Custom Multi-Grooved Copper Moving Contact Rod for Switchgear

Short Description:

Parameter Specification / Customization Basis
Product Type Copper contact rod / bushing central conductor stem
Configuration One-piece rod body as specified by the approved drawing
Material Pure copper; exact grade and temper to be specified
Main Geometry Long cylindrical shank with enlarged stepped ends
End Features Multiple circumferential grooves and shoulders; dimensions and intended function per drawing
End Interfaces End-face geometry, bores and mating features per assembly requirements
Internal Threads Optional or as specified; standard, size, pitch, class and engagement depth required
Arcing Tip Optional; material, geometry and joining method to be specified if required
Protective Caps End protection can be specified for handling and shipment
Surface Finish Bare copper or specified finish; plated areas and coating requirements by agreement
Critical Dimensions Overall length, shank diameter, end diameters, groove dimensions and interface locations
Alignment Requirements Straightness, concentricity and runout requirements defined by drawing
Electrical Requirements Conductivity and current-carrying requirements specified for the selected grade and assembly

Product Detail

Product Tags

Video

Short Description

Custom one-piece copper conductor rod with a long cylindrical shank and enlarged ends featuring multiple circumferential grooves. It can be configured as a switchgear moving contact rod or a central conductor stem for a wall bushing assembly. Material grade, end interfaces, groove geometry, optional tip construction and protective caps are specified against the approved drawing.

Product Overview

This copper contact rod has a long, reduced-diameter central shank with larger stepped ends and multiple circumferential grooves. The design can be used as a moving contact rod in a circuit-breaker assembly or as a central conductor in a wall bushing, subject to the equipment manufacturer’s interface and performance requirements.

The photos show protective end caps, so the underlying end interfaces are not fully visible. Internal threads, a brazed arcing tip, sealing features or guide-element grooves should be included only when defined by the drawing. Copper grade and temper should likewise be specified for the required electrical, mechanical and forming properties. Cymber Metal’s Pure Copper range is a starting point for discussing material options; final selection depends on the assembly specification.

Key Features

Feature Practical Value
Long Cylindrical Shank Provides the main conductor section between the end interfaces.
Thickened Ends Allow stepped interfaces to be incorporated at both ends of the rod.
Multiple Circumferential Grooves Accommodate the interface features defined by the equipment drawing; groove function is design-specific.
One-Piece Rod Configuration Can be specified where the design calls for a continuous rod body without a body joint.
Optional End Interfaces Bores, internal threads, tips or other mating features can be defined for the assembly.
Protective End Caps Help protect exposed ends during handling and shipment when specified.
Drawing-Based Machining Supports control of end geometry, groove position and alignment to the customer’s assembly datums.

Manufacturing Process

The production route should be selected through drawing review. Turning, end forming and any joining operations depend on the specified geometry and material.

Stage Process Scope
1. Drawing and Interface Review Identify critical dimensions, groove functions, end interfaces and assembly datums.
2. Material Selection Confirm copper grade, temper and required material documentation.
3. Stock Preparation Prepare suitable copper stock for the specified shank and end sections.
4. End Forming, If Applicable Evaluate local forming or another suitable route for the thickened ends.
5. CNC Turning Machine the shank, stepped ends and circumferential grooves.
6. Interface Machining Produce specified bores, threads, end faces or tip seats.
7. Optional Tip Joining Apply the agreed joining method only if a separate arcing tip is included in the design.
8. Finishing and Protection Deburr, clean, apply any specified finish and fit protective caps as required.
9. Final Inspection Inspect the agreed dimensions, interfaces, surface condition and documentation.

Custom turning and interface work can be reviewed through Cymber Metal’s Fine Machining service. If plating is required, specify the coating type, thickness and plated areas; the Busbar Plating Shop can be consulted about suitable options.

