Custom Silver-Plated Pure Copper T-Section Stationary Knife Contact with Orthogonal Blade
Video
Short Description
A custom T-section copper stationary contact with a mounting seat and an orthogonal plug-in blade. The photographs show a recessed mounting hole in the base and a flat blade-style contact feature.
The supplied product notes specify pure copper and full-surface hard silver plating. Confirm the exact copper grade, construction route, coating requirements, dimensions and tolerances against the approved drawing and order specification.
Product Description
This custom T-section stationary contact is designed with a mounting base and a projecting blade positioned at a right angle to the base. The product notes describe a beveled blade lead-in and silver-plated copper construction. The precise blade profile, seating arrangement and whether the part is one-piece or assembled should be confirmed from the production drawing.
The product notes list pure-copper options including C11000 and C10200; the required grade, temper and material standard must be specified for each order. Reference dimensions and a silver-coating range are included below for review, not as guaranteed standard sizes or default specifications. For general material information, see our Pure Copper page.
Key Features
- T-section arrangement with a mounting base and perpendicular blade contact.
- Recessed mounting-hole feature visible in the base.
- Blade lead-in profile can be specified to suit the mating contact design.
- Product notes specify pure copper and hard silver plating; grade and coating details require order confirmation.
- Drawing-based review helps align the blade geometry, base and mating contact interface.
Typical Applications
| Application | Possible Use |
|---|---|
| GIS or C-GIS Equipment | Stationary contact or plug-in blade terminal in a design-specific assembly |
| Disconnectors and Earthing Switches | Contact interface subject to equipment and drawing requirements |
| Switchgear | Fixed contact component in a custom connection arrangement |
| Withdrawable Switchgear | Plug-in contact feature, subject to the mating contact and operating design |
| Power Distribution Equipment | Custom conductive interface where a perpendicular blade arrangement is required |
These are potential applications, not a confirmation of voltage class or equipment qualification. Final suitability depends on the mating contact design, electrical rating, temperature rise, insulation clearances, mechanical loads and applicable equipment standards.
Typical Manufacturing Process
The manufacturing route below is indicative. Confirm whether the design requires one-piece machining or a joined/composite construction before production.
| Step | Process | Details to Confirm |
|---|---|---|
| 1 | Drawing and Material Review | Confirm copper grade, temper, geometry and required documents |
| 2 | Base Preparation | Define mounting profile, hole and counterbore dimensions |
| 3 | Blade Feature Processing | Confirm blade thickness, lead-in shape, perpendicularity and mating dimensions |
| 4 | Construction or Joining | Specify one-piece construction or the required joining method, if applicable |
| 5 | Surface Preparation and Plating | Confirm hard silver plating, coverage, thickness and masking requirements |
| 6 | Final Inspection and Packing | Inspect agreed dimensions and finish; confirm protection for the blade and contact surfaces |
For custom copper machining and drawing-based processing, see our Fine Machining capabilities.
Manufacturing & Quality Control
| Control Point | Review Approach |
|---|---|
| Material | Confirm grade, temper and material identification against the order specification |
| Base Geometry | Check mounting dimensions, hole location and counterbore features against the drawing |
| Blade Geometry | Verify blade thickness, profile, orientation and perpendicularity to agreed criteria |
| Contact Interface | Review mating dimensions and surface condition to the approved drawing |
| Coating | Confirm coating specification and agreed coverage/thickness inspection where required |
| Electrical or Mechanical Validation | Contact resistance, temperature rise, short-circuit or operating-cycle tests only when specified and agreed for the complete assembly |
| Documentation | Confirm required material records and inspection reports before order placement |
For inspection methods and available documentation, see our Quality Assurance page. Product-specific testing, acceptance criteria and documents should be agreed before ordering.
Frequently Asked Questions
It is a contact component with a mounting base and a blade-style contact feature arranged at a right angle. The exact profile and mating interface depend on the equipment drawing.
The supplied product notes identify it as pure copper, but do not establish the certified grade for each order. Confirm the grade, temper, standard and required material documents in the RFQ.
The supplied product notes specify full-surface hard silver plating. Confirm the coating type, thickness, coverage and inspection requirements for the actual order. A photograph cannot verify coating composition or thickness.
The photographs do not establish the manufacturing route. The supplied notes mention both one-piece and composite possibilities, so specify the required construction and joining method, if any, on the drawing.
Yes, dimensions should be defined by the customer drawing. The ranges listed in the supplied notes are references only and require feasibility confirmation; they should not be treated as guaranteed standard sizes.
Potential applications include GIS, switchgear and disconnector assemblies. Confirm the voltage class, mating contact, current, temperature-rise limits, clearances and relevant equipment standard with the project engineer.
Provide a dimensioned drawing, material grade, base and blade dimensions, mounting-hole details, construction route, coating specification, tolerances, quantity, application and required documents.
RFQ Information
| Please Provide | Details |
|---|---|
| Material | Copper grade, temper and material standard |
| Drawing | 2D or 3D drawing with critical dimensions and tolerances |
| Base | Length, width, thickness, hole and counterbore details |
| Blade | Height, thickness, lead-in profile, orientation and mating dimensions |
| Construction | One-piece or joined/composite requirement and joining details, if applicable |
| Surface Treatment | Hard silver plating or other specified finish, coverage and thickness |
| Application | Equipment type, mating contact and operating requirements |
| Quantity | Sample quantity and production quantity |
| Documents | Material certificate, dimensional report or other required records |
| Delivery | Destination country, packing requirements and target schedule |
Send your drawing and requirements through Contact Us for material and manufacturing review.











