90-Degree GIS Elbow Conductor | Custom Busbar Corner Connector
Video
Short Description
This 90-degree GIS elbow conductor has a textured outer body with bright machined connection ends. The supplied images show a perpendicular branch arrangement, a flanged end with multiple holes and a separate machined end with a central opening.
Material, casting or forging route, end geometry, hole pattern, tolerances and surface finish should be confirmed against the product drawing. Copper and aluminum-alloy options are listed in the supplied product brief; the correct selection depends on the project specification.
Key Features
- Right-angle conductor configuration for applications requiring a 90-degree turn.
- Textured central body with machined connection interfaces, as shown in the product photos.
- Flange-hole pattern and opposite-end opening can be specified by drawing.
- Copper or aluminum-alloy materials may be evaluated against the required design and specification.
- Casting or forging route should be confirmed based on the selected material and geometry.
- Electrical ratings, partial-discharge performance and system compliance require validation for the complete assembly.
Manufacturing Process
| Stage | Description |
|---|---|
| Drawing and material review | Confirm grade, standard, geometry, hole pattern and critical tolerances |
| Blank and process planning | Review a suitable casting, forging or other blank route for the selected material |
| End machining | Machine connection faces, collars, openings and specified holes |
| Threading and deburring | Produce specified threads and define edge condition and cleanliness requirements |
| Optional surface finishing | Review plating or other surface-treatment requirements for feasibility |
| Final inspection and packing | Inspect to the agreed plan and protect machined interfaces during packing |
Custom machining requirements can be reviewed through our Fine Machining service page.
Manufacturing & Quality Control
| Control Point | Order-Level Check |
|---|---|
| Material identity | Confirm grade, standard and supporting material documents |
| End dimensions | Inspect mating diameters, openings, faces and lengths to drawing |
| Angular relationship | Check the specified relationship between the two connection ends |
| Hole pattern | Inspect hole count, position, pitch circle and thread requirements |
| Surface condition | Review the textured body and machined ends against the approved finish requirements |
| Internal soundness | Define whether casting or forging inspection is required and agree the method and acceptance criteria |
| Functional or electrical tests | Specify test methods and limits before production; no performance is implied by the images |
| Documentation | Agree material certificates and inspection records for the order |
For inspection methods and available documentation, see our Quality Assurance page. Product-specific testing and acceptance criteria are confirmed before order placement.
Typical Applications
| Application | Potential Use |
|---|---|
| GIS and C-GIS equipment | Right-angle conductor connection where the equipment design uses this geometry |
| GIL systems | Corner or transition conductor for a specified gas-insulated line arrangement |
| Basin-insulator assemblies | Connection to a center conductor or insert, subject to interface design |
| Circuit breakers | Elbow conductor or connection housing for a matching assembly |
| Disconnectors and current transformers | Custom conductor component where specified by the equipment drawing |
Voltage level, current rating, partial-discharge limits and IEC compliance must be confirmed for the complete equipment design; they cannot be established from the component photographs.
FAQ
It is a conductor component that routes a connection through a right-angle geometry. The mating interfaces and end features depend on the GIS or GIL assembly design.
The supplied brief lists several aluminum alloys and copper materials, including A356-T6, 6061-T6, 6101-T6, C11000 and C10200. These are candidate options only; confirm the required grade, standard and material certificate for the project.
The images show a rough-textured outer surface, but appearance alone does not prove the manufacturing route. The supplied brief lists casting and forging options. Confirm the actual route for this product before publishing it as cast or forged.
The photos show multiple holes on the flange face, but the exact count, thread and pitch circle should be taken from the drawing. Include these details in the RFQ.
The supplied brief describes a central threaded opening as a possible feature. Confirm thread type, size, depth and tolerance against the part drawing.
Silver and tin plating are listed in the supplied brief as possible finishes. Confirm the base material, plated areas, coating specification and acceptance criteria for the actual order.
The supplied brief references IEC 62271-203, but the product images do not establish compliance. State the required standard and acceptance criteria in the inquiry; assembly-level compliance needs separate verification.
Provide the material and standard, drawing, overall dimensions, end interfaces, hole pattern, thread details, surface finish, quantity, inspection documents and delivery destination.
Request a Quote
| Information Needed | Details to Provide |
|---|---|
| Material | Grade, condition and applicable standard |
| Drawing | 2D/3D drawing with critical dimensions and tolerances |
| Geometry | Elbow angle, end diameters, arm length and mating interfaces |
| Hole details | Hole count, pitch circle, thread type and depth |
| Finish | Textured or machined surfaces, plating or other treatment |
| Quantity | Order quantity and sample requirements |
| Quality documents | Material certificate, inspection plan and required tests |
| Delivery | Destination, packing needs and target schedule |
Send the drawing and requirements through Contact Us for review.









