requirements provided by the customer. |
| Plating review | If plating is required, confirm coating type, coverage and any specified thickness. | Plating specification agreed before production. |
| Final inspection | Verify applicable order requirements and packing condition. | Final inspection records according to the order. |
| Quality information | See Cymber Metal’s Quality Assurance page. | Product-specific inspection scope and documents must be agreed for the order. |
Typical Applications
| Potential Application | Possible Component Role | Confirmation Required |
|---|---|---|
| Circuit breakers and switchgear | Branch or transition terminal within an electrical assembly | Confirm equipment model, interface, electrical duty and mounting arrangement. |
| Switchgear busbar assemblies | Compact connection or splitter node | Verify current path, clearances, contact pressure and thermal requirements. |
| EV battery distribution units | Potential connector or busbar terminal in a BDU/PDU assembly | Confirm vehicle-system requirements and applicable validation. |
| Energy-storage converters | Connection node within a power-conversion assembly | Confirm electrical, mechanical and environmental requirements. |
| Industrial power supplies | Custom conductive terminal or interconnection component | Confirm design compatibility and operating conditions. |
These are application areas proposed in the supplied product brief, not a declaration of voltage rating, certification or suitability for a specific system.
Frequently Asked Questions
It is a custom conductive component with a T-like section and a central U-shaped slot that separates part of the connector into two lugs. This geometry may be used where a design needs multiple mounting or connection points, but the exact electrical role depends on the assembly drawing.
The supplied product brief identifies pure copper as the intended material. It does not confirm a specific grade or standard. Include the required copper grade, material condition and documentation in the RFQ so they can be reviewed before production.
The slot visibly divides one section into two lugs. Its purpose could relate to assembly clearance, separate connections or another design requirement, but that cannot be established from photographs alone. The drawing and equipment context should define its function and critical dimensions.
The photos show hole features that appear different in size or finish. The approved drawing should identify whether they are through-holes, countersunk holes, counterbores or another feature, along with diameters, positions and tolerances.
A single-piece construction may be evaluated, but it should not be assumed from the photos. Feasibility depends on the specified geometry, material form, machining access, quantity and performance requirements.
CNC machining can be reviewed for the slot, holes and stepped geometry. The process, setup and achievable tolerances depend on the drawing and production plan. Share a 2D drawing or 3D model for a feasibility review.
A plating option can be reviewed if it is required by the mating interface or equipment specification. The RFQ should state the plating type, coverage, thickness if specified, and any masking requirements. The final process and inspection criteria need to be confirmed.
Provide the material grade and standard, 2D/3D drawing, critical tolerances, hole and slot details, contact surfaces, finish or plating, quantity, inspection documents, destination and required schedule. Include the equipment type or application so the interfaces can be reviewed.
RFQ Information
| Information Needed | Details to Provide |
|---|---|
| Material | Copper grade, standard and condition |
| Drawing | 2D drawing and, if available, 3D model |
| Dimensions | Overall size, section dimensions, slot and hole details |
| Critical features | Datums, contact areas, fit and tolerances |
| Surface | Copper finish or specified plating/coating |
| Quantity | Prototype, initial order and expected recurring quantity |
| Quality documents | Material records, dimensional inspection or other requirements |
| Application | Equipment type, mating parts and operating conditions |
| Delivery | Destination, packing requirements and target schedule |
For drawing review and quotation, contact Cymber Metal.










