1060 Electrical-Grade Aluminum Busbar
Short Description
1060 electrical-grade aluminum busbar is available in specified cross-sections and lengths for electrical conductor applications. The supplied product information lists straight bars and coil forms, multiple tempers, and optional surface treatments. Confirm alloy, temper, dimensions, conductivity, applicable standard, and finish against the order requirements and batch documentation.
Product Overview
1060 aluminum busbar is a high-purity aluminum conductor used in electrical equipment where conductor weight, cross-section, and conductivity need to be considered together. The product information identifies 1060 as the primary alloy and lists straight lengths, optional coil supply, and custom dimensions.
Available temper and forming options should be selected according to the required flexibility, strength, and fabrication route. Related alloys such as 1050A, 1070, 1350, 6101, and 6063 are separate material options, not automatic substitutes for 1060. Confirm alloy, temper, dimensions, and electrical requirements before ordering.
For related aluminum material options, see Cymber Metal’s Aluminum Alloy range. Company-level inspection information is available on the Quality Assurance page.
Key Features
| Feature | Description |
|---|---|
| 1060 alloy option | Electrical-grade 1060 is identified as the primary alloy in the supplied product information. |
| Multiple cross-sections | A range of thicknesses and widths is listed; confirm available sizes and tolerances for the order. |
| Straight bars or coils | Supply form can be selected according to application and fabrication requirements. |
| Temper options | Soft, semi-hard, full-hard, and as-extruded conditions are listed; verify availability by size. |
| Surface treatment options | Plating, insulation, and coating options may be specified where required. |
| Lightweight conductor material | Aluminum has a lower density than copper; conductor sizing and system design must account for electrical and thermal requirements. |
Manufacturing Process
| Stage | Scope |
|---|---|
| Material Review | Confirm alloy, temper, standard, dimensions, and electrical requirements. |
| Melting and Preparation | High-purity aluminum feedstock and melt treatment are described in the supplied process information; confirm the actual route for the product. |
| Continuous Extrusion | Conform continuous extrusion is listed as a forming method; verify that it applies to the selected profile and order. |
| Drawing and Straightening | Precision cold drawing and multi-roll straightening are listed options for dimensional control. |
| Surface Preparation | Remove burrs and surface residues as required by the specified finish or subsequent plating. |
| Optional Finishing | Apply plating, heat-shrink tubing, or coating only when specified and technically agreed. |
| Final Inspection | Check dimensions, straightness, surface condition, and specified electrical or mechanical properties against the order requirements. |
Manufacturing & Quality Control
| Control Stage | Review or Inspection |
|---|---|
| Chemical Composition | Optical emission spectroscopy is listed for checking aluminum content; confirm batch records. |
| Electrical Conductivity | Eddy-current or bridge-resistivity testing is listed; confirm test method, coverage, and measured results. |
| Mechanical Properties | Tensile testing is listed; confirm the test requirements for the selected temper. |
| Bend Testing | 90° bend testing is described in the supplied brief; agree on the applicable method and acceptance criteria. |
| Dimensional Inspection | Check thickness, width, length, straightness, and other agreed dimensions. |
| Surface Inspection | Review burrs, surface condition, and any specified coating or plating. |
| Documentation | Material certificates, conductivity reports, and traceability records are listed in the supplied information; confirm availability for the specific order. |
For company-level quality information, see Quality Assurance. Product-specific tests, standards, and acceptance criteria should be agreed before order placement.
Typical Applications
| Potential Application | Possible Use | Requirements to Confirm |
|---|---|---|
| Switchgear and ring main units | Main or grounding conductor bars | System design, current, temperature rise, connections, and applicable standards |
| Busway systems | Conductors for sandwich or air-insulated busways | Cross-section, joint design, insulation clearances, and system rating |
| Transformers | Winding or equalizing conductors, where the selected temper is suitable | Temper, bend requirements, dimensions, and thermal conditions |
| EV and energy storage | Module connection bars | Current, joint design, temperature rise, and enclosure requirements |
| Renewable energy equipment | Conductor bars in inverters or related equipment | Electrical load, dimensions, connections, and equipment requirements |
| Electrolysis plants | High-current DC conductor systems | Current, thermal management, corrosion environment, and connection design |
These are potential application contexts from the supplied product information, not confirmed ratings or approvals. Final suitability should be validated against the equipment design and applicable requirements.
FAQ
It is an aluminum conductor bar made from alloy 1060, which the supplied product information identifies as the primary alloy. Confirm composition, temper, dimensions, and electrical properties against the material certificate and order specification.
They are different temper conditions. The supplied information describes O temper as soft and H14 as semi-hard. Select the condition based on forming, strength, and electrical requirements, and confirm availability for the required size.
No. These are different alloy designations with different composition and property requirements. Any substitution should be reviewed against the electrical, mechanical, and standard requirements of the application.
The supplied information lists straight lengths and precision sawing. Provide the required length, tolerance, quantity, and cross-section for confirmation.
The supplied brief lists a conductivity range of 61.0–62.5% IACS at 20 °C. Confirm the requirement, test method, and batch result before specifying a guaranteed value.
Tin, silver, and nickel plating, heat-shrink tubing, and epoxy coating are listed as options. Specify coverage, thickness, color or material, and acceptance requirements for review.
Several standards are referenced in the supplied product brief, but the applicable standard depends on alloy, product form, and order specification. Confirm the required standard and supporting documents for the selected product.
Provide alloy, temper, standard, cross-section, length or coil requirements, quantity, tolerances, finish, application, inspection documents, destination, and target schedule.
Request a Quote
| Please Provide | Details |
|---|---|
| Material | Alloy, temper, standard, and required conductivity |
| Dimensions | Thickness, width, length, tolerance, and edge profile |
| Supply Form | Straight lengths or coil, including any cutting requirement |
| Quantity | Sample, trial, or production quantity |
| Surface | Mill finish, dry/oiled surface, plating, heat-shrink, or coating |
| Application | Equipment type and operating conditions |
| Inspection and Documents | Required material certificate, conductivity report, and inspection scope |
| Delivery | Destination and target schedule |
Send your drawing and requirements through Contact Us for a material and manufacturing review.

















