Custom Monoblock 4-Finger Pure Copper Contact with U-Bent 4-Hole Flange

Short Description:

Item Specification
Product Custom Four-Finger Copper Contact / Slotted Contact Element
Construction One-piece formed component, subject to drawing confirmation
Material Copper grade and applicable standard specified by the buyer and confirmed for the order; C11000 or C10200 may be considered where suitable
Contact Geometry Three longitudinal slots forming four fingers
Formed Features Offset bend and U-shaped return bend, according to drawing
Mounting End Four-hole flange; hole size, spacing and countersink or chamfer details per drawing
Slot-End Details Edge relief or other slot-end geometry as specified
Dimensions To approved 2D/3D drawing
Material Condition Temper or condition to be specified; confirm its suitability for the required forming and contact behavior
Tolerances Critical dimensions and general tolerances to be agreed from the drawing
Surface Condition As manufactured; deburring and finish requirements to be specified
Plating Optional only if specified; coating type, coverage and thickness to be agreed
Contact Force / Current Rating Not established by material or geometry alone; validate for the complete assembly and operating conditions
Inspection Inspection scope and sampling plan agreed for the order
Documentation Material and dimensional records available as agreed before order placement

Product Detail

Product Tags

Video

Short Description

Cymber Metal supplies custom one-piece copper contact elements with three longitudinal slots forming four fingers, an offset bend and a U-bent four-hole mounting flange. Material grade, temper, dimensions and hole pattern are specified according to the approved drawing.

The slotted geometry is intended for a multi-finger contact arrangement. Contact force, current rating and temperature rise depend on the complete assembly, material condition and operating requirements, and should be validated for the application.

Product Overview

This custom copper contact combines a four-finger slotted contact end with a formed offset and return-bent mounting end. The one-piece layout brings the contact fingers and mounting flange together in a single component; slot dimensions, edge reliefs, bend radii and hole locations can be reviewed against the customer drawing.

Material options such as C11000 or C10200 can be considered when specified, subject to grade, standard and supply confirmation. See our Pure Copper page for related copper forms. Custom machining and drawing review can also be discussed through our Fine Machining capability.

Key Features

Feature Description
Four-finger contact end Three longitudinal slots create four distinct fingers within the one-piece component.
U-bent mounting end Return-bent flange geometry provides a compact mounting arrangement, subject to the equipment layout.
Four-hole flange Hole pattern and edge details can be made to the approved drawing.
Offset transition The intermediate bend connects the finger section to the mounting end; angle and radius are drawing-defined.
One-piece layout Contact fingers and mounting flange are part of the same component rather than separate assembled pieces.
Custom edge details Slot ends and any relief features can be specified; their function should not be assumed without the drawing.

Manufacturing Process

Stage Scope
Drawing Review Confirm grade, material condition, developed dimensions, slot layout, bend geometry and mounting-hole pattern.
Material Preparation Select and prepare copper stock to the agreed material specification and component dimensions.
Slotting and Cutting Produce the longitudinal slots and outer profile using a process selected for the material thickness and drawing requirements.
Forming Form the offset and U-shaped return bend using a process suited to the specified material condition and bend radius.
Hole Machining Produce the four mounting holes and specified chamfers or countersinks.
Finishing Deburr and clean the component; apply plating only if included in the order specification.
Final Inspection Check agreed critical dimensions, slot edges, formed geometry and surface condition against the drawing.

Manufacturing & Quality Control

Control Stage Review or Inspection
Drawing and Feasibility Review Review material, dimensions, mating interface, bend radii and critical tolerances before production.
Material Verification Confirm the supplied material grade and supporting records according to the purchase specification.
Dimensional Inspection Check selected critical features such as slot width, finger geometry, bend dimensions and hole locations against the agreed inspection plan.
Formed-Feature Inspection Review the return bend, offset and component condition against drawing requirements.
Surface and Edge Inspection Check for burrs and visible surface issues; any special acceptance criteria should be specified.
Plating Inspection When plating is ordered, confirm the required coating scope and inspection criteria separately.
Documentation Material certificates, dimensional reports and additional test records are subject to the agreed order requirements.

For available inspection and documentation options, see our Quality Assurance page. Product-specific tests and acceptance criteria should be agreed before order placement.

Typical Applications

Potential Application Possible Use Design Checks
Withdrawable switchgear Multi-finger contact element in a plug-in connection Mating conductor geometry, alignment, contact force and equipment rating
Motor control centers (MCC) Custom contact component for a removable or plug-in assembly Installation envelope, duty cycle, temperature and assembly validation
Disconnectors or switching equipment Drawing-specific sliding or mating contact component OEM interface, movement, contact pressure and electrical requirements
Electrical test fixtures Custom copper contact for a specified test connection Test current, duration, thermal limits and fixture design

These are potential uses, not verified ratings or approvals. Final suitability should be confirmed by the equipment designer or OEM using the complete assembly and operating conditions.

FAQ

What is a four-finger copper contact?

It is a copper contact component whose slotted end is divided into four fingers. This design also includes an offset and a U-bent mounting flange with four holes.

Can the slot pattern and dimensions be customized?

Yes. Slot length and width, finger dimensions, bend geometry, hole spacing and other features can be reviewed against your drawing.

Which copper grade should I specify?

Specify the required grade and material standard if known. C11000 or C10200 may be considered for suitable applications, but the final choice depends on the electrical, forming and operating requirements.

Does pure copper provide the required spring pressure?

Not by itself. Electrical conductivity does not establish elastic recovery or contact force. Those depend on the material condition, geometry, deflection, temperature and any separate spring arrangement.

Can this component be used in switchgear or an MCC?

It may be considered for a drawing-specific switchgear or MCC contact assembly. The mating interface, installation conditions and equipment rating must be checked by the equipment designer.

Can the contact be plated?

Plating can be discussed if required. Specify the coating material, areas to be coated, thickness and applicable acceptance criteria.

What inspection records can be supplied?

Material and dimensional records can be discussed according to the purchase specification. Any additional conductivity, coating or assembly test should be agreed in advance.

What information is needed for a quotation?

Please provide the drawing, material grade and condition, quantity, critical tolerances, finish or plating requirements, application conditions and destination.

Request a Quote

Please Provide Details
Drawing 2D or 3D file with dimensions, slot geometry, bends and hole pattern
Material Grade, standard and required material condition
Quantity Prototype, sample and production quantities, if applicable
Critical Requirements Tolerances, mating interface, contact-force or performance criteria
Surface Treatment Bare copper or specified plating and finish
Inspection and Documents Required inspection scope, material records and other documents
Delivery Destination country and target delivery schedule

Send your drawing and requirements through Contact Us for a material and manufacturing review.


  • Previous:
  • Next:

  • Write your message here and send it to us