Custom 4N High-Purity Copper Block

Short Description:

Item Specification
Product 4N High-Purity Copper Block
Product Form Rectangular copper block / blank
Purity 4N; the supplied brief lists Cu ≥99.99%–99.995%. Confirm by batch analysis.
Grade C10100, Cu-OFE (CW009A), C1011, and TU0 / 4N-Cu are listed as possible designations; confirm the exact grade by certificate.
Oxygen Content ≤2–5 ppm is listed in the supplied specification; verify with the applicable test report.
Trace Metallic Impurities ≤50–100 ppm is listed; confirm test method and batch result.
Electrical Conductivity ≥101–102% IACS is listed; confirm measurement method and result before publication.
Thermal Conductivity ≥398–401 W/(m·K) is listed; confirm test conditions and documentation.
Residual Resistivity Ratio (RRR) ≥150–400+ is listed; confirm test data and definition.
Grain Size 20–80 μm is listed; confirm metallographic results.
Flatness / Parallelism ≤0.02 mm is listed for six-sided machining; drawing and inspection report required.
Surface Roughness Ra ≤0.4–0.8 μm is listed; optional mirror finish requires separate confirmation.
Sample Weight 0.1 kg, one piece, according to the visible label.
Dimensions The supplied brief lists custom dimensions; final size and tolerances should be confirmed by drawing.
Packaging Clear bag is visible in the photos. Vacuum-sealed packaging requires confirmation.
Standards The supplied brief lists ASTM, EN, JIS, and GB/T standards. Confirm which standard applies to the exact grade and product form.

Product Detail

Product Tags

Video

Short Description

This 4N high-purity copper block is supplied as a rectangular copper blank for custom dimensions and application-specific processing. The sample shown is labeled as a 4N copper block with a net weight of 0.1 kg. Material grade, composition, oxygen level, dimensions, surface finish, and inspection requirements should be confirmed against the approved specification and batch records.

Product Overview

This product is a rectangular block of 4N copper intended for use as material stock or as a blank for further processing. The sample label identifies it as a 4N copper block, with a net weight of 0.1 kg and a quantity of one piece.

The supplied specification lists several possible grade designations, including C10100, Cu-OFE (CW009A), C1011, and TU0 / 4N-Cu. These designations should not be treated as automatically interchangeable. The exact grade, applicable standard, and purity should match the material certificate for the supplied lot.

For related material options, see Cymber Metal’s Pure Copper range. Drawing review and custom machining requirements can also be discussed through the Fine Machining service.

Key Features

Feature Description
4N copper designation The sample label identifies the product as a 4N copper block; exact composition should be supported by a material certificate.
Rectangular block form Suitable as copper stock or a blank for further processing, depending on the final drawing.
Custom weight and dimensions Can be specified according to the required blank size, weight, and machining allowance.
Application-specific requirements Purity, oxygen level, conductivity, RRR, finish, and inspection scope should be selected for the intended use.
Protective packaging The sample is shown bagged; packaging type should be agreed for each order.

Manufacturing Process

Stage Scope
Specification Review Confirm grade, purity, dimensions, tolerances, intended use, and required documentation.
Melting and Forming Vacuum induction melting and multi-directional forging are described in the supplied brief; confirm that these processes apply to this product.
Block Machining Six-sided CNC face milling is listed as an option; confirm machining scope, flatness, and finish against the drawing.
Cleaning Ultrasonic cleaning and nitrogen drying are listed in the supplied process description; confirm the actual cleaning procedure.
Packaging Vacuum-barrier packaging is listed in the supplied brief; confirm the packaging method for the order.
Final Inspection Inspect agreed dimensions, weight, surface condition, and material properties against the purchase specification.

Manufacturing & Quality Control

Control Stage Review or Inspection
Chemical Composition GDMS or ICP-MS / ICP-OES analysis is listed; confirm the available batch report and test scope.
Oxygen Analysis ONH analysis is listed for oxygen measurement; confirm the reported value and method.
Internal Soundness Ultrasonic C-scan is listed in the supplied brief; confirm whether it is performed on this product and lot.
Conductivity Eddy-current measurement is listed; confirm the test method and actual result.
Dimensional Inspection Weight and dimensions can be checked against the drawing; confirm the inspection method and report.
Surface Inspection Review finish, cleanliness, and visible defects against agreed acceptance criteria.
Traceability Heat/lot traceability and an EN 10204 3.1 certificate are listed in the supplied brief; confirm availability for the order.

For company-level quality information, see Quality Assurance. Product-specific tests, reports, and acceptance criteria should be agreed before order placement.

Typical Applications

Potential Application Possible Use Requirements to Confirm
PVD sputtering Copper blank for a planar sputtering target Purity, target dimensions, flatness, surface finish, and target-specific requirements
Cryogenic systems Thermal link or thermal sink blank RRR, conductivity at operating temperature, and test documentation
UHV equipment Copper material for vacuum-system components Outgassing, cleanliness, surface condition, and equipment requirements
Vacuum melting or evaporation High-purity copper charge stock Element limits, piece size, charge weight, and process requirements

These are potential application contexts from the supplied brief, not confirmed approvals or performance guarantees. Final suitability should be validated against the equipment design and applicable specifications.

FAQ

What is a 4N copper block?

“4N” generally refers to a nominal purity level of 99.99%. The actual composition and applicable grade should be confirmed by the material certificate for the supplied lot.

Does 4N copper mean the material is oxygen-free?

Not by itself. Purity and oxygen content are separate specifications. If oxygen-free copper is required, specify the grade and oxygen limit and request supporting test documentation.

Can this copper block be used as a PVD sputtering target blank?

It may be suitable if its purity, dimensions, flatness, surface condition, and target-specific requirements are met. Confirm the target design and required inspection records before ordering.

Is it suitable for cryogenic thermal links?

That depends on the required RRR and thermal performance at the operating temperature. These properties should be supported by the appropriate test data.

Can the block be supplied in custom dimensions?

Dimensions and machining allowance can be specified on a 2D or 3D drawing. Tolerances and finish should be agreed before production.

What grade designations are available?

The supplied brief lists C10100, Cu-OFE (CW009A), C1011, and TU0 / 4N-Cu. Confirm the exact grade and standard required; these designations should not be substituted without verification.

What inspection documents can be requested?

The supplied brief lists chemical analysis, oxygen analysis, conductivity, dimensional inspection, and traceability records. Confirm which documents are available for the specific lot and order.

What information is needed for a quotation?

Please provide the required grade and standard, dimensions, quantity, tolerances, surface finish, intended application, inspection documents, destination, and target schedule.

Request a Quote

Please Provide Details
Drawing 2D or 3D drawing with dimensions, tolerances, and machining allowance
Material Required purity, grade, standard, and oxygen limit
Quantity Sample and production quantity
Performance Conductivity, thermal conductivity, RRR, or impurity limits, if applicable
Finish and Packaging Surface condition, cleaning, and packaging requirements
Inspection and Documents Required test methods, material certificate, and dimensional report
Application and Delivery Equipment context, destination, and target schedule

Send your drawing and requirements through Contact Us for a material and manufacturing review.


  • Previous:
  • Next:

  • Write your message here and send it to us