CNC-Turned Deep-Bored Pure Copper Cup Contact

Short Description:

Parameter Reference Specification / Order Requirement
Product Type Custom deep-bored copper cup contact or cup-shaped conductive housing
Main Geometry Hollow cylindrical cup with open mouth and bottom plate
Cup Outer Diameter Reference range: Ø25–Ø260 mm
Deep-Bore Inner Diameter Reference range: Ø20–Ø240 mm
Total Height Reference range: 25–350 mm
Side-Wall Thickness Reference range: 1.5–15.0 mm
Bottom-Plate Thickness Reference range: 3.0–30.0 mm
Central Bore Through-hole, counterbore, or internal thread according to drawing
Central Bore Diameter Reference range: Ø6–Ø100 mm
Rim Geometry Straight, tapered, beveled, or drawing-specific chamfered rim
Primary Material Options C10100, C10200, C11000 copper
Alternative Material Options C10400, C10700, or C18150 subject to application review
Material Standard Selected according to grade, starting form, and customer specification
Inner and Outer Diameter Tolerance Reference target: ±0.015 to ±0.03 mm
Central Bore Coaxiality Reference target: ≤0.015 mm to the specified outer datum
Wall Concentricity Reference target: ≤0.02 mm
End-Face Runout Reference target: ≤0.02 mm
Bottom Flatness Reference target: ≤0.02 mm
Surface Roughness Reference target: Ra 0.2–0.4 μm on designated surfaces
Hardness Reference range: 80–125 HV, depending on grade and condition
Surface Options Bare copper, agreed anti-tarnish treatment, silver plating, or nickel plating
Silver Plating Reference option: 5–30 μm on specified contact surfaces
Plating Allowance Must be included in the machining and inspection plan
Documentation Material, dimensional, surface, and coating documents according to purchase order

Product Detail

Product Tags

Video

Short Description

This custom copper cup contact is a CNC-machined hollow cylindrical component with a tapered or beveled rim, concentric internal cavity, relatively thin side wall, thick load-bearing bottom, and central mounting bore.

It can be produced from specified copper grades such as C10100, C10200, or C11000, with alternative materials reviewed for mechanical, thermal, or wear requirements. Bore diameter, wall thickness, central-hole coaxiality, bottom flatness, surface roughness, and plating requirements are confirmed by drawing.

Product Overview

A copper cup contact is used as a conductive cup, contact seat, electrode housing, or field-control component in an engineered electrical assembly. The photographed design has a large open cup mouth, a cylindrical internal cavity, a stepped or recessed internal bottom, and a central bore through the bottom plate.

The thin cylindrical wall can reduce material mass where the design permits, while the thicker bottom provides a stable area for mounting, brazing, fastening, or connection to another conductive component. The rim geometry may be adjusted to suit the mating contact, insulation clearance, or electric-field design.

Cymber Metal can review material and processing options through its Pure Copper product range. For custom boring, turning, drilling, deburring, and drawing-based dimensional control, the Fine Machining service is the appropriate starting point.

This component should not automatically be treated as a pressure vessel, vacuum enclosure, or certified high-voltage part. Final application suitability depends on the complete assembly, mating parts, operating conditions, and qualification testing.

Key Features

Feature Design Relevance
Hollow Cylindrical Cup Provides a defined conductive cavity and mating interface
Tapered or Beveled Rim Allows the mouth geometry to be adapted to assembly clearance and mating-part entry
Concentric Thin Wall Supports a controlled wall profile and can reduce mass where structurally acceptable
Thick Bottom Plate Provides a stronger area for mounting, brazing, fastening, or conductive attachment
Central Bore Supports a coaxial mounting, connection, fastening, or conductive-stem arrangement
Internal Step or Recess Can locate a mating component or provide a drawing-defined internal transition
CNC-Turned Surfaces Supports controlled diameters, flatness, runout, and surface finish
Optional Contact Plating Can be considered for specified wear, contact, or corrosion requirements
Drawing-Based Customization Allows the bore, rim, wall thickness, bottom thickness, and surface treatment to match the assembly

A tapered rim may support the electrical design, but it does not independently establish corona performance, partial-discharge performance, or a voltage rating.

Manufacturing Process

The manufacturing route depends on the selected copper grade, blank size, wall thickness, central-bore design, production quantity, and required inspection scope.

