Custom Copper Offset T-Section Stationary Blade Contact with Extended Base

Short Description:

Parameter Specification
Product Type Custom copper offset T-section stationary blade contact
Material Pure copper as identified in the product notes; confirm grade, temper and standard
Possible Copper Grades C11000, C10200 or another specified grade, subject to order confirmation
Geometry Extended base with an orthogonally positioned blade-style contact feature
Base Features Extended mounting base with a through-hole shown near one end; hole count and details to drawing
Blade Features Upright, unpunched blade shown at the opposite end; profile and lead-in geometry to drawing
Reference Dimensions Product notes list base length 40–350 mm, width 15–120 mm, thickness 4–25 mm, blade height 20–160 mm and blade thickness 3–20 mm. Reference ranges only; confirm final dimensions and feasibility by drawing
Surface Finish Product notes mention tin, hard silver or nickel plating; confirm coating type, coverage and thickness
Tolerances Blade thickness, perpendicularity, flatness and hole position to be agreed by drawing
Electrical Rating Depends on conductor dimensions, mating contact, assembly and operating conditions
Inspection Dimensional, hole-feature, surface and finish checks to the agreed inspection plan
Documentation Material and inspection documents to be confirmed at RFQ stage
Applicable Standards Specify required material and equipment standards in the RFQ; compliance is not established by the photographs

Product Detail

Product Tags

Video

Short Description

A custom copper offset T-section stationary blade contact with an extended mounting base and a perpendicular blade-style contact feature. The photographs show a mounting hole near one end of the base and a broad upright blade near the other end.

The product notes identify pure copper and describe plated-finish options. Confirm the copper grade, temper, construction route, coating, dimensions and tolerances against the approved drawing and order requirements.

Product Description

This custom copper stationary blade contact combines an extended base with a blade-style contact feature arranged at a right angle. The pictured design has a mounting hole toward one end of the base and a broad, unpunched blade at the opposite end. Blade orientation, lead-in details and mating dimensions should be specified on the drawing.

The product notes identify the material as pure copper and mention tin, silver or nickel plating options. The exact grade, temper and finish must be confirmed for each order. For material information, see our Pure Copper page. Drawing-based processing can be reviewed through Fine Machining.

Key Features

  • Offset T-section layout with an extended mounting base.
  • Perpendicular blade-style contact feature at the opposite end of the base.
  • Mounting-hole layout can be specified to suit the assembly drawing.
  • Copper grade, blade profile, dimensions and surface finish are order-specific.
  • Drawing review helps confirm mating geometry, clearances and manufacturing feasibility.

Typical Applications

Application Possible Use
Draw-Out Switchgear Stationary blade contact or conductor transition, subject to equipment design
Ring Main Units Custom contact component for a specified assembly
Disconnectors and Load-Break Switches Fixed contact feature where the equipment design calls for an orthogonal blade
Circuit Breaker Assemblies Drawing-specific connection or stationary contact component
Power Conversion Equipment Custom busbar terminal where a perpendicular contact arrangement is required

These are potential applications only. Suitability depends on the mating contact, current, temperature rise, insulation clearances, mechanical loads and applicable equipment requirements; the project engineer should confirm these conditions.

Typical Manufacturing Process

The route below is indicative. Confirm whether the part is to be machined from one blank or made using a joined construction before production.

Step Process Details to Confirm
1 Drawing and Material Review Confirm copper grade, temper, geometry and required material documents
2 Base Preparation Define base dimensions, mounting-hole layout and reference faces
3 Blade Processing Confirm blade thickness, profile, orientation and lead-in details
4 Construction Route Specify one-piece machining or the required joining method, if applicable
5 Surface Preparation and Finish Confirm deburring, cleaning, coating type, coverage and thickness
6 Final Inspection and Packing Check agreed dimensions and finish; specify protection for contact surfaces

Manufacturing & Quality Control

Control Point Review Approach
Material Confirm grade, temper and material identification against the order specification
Base Geometry Check dimensions, mounting-hole position and reference-face requirements against the drawing
Blade Geometry Verify blade profile, thickness, orientation and perpendicularity to agreed criteria
Contact Interface Review mating dimensions and surface condition against the approved drawing
Coating Confirm coating specification and agreed coverage or thickness inspection where required
Assembly Validation Electrical or mechanical tests only when specified and agreed for the completed assembly
Documentation Confirm required material records and inspection reports before order placement

For inspection methods and available documentation, see our Quality Assurance page. Product-specific testing and acceptance criteria should be agreed before ordering.

Frequently Asked Questions

What is an offset T-section stationary blade contact?

It is a stationary electrical contact component with an extended base and a blade-style feature positioned at a right angle. The exact geometry and mating interface depend on the equipment drawing.

Which copper grade is used?

The product notes identify the material as pure copper but do not confirm a certified grade for every order. Specify the required grade, temper, standard and material documents in the RFQ.

Is the contact plated?

The product notes mention tin, hard silver and nickel plating options. Confirm the coating type, coverage and thickness for the actual order; photographs cannot establish coating composition or thickness.

Is the part machined from one piece?

The photographs do not establish the manufacturing route. If one-piece construction is required, specify it on the drawing; otherwise, confirm the acceptable joining method and inspection requirements.

Can the base and blade dimensions be customized?

Yes, dimensions and hole positions should be defined by the customer drawing. The ranges listed in the product notes are reference values only, not guaranteed standard sizes.

Can this part be used in draw-out switchgear or an RMU?

It may suit a custom contact arrangement, but application suitability depends on the mating contact, electrical rating, temperature rise, clearances, mechanical loads and relevant equipment requirements. Confirm these with the project engineer.

What information is needed for a quotation?

Provide a dimensioned drawing, copper grade and temper, base and blade dimensions, hole details, construction route, finish, tolerances, quantity, application and required documents.

RFQ Information

Please Provide Details
Material Copper grade, temper and material standard
Drawing 2D or 3D drawing with critical dimensions and tolerances
Base Length, width, thickness, hole count and hole details
Blade Height, thickness, profile, orientation and mating dimensions
Construction One-piece or joined construction requirement
Surface Treatment Tin, silver, nickel or another specified finish, with coverage and thickness
Application Equipment type, mating contact and operating requirements
Quantity Sample and production quantities
Documents Material certificate, inspection report or other required records
Delivery Destination country, packing requirements and target schedule

Send your drawing and requirements through Contact Us for material and manufacturing review.


  • Previous:
  • Next:

  • Write your message here and send it to us