Selective-Finish Copper Bushing Stem with Two-Hole Palm
Video
Short Description
This copper bushing stem has a flat terminal palm with two through-holes and a cylindrical base with a central threaded opening. The images also show a copper-colored band around the cylindrical section; its material and function should be confirmed from the product drawing.
The supplied brief lists several copper grades and selective surface-finishing options. Confirm the exact grade, band construction, dimensions, sealing features and finish before specifying the product for an application.
Product Overview
This component connects a two-hole flat palm to a cylindrical bushing interface. The photos show a circular base with a central threaded opening and a copper-colored band around the stem. Whether that band is an unplated copper zone, a separate wrapped feature or another construction detail cannot be established from the images alone.
Material options in the brief include C10200, C10100 and C11000. See our Pure Copper range for general material information; confirm the selected grade and standard for this part.
Key Features
- Two-hole flat palm for a specified bolted connection.
- Cylindrical stem and circular base with a central threaded opening.
- Copper-colored band around the stem, subject to confirmation of its material and role.
- Material grade, hole pattern, thread and surface finish should be defined by drawing.
- Sealing features and selective plating are possible requirements to review, not confirmed by the photos.
- Electrical, sealing and insulation performance depend on the complete bushing or equipment design.
Manufacturing Process
| Stage | Description |
|---|---|
| Drawing and material review | Confirm grade, standard, dimensions, palm-hole pattern and base thread |
| Stock and process planning | Review a suitable copper stock form and manufacturing route |
| Stem and base machining | Produce the cylindrical section, base and specified threaded opening |
| Palm machining | Mill the flat faces and drill the two specified holes |
| Surface finishing | Confirm whether selective plating or a defined unplated zone is required |
| Final inspection and packing | Inspect to the agreed plan and protect threads and machined faces |
Custom machining requirements can be reviewed through our Fine Machining page.
Manufacturing & Quality Control
| Control Point | Order-Level Check |
|---|---|
| Material identity | Confirm grade and supporting material documents |
| Base interface | Inspect the central thread, base dimensions and any specified sealing features |
| Flat palm | Check dimensions, flatness and hole spacing against the approved drawing |
| Circumferential band | Confirm construction, material and any plating or masking boundary requirements |
| Surface finish | Review machined areas and any specified coating |
| Functional testing | Define any electrical, fit, sealing or insulation tests before production |
| Documentation | Agree material certificates and inspection records for the shipment |
For inspection methods and available documentation, see our Quality Assurance page. Product-specific testing and acceptance criteria are confirmed before order placement.
Typical Applications
| Application | Potential Use |
|---|---|
| Insulating bushings | Conductor stem for a compatible bushing design |
| GIS or switchgear assemblies | Terminal component where the interfaces match the equipment design |
| Epoxy-cast electrical components | Embedded conductor or insert, if the material and surface zones are specified for casting |
| Transformer connections | Terminal component in an assembly designed for the specified geometry |
| Custom electrical equipment | Drawing-specific connection between a threaded base and flat palm |
Application suitability, sealing performance, voltage rating and standards compliance must be verified for the complete equipment design.
FAQ
It is a conductor component that connects a bushing interface to another electrical connection. This version has a two-hole flat palm and a cylindrical base with a central threaded opening.
The band is visible in the photos, but its material and construction cannot be confirmed from appearance alone. The supplied brief describes a selectively unplated copper zone as one possible design. Verify the drawing and actual finish before naming it that way.
The brief lists C10200, C10100 and C11000, among other designations. Confirm the exact grade and governing standard; similar designations should not be assumed interchangeable.
The supplied brief gives reference ranges for overall height, maximum diameter and palm thickness. These are not guaranteed standard sizes. Provide the drawing to confirm dimensions and manufacturing feasibility.
O-ring grooves are mentioned in the supplied brief, but they are not clearly established by these photos. Confirm the groove count and dimensions on the drawing if sealing is required.
Selective silver, nickel or tin plating is described in the brief, but the images do not establish the coating or its boundaries. Specify the substrate, plated zones, unplated zones and finish requirements in the inquiry.
The supplied brief references IEC 60137, but no product-specific compliance evidence was provided. State the required standard and acceptance criteria; confirm suitability at the bushing or equipment level.
Provide the material and standard, drawing, overall dimensions, palm-hole pattern, base thread, band and finish requirements, quantity, inspection documents and delivery destination.
Request a Quote
| Information Needed | Details to Provide |
|---|---|
| Material | Grade and applicable standard |
| Drawing | 2D/3D drawing with critical dimensions and tolerances |
| Flat palm | Thickness, hole diameters, spacing and chamfers |
| Base | Thread type, pitch, fit, depth and any sealing features |
| Band and finish | Construction, material, plated areas and any unplated zones |
| Quantity | Order quantity and sample requirement |
| Quality documents | Material certificate, inspection plan and required tests |
| Delivery | Destination, packing needs and target schedule |
Send the drawing and requirements through Contact Us for review.