Stage Process Scope Main Control Point
Drawing and DFM Review Review cup section, bore, rim, bottom thickness, mounting interface, and critical datums Confirm machining access, allowances, and functional dimensions
Material Selection Select C10100, C10200, C11000, or another approved grade Confirm grade, condition, standard, and required documentation
Blank Preparation Prepare solid bar, tubular blank, or suitable preform according to the production route Maintain machining allowance and material traceability
Rough Turning and Boring Establish the outer diameter, cup mouth, internal cavity, and bottom section Control wall thickness and avoid distortion
Central Bore Machining Produce the through-hole, counterbore, or thread Control diameter, depth, position, and coaxiality
Rim and Internal Step Finishing Machine the tapered rim, chamfer, internal step, or transition Control entry geometry and edge condition
Finish Turning Complete internal and external cylindrical surfaces Control diameter, roundness, runout, and surface finish
Deburring and Cleaning Remove accessible burrs and clean the internal cavity Protect mating surfaces from loose particles or sharp edges
Surface Treatment Apply anti-tarnish treatment, silver plating, nickel plating, or another agreed finish Confirm coating coverage, thickness, and dimensional allowance
Final Inspection and Packing Complete agreed dimensional, material, finish, and documentation checks Protect the rim, bore, and finished surfaces during packing

The use of one setup or a dedicated high-rigidity machine can be evaluated for each design, but the final process route should be confirmed by the production plan rather than assumed from the product title.

Manufacturing & Quality Control

The most important inspection areas are the central bore, cup-mouth geometry, wall concentricity, bottom flatness, and the relationship between the bore and the external cylindrical datum.

Inspection Item Proposed Method / Control Acceptance Basis
Material Identity Review material certificate and perform appropriate composition verification when required Approved copper grade and purchase specification
Oxygen-Related Requirement Use a suitable oxygen-analysis method when a low-oxygen grade is specified Grade-specific requirement and agreed test documentation
Conductivity Conduct a suitable conductivity test under defined conditions Agreed value for the selected grade and condition
Outer Diameter Micrometer, roundness equipment, or CMM as appropriate Approved outside-diameter tolerance
Inner Cavity Diameter Bore gauge, internal measuring equipment, or CMM where accessible Approved cavity and bore dimensions
Central Bore Gauge, CMM, or suitable internal measurement method Diameter, depth, thread, and location requirements
Bore Coaxiality Datum-based CMM or approved coaxiality measurement Drawing-defined coaxiality target
Wall Concentricity Coordinate, roundness, or section-based measurement Approved wall-thickness variation
Rim Geometry Profile measurement or CMM inspection Taper, chamfer, radius, and mouth dimensions
Bottom Flatness Surface plate, height gauge, or CMM method Approved flatness requirement
End-Face Runout Dial indicator, CMM, or approved rotational measurement Approved runout limit
Surface Roughness Roughness tester on designated accessible surfaces Surface-specific Ra limit
Hardness Vickers testing at an agreed location Grade- and condition-specific hardness range
Internal Surface Visual inspection, magnification, or borescope where required No unacceptable burrs, damage, or contamination
Plating Thickness, coverage, adhesion, and appearance checks when plated Agreed coating specification
Traceability Link material, machining batch, surface treatment, and inspection records Purchase-order documentation requirements

For quality-support information, use Quality Assurance. Material certificates, first-article reports, dimensional reports, and third-party inspection should be requested in the RFQ if they are required.

Typical Applications

The following are potential application categories. The final use must be confirmed by the equipment designer and qualified against the complete assembly.

Application Potential Component Role Main Confirmation Requirements
Vacuum Interrupter Assemblies Cup-shaped conductive contact seat, electrode housing, or supporting contact component Vacuum brazing route, contact geometry, thermal cycling, and mechanical loading
Vacuum Circuit Breaker Contacts Dynamic or static contact cup used with an approved mating arrangement Opening speed, contact force, wear, conductivity, and alignment
SF6 Puffer-Cylinder Components Conductive cup or cylindrical interface within a puffer-type assembly Gas-system design, mechanical motion, temperature rise, and equipment qualification
GIS Corona-Control Components Copper cup or grading component around a conductor or connection region Electric-field analysis, clearances, insulation system, and partial-discharge testing
High-Current Contact Interfaces Conductive cup for a custom mounting or connection arrangement Current duty, joint resistance, heat rise, and thermal cycling
RF or Electron-Tube Components Copper cup or anode-related conductive component where specified Vacuum compatibility, thermal load, brazing, and dimensional stability
Custom Power Equipment Drawing-specific conductive housing or electrode support Full assembly drawing, applicable standard, and inspection requirements

The photographs alone do not establish suitability for 12–72.5 kV equipment, SF6 service, vacuum service, or any specific IEC rating.

