Custom Laminated Copper Foil Flexible Busbar
Video
Short Description
This custom laminated copper foil flexible busbar is designed to connect fixed electrical conductors where a flexible link is preferred over a rigid bar. Its layered copper section and terminal areas can be configured to the drawing, including overall dimensions, connection geometry and required flexibility.
Foil thickness, layer count, terminal finish, plating, insulation and inspection requirements should be confirmed against the drawing and purchase specification. For material options, see Cymber Metal’s Pure Copper range.
Product Overview
A laminated copper foil flexible busbar, also called a copper foil shunt or flexible copper connector, uses a layered foil section between connection points. The design can accommodate specified installation geometry and movement, but its current rating and suitability depend on the complete assembly and operating conditions.
The supplied product brief lists a reference design range of 0.03–0.30 mm foil thickness, 5–500 layers and overall dimensions from 1–50 mm thick, 10–300 mm wide and 50–2000 mm long. Treat these as preliminary ranges until manufacturing feasibility is confirmed for the specific drawing. Copper grade, joining method, terminal finish and any electrical acceptance criteria must be agreed for each order.
Key Features
| Feature | Buyer Consideration |
|---|---|
| Layered flexible section | Can be configured to the required connection path and installation space |
| Drawing-based terminal areas | Terminal width, thickness, holes and contact faces can be specified |
| Configurable foil stack | Foil thickness and layer count are selected according to the design requirements |
| Optional formed section | Flat, S/Z, U/Ω or other geometry may be reviewed against the drawing |
| Optional surface treatment | Plating or insulation should be specified and confirmed for the actual product |
| Order-specific acceptance criteria | Electrical, dimensional and joining checks should be agreed before production |
Manufacturing Process
| Stage | Process Description |
|---|---|
| Drawing Review | Review conductor layout, connection dimensions, flexibility, installation space and critical tolerances. |
| Material Confirmation | Confirm copper grade, foil thickness and material documentation against the purchase specification. |
| Foil Stack Preparation | Prepare the number and width of foil layers required by the approved design. |
| Terminal Joining or Consolidation | Use the joining route specified for the product. The supplied technical brief mentions solid-state diffusion bonding; confirm this process for the specific product before publishing it as a claim. |
| Forming | Form the flexible section to the agreed profile and dimensions. |
| Terminal Machining | Produce holes or other terminal features to drawing. Relevant fine machining support can be reviewed for drawing-specific features. |
| Surface Treatment | Apply plating, insulation or protective covering only when included in the confirmed specification. |
| Final Inspection and Packing | Check agreed product characteristics and protect the parts for storage and transport. |
Manufacturing & Quality Control
| Control Stage | Quality Check |
|---|---|
| Order and Drawing Review | Confirm grade, dimensions, foil configuration, terminal geometry, tolerance and application conditions. |
| Incoming Material | Verify material identification and documentation against the purchase specification. |
| Foil Stack and Joining | Follow the approved process route; apply bond or interface checks only as defined in the inspection plan. |
| Dimensions | Check overall length, width, thickness, terminal features and formed-section geometry to the drawing. |
| Surface Condition | Review visible damage, burrs, contamination and any specified coating or insulation. |
| Electrical or Bond Testing | Perform only the agreed tests and acceptance criteria; do not infer current rating from product dimensions alone. |
| Documentation | Provide material and inspection records included in the order requirements. |
| Packing | Protect flexible sections and contact faces from handling damage during storage and shipment. |
For inspection methods and available documentation, see Quality Assurance. Product-specific tests and acceptance criteria should be confirmed before order placement.
Typical Applications
| Application | Potential Use |
|---|---|
| Switchgear and distribution cabinets | Flexible connections between busbars or electrical components |
| Transformer connections | Flexible links at specified conductor interfaces |
| Circuit breakers | Flexible conductor sections within a drawing-defined assembly |
| Renewable-energy converters and storage equipment | Custom links in power-conversion or distribution assemblies |
| Industrial power equipment | Flexible connections where the installation geometry calls for a formed conductor |
| Custom electrical assemblies | Drawing-specific copper links for equipment manufacturers and integrators |
Final selection depends on current, temperature, duty cycle, connection design, contact pressure, cooling and installation conditions. The complete assembly should be reviewed against the applicable customer specification.
Frequently Asked Questions
It is an electrical connector made from multiple copper foil layers, with a flexible section between terminal areas. It is used where the connection geometry or movement requirement calls for a flexible conductor rather than a fully rigid bar. The final layer stack and terminal design should follow the equipment drawing.
No. A foil shunt uses stacked flat copper foils, while a braided shunt uses woven or braided copper strands. Their geometry and flexibility differ, so selection should consider the installation space, movement, electrical requirements and terminal design.
The supplied brief lists options including C10100, C10200, C11000, Cu-ETP, Cu-OF, T2, TU1 and TU2. These designations should not be treated as interchangeable without checking the required standard and material certificate. Please specify the grade and standard needed for the application.
The supplied brief lists selective tin or silver plating as possible finishes. The actual finish, coated area, thickness and acceptance criteria must be confirmed for the product and order. The photos alone do not establish which plating, if any, is present.
The supplied brief lists flat, S/Z, U/Ω and twisted configurations. The selected geometry should be shown on the drawing, including bend dimensions and installation orientation, so that manufacturing feasibility and fit can be reviewed.
Foil thickness and layer count depend on the required dimensions, flexibility, electrical loading and assembly conditions. Share the current, duty cycle, ambient conditions, connection layout and temperature limits so the design can be reviewed. A current rating should not be assigned from foil count alone.
Material certificates and inspection records can be specified in the RFQ. Dimensional, electrical, coating or bond-related checks should be listed with the required methods and acceptance criteria so that the order documentation matches the application.
Please provide a 2D or 3D drawing, copper grade and standard, foil thickness or target stack, overall dimensions, terminal hole pattern, formed-section geometry, quantity, electrical and temperature requirements, finish, inspection documents, destination and requested delivery schedule.
Request a Quote
| Information | Details to Provide |
|---|---|
| Drawing | 2D/3D drawing with terminal geometry, bends and critical tolerances |
| Material | Copper grade, standard and required material documentation |
| Foil Stack | Foil thickness, layer count or required total section |
| Electrical Conditions | Current, duty cycle, temperature limits and assembly context |
| Terminals | Width, thickness, hole pattern, contact faces and connection method |
| Flexible Section | Flat, S/Z, U/Ω, twist or other specified geometry |
| Finish | Bare copper, plating, insulation or protective covering |
| Quantity | Prototype/sample quantity, order quantity and expected repeat demand |
| Inspection | Required dimensional, electrical, bond or coating checks and documents |
| Delivery | Destination, packing requirements and requested schedule |
Send the drawing and requirements through Contact Cymber Metal for a feasibility review and quotation.















