Multi-Bent Stepped Pure Copper Busbar Connector
Video
Short Description
This custom copper busbar connector features a multi-bent stepped profile, a projecting flat blade or tongue at one end, intermediate hole features and a two-hole mounting section. Copper grade, dimensions, bend geometry, tolerances and surface treatment are specified by the approved drawing and order requirements.
Product Overview
The multi-bent copper busbar connector is a custom conductive link designed around a stepped, three-dimensional profile. The photos show a narrow projecting blade at one end, a section with two smaller holes, a transition section with another hole, and a wider two-hole mounting end. The function of each feature should be confirmed against the equipment drawing.
The supplied product brief identifies pure copper as the intended material. The exact grade, temper and material standard should be confirmed for the order. Cymber Metal’s Pure Copper range is a starting point for reviewing material options.
The product brief proposes use in switchgear, circuit-breaker and power-distribution assemblies. These are potential applications only; compatibility depends on the mating parts, clearances, current and thermal requirements, and equipment design. The forming sequence, hole-making method and any plating should likewise be selected after drawing review.
Features
| Feature | Description | Specification Note |
|---|---|---|
| Multi-bent profile | Forms a spatial offset between the connector ends. | Bend locations, angles and radii to drawing. |
| Stepped blade end | A narrow, flat projecting section is visible at one end. | Width, thickness, engagement length and edge condition to drawing. |
| Intermediate hole features | Two smaller holes appear in the middle section. | Confirm whether they are for mounting, sensing or another function. |
| Transition section | An offset section connects the blade end to the mounting end. | Hole and bend relationships to drawing. |
| Two-hole mounting end | The wider end includes two visible mounting holes. | Hole diameter, spacing and countersinks/chamfers to drawing. |
| Copper construction | Pure copper is identified as the intended material in the supplied brief. | Confirm grade, temper and required material documentation. |
Manufacturing Process
| Step | Process | Control Focus |
|---|---|---|
| 1 | Drawing and application review | Confirm mating interfaces, hole functions, bend geometry, datums and critical dimensions. |
| 2 | Material selection | Agree copper grade, standard, temper or condition, and material documentation. |
| 3 | Blank preparation | Select and cut suitable copper stock based on the approved part geometry and order quantity. |
| 4 | Hole and contour production | Produce the specified holes and end features using a suitable machining or fabrication sequence. |
| 5 | Controlled forming | Form the offset and stepped sections using a route selected to suit the material and geometry. |
| 6 | Deburring and surface preparation | Remove burrs and prepare specified contact and mounting surfaces. |
| 7 | Optional surface treatment | Apply an agreed finish or plating if required and confirmed as feasible. |
| 8 | Final inspection | Check drawing-defined dimensions, hole positions, formed profile and surface condition. |
Cymber Metal’s fine machining and CNC machined parts capability can be reviewed during process planning. The exact forming equipment, drilling sequence and plating route should be confirmed for the approved drawing.
Manufacturing & Quality Control
| Stage | Quality-Control Focus | Records or Requirements |
|---|---|---|
| Material review | Confirm the copper grade and standard specified for the order. | Material documents as agreed. |
| First-piece review | Compare the formed component with the approved drawing and assembly interfaces. | First-piece inspection if requested and agreed. |
| Dimensional inspection | Check overall dimensions, hole sizes and positions, and specified section features. | Inspection points and tolerances defined by drawing. |
| Formed-profile inspection | Review bend angles, offsets and end-to-end alignment. | Measurement method and acceptance limits agreed before production. |
| Surface inspection | Review specified contact areas, edges and formed surfaces. | Surface requirements provided by the customer. |
| Plating review | If plating is required, confirm type, coverage and any specified thickness. | Plating requirements agreed before production. |
| Final inspection | Verify applicable order requirements and packing condition. | Final inspection records according to the order. |
| Quality information | See Cymber Metal’s Quality Assurance page. | Product-specific inspection scope and documents must be confirmed for the order. |
Typical Applications
| Potential Application | Possible Component Role | Confirmation Required |
|---|---|---|
| Withdrawable switchgear | Transition connector between equipment terminals and busbar sections | Confirm insertion interface, clearances and mounting details. |
| Air circuit breakers | Offset connection within a breaker or switchgear assembly | Verify equipment model, electrical duty and mating surfaces. |
| Molded-case circuit breakers | Compact transition link or terminal connection | Confirm design compatibility and applicable requirements. |
| Energy-storage converters | Interconnection within a power-conversion assembly | Confirm current, thermal conditions and system layout. |
| Industrial inverters and UPS equipment | Custom internal copper connection | Verify hole pattern, insulation clearances and operating conditions. |
These are application areas proposed in the supplied brief, not a declaration of voltage rating, certification or suitability for a specific system.
Frequently Asked Questions
It is a copper electrical connector formed with multiple bends to connect points at different heights or positions. This product has a stepped profile, a projecting flat end and multiple hole features. Its exact function depends on the customer’s equipment and assembly design.
The supplied product brief identifies pure copper as the intended material, but it does not establish the exact grade, temper or standard. Include those requirements in the RFQ so the material can be reviewed before production.
The brief describes a five-hole arrangement, and the photographs show several hole features. Confirm the exact count, diameters, positions and any countersinks or chamfers from the approved drawing before releasing production.
The photos show a narrow flat projection at one end, and the brief describes it as a plug-in blade. Its engagement function and mating geometry should be confirmed with the equipment drawing or mating-part specification.
A one-piece design may be evaluated, but the photos alone do not confirm its construction method. Feasibility depends on the approved geometry, material form, forming sequence, quantity and required tolerances.
A plating option can be reviewed if required by the mating interface or equipment specification. The RFQ should state the coating type, coverage, thickness if specified, and any masking requirements. Feasibility and inspection criteria should be agreed before production.
Bend-angle, hole-position and overall-span tolerances should be specified on the drawing and reviewed before quotation. The acceptance method should also be agreed, especially where the connector must fit a specific assembly without forcing or rework.
Provide the material grade and standard, 2D/3D drawing, bend angles and radii, hole details, critical tolerances, surface finish or plating, quantity, inspection documents, destination and target schedule. Include the equipment type and mating-part details if available.
RFQ Information
| Information Needed | Details to Provide |
|---|---|
| Material | Copper grade, standard and condition |
| Drawing | 2D drawing and, if available, 3D model |
| Geometry | Developed length, section widths, thickness, bend angles and radii |
| Hole details | Hole count, diameter, position, countersink or chamfer details |
| Critical interfaces | Blade engagement dimensions, mounting faces and datums |
| Surface | Copper finish or specified plating/coating |
| Quantity | Prototype, initial order and expected recurring quantity |
| Quality documents | Material records, dimensional inspection or other requirements |
| Application | Equipment type, mating parts and operating conditions |
| Delivery | Destination, packing requirements and target schedule |
For drawing review and quotation, contact Cymber Metal.