Frequently Asked Questions

What is a copper cup contact?

A copper cup contact is a hollow cylindrical conductive component with an open cup section and a bottom interface. Depending on the drawing, it may serve as a contact seat, electrode cup, conductive housing, or field-control component. The central bore and bottom thickness are usually designed around a mounting or mating component.

What are the main visible features of this design?

The photographed part shows a cylindrical copper cup with a large open mouth, a tapered or rounded rim, a thin cylindrical wall, a thicker bottom section, an internal step or recessed region, and a central bore. The exact dimensions and whether the central feature is a through-hole, counterbore, or thread must be confirmed from the drawing.

Which copper grades can be used?

C10100, C10200, and C11000 are possible starting options identified in the product brief. C10100 or C10200 may be considered when low-oxygen requirements are important, while C11000 may be suitable for other conductive applications. C10400, C10700, or C18150 can be reviewed for different strength or softening requirements, but they are not automatic substitutes.

Can this copper cup be used in a vacuum interrupter?

It may be considered for a vacuum interrupter assembly when the material, surface cleanliness, brazing route, outgassing requirements, contact geometry, and equipment qualification are suitable. Vacuum service cannot be confirmed from appearance alone. The customer should provide the assembly drawing, brazing temperature, vacuum requirements, and required inspection documents.

What is the function of the thick bottom?

The thick bottom can provide a stable area for a central bore, conductive stem, mounting feature, brazed connection, or mechanical load transfer. Its final thickness depends on the required load, thermal path, drilling or threading depth, and material condition.

Can the central bore be threaded or counterbored?

Yes, a through-hole, counterbore, or internal thread can be considered when specified by drawing. The thread designation, tolerance class, depth, bottom form, and relationship to the outer cylindrical surface must be supplied before machining.

Can the cup be silver plated?

Silver plating can be reviewed for specified contact or wear surfaces. The product brief gives 5–30 μm as a reference range. The RFQ should define the plating type, thickness, coverage, masking, adhesion requirements, and whether dimensions are measured before or after plating. Nickel plating or an agreed copper surface treatment may also be considered.

What information is needed for a quotation?

Please provide the 2D drawing or 3D model, copper grade, outer and inner dimensions, total height, wall and bottom thickness, central-bore details, tolerance, surface finish, plating, quantity, application, required inspection documents, destination, and target schedule. If the part is for vacuum or high-voltage equipment, include the relevant assembly and qualification requirements.

Request a Quote

RFQ Item Information to Provide
Drawing Package Dimensioned 2D drawing and available STEP or other 3D model
Material Copper grade, standard, condition, and oxygen-related requirement
Main Dimensions Outer diameter, inner diameter, total height, wall thickness, and bottom thickness
Central Feature Through-hole, counterbore, internal thread, diameter, depth, and tolerance
Rim Geometry Taper angle, chamfer, radius, entry diameter, and surface requirements
Critical Tolerances Diameter, concentricity, coaxiality, runout, flatness, and roughness
Electrical Requirements Conductivity, current, temperature rise, contact resistance, and operating environment
Surface Treatment Bare copper, anti-tarnish, silver, nickel, thickness, coverage, and masking
Application Vacuum interrupter, GIS, SF6 equipment, RF component, or custom assembly
Quantity Prototype, sample, batch quantity, and expected repeat demand
Quality Documents Material certificate, dimensional report, first-article report, or third-party inspection
Packing and Delivery Destination, packing requirements, and target schedule

Contact Us with the drawing and specifications so the material route, machining feasibility, coating process, inspection scope, and quotation can be reviewed.


  • Previous:
  • Next:

  • Write your message here and send it to us