Pure Copper Square and Rectangular Bar Stock
Video
Short Description
Pure copper square and rectangular bars are solid copper stock supplied in square or flat rectangular sections. They can be specified by copper grade, section dimensions, temper, length, straightness and surface condition for machining or electrical-component fabrication.
The supplied product brief lists C11000, C10200 and C10100 among potential grades, with multiple section sizes and cut-to-length options. Exact grade, standard, size and availability should be confirmed for each order. For broader material options, see Cymber Metal’s Pure Copper range.
Product Overview
Pure copper square and rectangular bar stock provides a solid starting form for machined components and drawing-specific electrical parts. The choice between C11000, C10200 or another specified grade depends on the required material standard, application and documented properties.
The supplied product brief lists flat-bar sections from 15–100 mm thick and 20–300 mm wide, solid square bars from 15 × 15 mm to 120 × 120 mm, and standard lengths of 2000–6000 mm. It also lists example sections such as 30 × 60 mm, 30 × 65 mm, 35 × 35 mm, 40 × 40 mm and 40 × 70 mm. These are reference sizes, not a confirmation of current stock; please request an availability check.
Key Features
| Feature | Buyer Consideration |
|---|---|
| Solid square and rectangular sections | Select a section that leaves suitable machining allowance or matches the electrical-component drawing |
| Multiple copper-grade options | Specify the required grade and standard rather than relying on assumed equivalents |
| Long-bar and cut-length supply | Confirm required length, saw-cut tolerance and end condition |
| Drawing-based machining review | Share the part drawing for feasibility, tolerance and material review |
| Inspection defined by order | Agree any conductivity, hardness, straightness or ultrasonic inspection requirements before production |
Manufacturing Process
| Stage | Process Description |
|---|---|
| Drawing and Material Review | Confirm grade, standard, section, temper, length, tolerances and application. |
| Stock or Production Route | Select suitable copper bar stock or the approved production route for the requested section. The supplied brief describes extrusion and cold drawing; confirm the actual route for the ordered material. |
| Section Sizing | Produce or select the specified square or rectangular section, with dimensional requirements set by the approved specification. |
| Straightening | Review straightness and twist requirements against bar length and section dimensions. |
| Cut-to-Length | Saw the bar to the requested length, subject to equipment capability and agreed tolerance. |
| Optional Machining | Review CNC machining or other drawing-based processing through Fine Machining. |
| Final Inspection and Packing | Check agreed dimensions and visible surface condition, then protect the material for handling and shipment. |
Manufacturing & Quality Control
| Control Stage | Quality Check |
|---|---|
| Order Review | Confirm material grade, standard, section dimensions, length, temper, tolerance and intended application. |
| Material Verification | Match material identification and certificate details to the purchase specification. |
| Section Dimensions | Measure width, thickness or square dimensions at the locations defined by the inspection plan. |
| Edge and Perpendicularity | Check edge profile and face relationship when required by the drawing. |
| Straightness and Twist | Inspect to the agreed limits, particularly for long bars and machining stock. |
| Surface Condition | Review visible dents, scratches, oxidation or handling marks against the agreed acceptance criteria. |
| Additional Testing | Conduct conductivity, hardness or ultrasonic tests only when specified, available and documented for the order. |
| Documentation and Packing | Provide the documents included in the order and protect bar surfaces during bundling or shipment. |
For inspection methods and available documentation, see our Quality Assurance page. Product-specific inspection methods and acceptance criteria should be agreed before order placement.
Typical Applications
| Application | Potential Use |
|---|---|
| CNC machining | Bar stock for machined copper blocks, terminals, contacts and other drawing-defined parts |
| Busbar fabrication | Copper stock for electrical busbars and conductive sections, subject to grade and design requirements |
| Switchgear and power equipment | Material for machined conductive components where the specified copper grade is suitable |
| GIS and circuit-breaker components | Parent material for customer-designed contact or conductor parts; confirm grade and final-part requirements |
| EDM electrode production | Copper stock for electrode machining when the specified grade and condition meet the process requirements |
| Industrial electrical systems | Custom-section material for power equipment and electrical assemblies |
Final suitability depends on the grade, temper, section, machining design, electrical requirements and equipment specification. The use cases above are potential applications, not a qualification for a particular system.
Frequently Asked Questions
A pure copper square bar is solid copper stock with a square cross-section. It is commonly used as machining stock or for drawing-specific electrical parts. The required copper grade, standard, temper, dimensions and inspection documents should be specified when requesting a quote.
Square bar has equal width and thickness, while rectangular bar has different dimensions on those sides. The correct section depends on the finished part or busbar design. Provide the drawing or specify both dimensions, length and tolerances to confirm the appropriate stock form.
The supplied brief lists C11000, C10200 and C10100 as potential grades. It also names Cu-ETP, Cu-OF, T2, TU1 and TU2 designations. These should not be assumed interchangeable without checking the required standard and material certificate for the order.
The supplied brief lists square sections from 15 × 15 mm to 120 × 120 mm and flat bars from 15–100 mm thick by 20–300 mm wide. It also gives examples such as 30 × 65 mm and 40 × 70 mm. Confirm the requested size and current availability before placing an order.
Cut-to-length supply can be reviewed for the required bar section and length. Please state the cut length, quantity, end condition and allowable tolerance. Cutting feasibility and tolerance depend on the dimensions, equipment and order requirements.
ASTM B187 is named in the supplied product brief, but the applicable standard depends on the selected grade and product form. State the exact standard and revision required in the RFQ so the material route and documentation can be checked before order confirmation.
Ultrasonic testing should not be assumed for every bar or order. If internal inspection is required, specify the inspection method, coverage, acceptance criteria and reporting requirements in the purchase specification. Any test scope should be confirmed for the selected material and section.
Please provide the copper grade and standard, square or rectangular section dimensions, length, temper, tolerance, quantity, application, cutting or machining requirements, inspection documents, destination and requested delivery schedule.
Request a Quote
| Information | Details to Provide |
|---|---|
| Copper Grade | C11000, C10200, C10100 or another specified grade and standard |
| Product Form | Square bar or rectangular/flat bar |
| Dimensions | Section width and thickness, length and critical tolerances |
| Condition | Required temper or material condition |
| Quantity | Number of bars, total weight and repeat-demand estimate |
| Processing | Cut-to-length, CNC machining or other drawing-based requirements |
| Application | Finished part or equipment use and relevant operating conditions |
| Inspection | Required dimensional, conductivity, hardness or ultrasonic checks |
| Documentation | Material certificate and other order-specific documents |
| Delivery | Destination, packing and requested delivery schedule |
Send the drawing or specification through Contact Cymber Metal for material and processing review.












