Custom 1060 Aluminum Textured Busbar Connector Link and T-Bracket Kit

Short Description:

Parameter Specification
Product Type Custom 1060 aluminum busbar connector link and T-bracket kit
Material 1060 electrical aluminum as identified in the supplied product notes; confirm temper, standard and material documents
Kit Contents Textured link and T-shaped brackets shown in the group photo; confirm quantity and included components
Link Features Annular raised feature with central hole, two holes along the link, and a formed end stop, as shown
Bracket Features T-shaped perpendicular support components with mounting holes; hole count and layout to drawing
Surface Texture Raised grid-like pattern visible on the link and bracket contact faces; geometry and coverage to drawing
Reference Dimensions Supplied notes list general ranges of 2.5–25 mm thickness, 15–180 mm width and 30–600 mm length. These are references only; confirm dimensions and feasibility for each component
Surface Finish Supplied notes mention tin, nickel or silver plating, or conductive passivation. Confirm aluminum pretreatment, coating compatibility, coverage and thickness
Tolerances Dimensions, hole positions, forming and fit requirements to be agreed by drawing
Electrical Rating Depends on the conductor dimensions, joint design, mating surfaces and operating conditions
Inspection Dimensional, hole-feature, surface and finish checks to the agreed inspection plan
Documentation Material and inspection documents to be confirmed at RFQ stage
Applicable Standards Specify required material and equipment standards in the RFQ; compliance is not established by the photographs

Product Detail

Product Tags

Video

Short Description

A custom 1060 aluminum busbar connector kit comprising a long textured link and T-shaped mounting brackets. The pictured link has an annular raised feature with a central hole at one end, two holes along the textured section, and a formed stop at the opposite end.

The product notes identify 1060 electrical aluminum and describe the link and T-brackets as a matched set. Confirm the kit contents, material temper, dimensions, hole pattern, surface finish and acceptance criteria against the approved drawing and order requirements.

Product Description

This custom 1060 aluminum busbar connector kit is designed around a textured link and perpendicular T-bracket components. The link shown has a raised annular feature at one end, two through-holes along its length, and a formed end feature. The fourth photo shows two T-shaped brackets alongside the link; confirm whether all three components are included in the same orderable set.

The raised grid texture is visible on the mating faces, but its electrical or mechanical effect depends on the joint design and must be validated for the intended assembly. For material information, see our Aluminum Alloy page. Drawing-based processing requirements can be reviewed through Fine Machining.

Key Features

  • Matched link-and-bracket configuration, subject to confirmation of the kit contents.
  • Long link with a raised annular end feature, two intermediate holes and a formed stop feature.
  • T-shaped brackets provide perpendicular mounting geometry.
  • Raised grid-like surface texture is visible on the pictured contact faces.
  • Material, component dimensions, hole layout and finish can be specified by drawing.

Typical Applications

Application Possible Use
Switchgear and Distribution Panels Custom aluminum conductor link or mounting transition
Ring Main Units Drawing-specific busbar connection components
Inverters and Power Conversion Equipment Link-and-bracket arrangement within an electrical assembly
Energy Storage Equipment Custom conductor connection, subject to electrical and mechanical review
Aluminum Busbar Assemblies Link or support components configured to the assembly drawing

Application suitability depends on the complete assembly, including current, temperature rise, contact design, fasteners, clearances, insulation and relevant equipment requirements. These details should be reviewed by the project engineer.

Typical Manufacturing Process

The process below is indicative. Confirm the actual production route, kit contents and finish against the drawing and order requirements.

Step Process Details to Confirm
1 Material Review Confirm 1060 grade, temper, standard and required material records
2 Link Preparation Set link dimensions, annular feature and formed end geometry
3 Surface Texture Define the grid pattern, coverage and forming or machining method
4 Bracket Processing Confirm T-section geometry, hole layout and mounting interface
5 Hole Making and Finishing Verify hole dimensions, edge condition, deburring and specified finish
6 Final Inspection and Packing Inspect agreed features and protect contact faces during packing

Manufacturing & Quality Control

Control Point Review Approach
Material Verify grade and temper against the purchase specification and available material documentation
Link Geometry Check length, width, thickness, annular feature, hole positions and formed end details
Bracket Geometry Check T-profile, mounting dimensions, hole layout and fit with the link
Texture Review pattern, location and surface condition against the drawing
Finish Confirm coating or passivation specification and agreed inspection requirements
Assembly Validation Contact resistance, temperature-rise or vibration tests only when specified and agreed for the complete joint
Documentation Confirm required material records and inspection reports before order placement

For inspection methods and available documentation, see our Quality Assurance page. Product-specific tests and acceptance criteria should be agreed before ordering.

Frequently Asked Questions

What is included in this aluminum busbar connector kit?

The product notes describe a textured aluminum link with matching T-brackets, and the fourth photo shows one link with two brackets. Confirm the orderable set contents and quantities before publication or quotation.

Is the material 1060 aluminum?

The supplied product notes identify the material as 1060 electrical aluminum. Confirm the temper, material standard and required documents for the specific order.

Does the grid texture prevent slipping or break the oxide layer?

The photographs show a raised grid-like texture, but they do not establish its effect on slip or oxide layers. Joint performance depends on the mating materials, surface condition, fastener load and assembly design and should be validated for the application.

Can the link and bracket dimensions be customized?

Dimensions and hole patterns should be specified on the drawing. The broad ranges listed in the product notes are reference values, not guaranteed dimensions for every component or kit.

What surface finishes are available?

The supplied notes mention tin, nickel or silver plating and conductive passivation. Confirm the required finish, aluminum pretreatment, coating thickness and compatibility with the mating parts before ordering.

Is this kit qualified for switchgear or inverter use?

It may be considered for a custom busbar assembly, but suitability depends on the equipment design and operating conditions. Confirm the current, temperature rise, joint resistance, clearances and applicable standards with the project engineer.

What information is needed for a quotation?

Provide the drawing, 1060 temper and standard, kit contents, link and bracket dimensions, hole details, tolerances, finish, quantity, application and required documentation.

RFQ Information

Please Provide Details
Material 1060 grade, temper and material standard
Drawing 2D or 3D drawing with critical dimensions and tolerances
Kit Contents Number of links and brackets required
Link Length, width, thickness, annular feature, holes and formed end details
Brackets T-profile dimensions, hole layout and mounting interface
Surface Grid texture requirements and specified coating or passivation
Application Equipment type and relevant electrical or mechanical requirements
Quantity Sample and production quantities
Documents Material certificate, inspection report or other required records
Delivery Destination country, packing requirements and target schedule

Send your drawing and requirements through Contact Us for material and manufacturing review.


  • Previous:
  • Next:

  • Write your message here and send it to us