Manufacturing & Quality Control

Control Area Inspection / Verification Scope
Material Verify the specified copper grade and temper against the agreed purchasing documents.
Overall Dimensions Inspect length, shank diameter, end diameters and stepped features.
Groove Geometry Check groove count, position, width, depth and bottom diameter against the drawing.
Alignment Inspect straightness, concentricity or runout where these are designated as critical characteristics.
End Interfaces Verify specified bores, internal threads, seating faces and mating geometry.
Surface Condition Check for burrs, handling damage and unacceptable machining marks.
Optional Brazed Tip If specified, agree the joining criteria and appropriate inspection method before production.
Optional Plating Verify coating coverage and dimensions according to the agreed finish specification.
Protective Caps Confirm cap fit and coverage where they are part of the delivery requirement.
Records Supply material or inspection records according to the purchase specification.

Inspection methods, sampling frequency and acceptance criteria should be agreed before production. See Cymber Metal’s Quality Assurance page for its quality-control approach.

Typical Applications

These are potential applications based on the described product form. Final suitability must be confirmed against the equipment design and validated operating conditions.

Application Potential Role Design Considerations
Circuit Breakers Moving contact conductor rod or contact-stem component End interfaces, contact geometry, operating motion and mechanical loading
Gas-Insulated Switchgear Internal conductive rod or contact connection Equipment-specific clearances, interfaces and any separately validated sealing requirements
Disconnector and Earthing-Switch Assemblies Conductor rod or stepped contact component Alignment, assembly fit and operating forces
Wall Bushings Central conductor stem Bushing interface dimensions, electrical requirements and insulation-system design
Cable Termination Boxes Internal conductor connection Mating interfaces, clearance and installation constraints
Custom Power Equipment Drawing-specific copper conductor rod Current duty, temperature rise, environment and maintenance requirements

Frequently Asked Questions

What is a multi-grooved copper moving contact rod?

It is a copper conductor rod with a long central shank and stepped, grooved end sections. Depending on the design, it may be used as a moving contact component in switchgear or as a conductor stem in a bushing assembly. The exact function of each groove and end feature must be defined by the equipment drawing.

What are the circumferential grooves used for?

Grooves can accommodate seals, guide elements, contact components or other assembly features, but appearance alone does not establish their purpose. The drawing should identify the intended function and specify groove dimensions, tolerances, surface requirements and any mating parts.

Are both ends internally threaded?

The photos show protective caps, so the end interfaces cannot be confirmed visually. If internal threads are required, the drawing should specify the thread standard, nominal size, pitch, tolerance class and engagement depth for each end.

Does the product include a brazed CuW arcing tip?

The supplied photos do not establish whether a separate CuW tip is present. If an arcing tip is required, specify its material, dimensions, joining method and acceptance requirements. The assembly’s electrical and interruption performance needs to be assessed by the equipment manufacturer.

Which copper grade should be used?

The appropriate grade depends on conductivity, mechanical loading, forming needs and the equipment specification. State the material standard and temper on the drawing or purchase order. Similar-sounding grade names from different standards should not be assumed to be interchangeable.

Can the end diameter and groove pattern be customized?

Yes, the geometry can be reviewed against a customer drawing. Provide the overall length, shank and end diameters, groove count and dimensions, datums, tolerances and details of the components that mate with each end.

Can the rod be plated?

A specified surface treatment can be reviewed. State the coating type, thickness, coverage and any areas that must remain unplated. The design should account for coating buildup at mating surfaces and, where relevant, on threads or sliding interfaces.

What is needed for a quotation?

Provide a dimensioned drawing, copper grade and temper, quantity, critical tolerances, groove function, end-interface details, surface finish and inspection-document requirements. Application information such as current duty, operating motion and temperature helps clarify the design requirements.

RFQ Information

Required Information Details to Provide
Drawing Dimensioned PDF and STEP or another suitable 3D format
Material Copper grade, standard, temper and required documentation
Quantity Prototype quantity, order quantity and expected annual demand
Main Dimensions Overall length, shank diameter and end diameters
Groove Details Groove count, location, dimensions and intended function
End Interfaces Bores, threads, seats, contact tips and mating-part details
Critical Tolerances Straightness, runout, concentricity and interface requirements
Surface Finish Bare copper or specified coating, coverage and masking
Inspection Required characteristics, inspection records and any additional testing
Application Equipment type, operating motion, current duty and service conditions
Delivery Destination, packaging requirements and target schedule

Send the drawing and requirements through Contact Us for a material and manufacturing review.


  • Previous:
  • Next:

  • Write your message here and send it to us