CNC Machined Pure Copper Cup Contact with Central Bore and Anti-Rotation Notch

Short Description:

Parameter Specification / Confirmation Basis
Product type Custom CNC-machined copper cup contact or cup electrode
Material Pure copper or other copper grade according to approved drawing and electrical requirements
Common grade options C10100, C10200, C11000, or another specified copper grade; confirm before production
Visible geometry Hollow cylindrical body with rounded or beveled upper rim
Internal cavity Stepped internal cavity with a circular shoulder or ring feature
Bottom section Thicker flat-bottom section visible in the supplied images
Central bore Circular coaxial bore; diameter and depth require drawing confirmation
Locating feature Bottom-edge rectangular or radial anti-rotation notch/keyway
Outer diameter To be defined by drawing
Inner diameter To be defined by drawing
Total height To be defined by drawing
Wall thickness To be defined by drawing; uniformity depends on the manufacturing route
Surface finish Machined copper surface; polishing, cleaning, passivation, or plating available when specified
Optional plating Silver, nickel, tin, or other compatible finish subject to application review
Dimensional tolerance Drawing-controlled; feasibility confirmed after review of critical features
Surface roughness Specified by drawing and functional contact requirements
Applicable standards ASTM, EN, JIS, GB/T, or customer specification as required
Inspection documents Dimensional report, material documentation, conductivity data, and third-party inspection options can be discussed

Product Detail

Product Tags

Video

Short Description

This CNC machined pure copper cup contact is a hollow cylindrical conductive component with a rounded upper rim, internal stepped cavity, central bore, and bottom perimeter locating notch. The visible geometry is suitable for applications requiring a guided copper contact, electrode cup, or conductive interface with controlled angular positioning. Material grade, bore dimensions, wall thickness, tolerances, surface finish, plating, and inspection documents can be confirmed against the approved drawing and application requirements.

Product Overview

The supplied product brief describes a custom copper cup contact produced through turning, boring, and indexed milling. The component has a cylindrical outer wall, a thickened bottom section, a central through-bore, an internal circular step or ring feature, and a bottom-edge notch for locating or anti-rotation positioning.

The product can be specified in oxygen-free copper, electrolytic tough-pitch copper, or another copper grade selected for the required conductivity, thermal performance, machinability, and brazing conditions. For material selection, buyers can compare available Pure Copper forms and confirm the suitable grade through a drawing or RFQ.

The cup may be considered for vacuum interrupter contacts, switchgear electrodes, SF6 circuit-breaker assemblies, RF or vacuum-device components, and other custom conductive interfaces. Final suitability depends on the electrical load, temperature, mechanical movement, brazing method, cleanliness requirements, and qualification procedure.

Quick Technical Answer

This is a custom CNC copper cup contact with a hollow cylindrical body, central bore, internal step, rounded rim, and bottom locating notch. The notch can help control angular orientation during assembly, while the central bore provides a coaxial mounting or connection feature. Exact grade, dimensions, tolerances, plating, and vacuum or electrical qualification should be confirmed from the customer drawing.

Key Features

Feature Buyer Value
Hollow cylindrical construction Reduces unnecessary mass while retaining a defined conductive body
Central coaxial bore Supports mounting, brazing, alignment, or connection features
Internal step or ring feature Provides a controlled seating surface for a mating component
Bottom anti-rotation notch Helps locate the cup angularly during assembly or fixturing
Rounded upper rim Supports smoother mating geometry and reduces sharp-edge interference
Thickened bottom section Provides additional material around the bore and locating feature
CNC turn-mill processing Allows turning, boring, and indexed milling to be coordinated from one process plan
Custom copper material selection Allows conductivity, machinability, strength, and thermal requirements to be balanced
Optional finishing Cleaning, passivation, plating, or protective packaging can be reviewed by application

Manufacturing Process

Process Stage Description
1. Drawing and material review Confirm copper grade, standards, dimensions, critical tolerances, bore geometry, notch position, surface requirements, and intended application.
2. Material preparation Select copper bar, tube, forged blank, or other suitable starting form according to the final geometry and material requirements.
3. Rough turning Establish the outside cylindrical profile and prepare the blank for cavity machining.
4. Internal boring Machine the hollow cavity, internal step, bottom shoulder, and central bore according to the approved drawing.
5. Rim and edge machining Form the rounded or beveled upper rim and remove specified sharp edges.
6. Indexed bottom milling Machine the perimeter locating notch or keyway at the required angular position.
7. Deburring and cleaning Remove machining burrs and clean the part according to the required electrical, brazing, or assembly conditions.
8. Optional surface treatment Apply silver, nickel, tin, passivation, or another specified finish when compatible with the application.
9. Inspection and packing Check critical dimensions, bore position, notch location, surface condition, and documentation before shipment.

For complex copper parts, Cymber Metal can review the drawing and processing route through its Fine Machining capability. Final tolerance feasibility depends on material condition, geometry, quantity, tooling, and inspection method.

Manufacturing & Quality Control

Control Stage Control Method Order-Specific Confirmation
Raw material Review grade, heat/lot information, chemical composition, and required material certificate Confirm required grade and certificate format
Blank dimensions Verify starting diameter, length, or wall section before machining Based on approved process plan
Turning and boring Inspect outside diameter, cavity diameter, bore size, depth, and step location Critical dimensions listed on drawing
Coaxial features Check central bore position relative to the outer cylindrical surface CMM or suitable gauge where required
Anti-rotation notch Check notch width, depth, angular position, and edge condition Datum scheme must be defined by drawing
Surface quality Visual inspection and roughness measurement where specified Confirm Ra requirement and measurement location
Conductivity Conductivity testing can be arranged for the selected copper grade Test method and acceptance value require confirmation
Plating or coating Verify coating type, coverage, thickness, and adhesion when applicable Plating standard and thickness specified by RFQ
Cleaning Apply cleaning and packaging controls appropriate to assembly or brazing requirements Confirm whether vacuum-compatible cleaning is required
Final inspection Compile dimensional inspection records and agreed quality documents MTC, inspection report, SGS, RoHS, REACH, or third-party inspection as requested

For quality documentation and inspection planning, buyers can review Cymber Metal’s Quality Assurance information. No specific tolerance, conductivity value, vacuum qualification, or certificate should be treated as included until it is confirmed in the quotation and purchase order.

Typical Applications

Application Possible Function Engineering Note
Vacuum interrupter assemblies Copper cup contact, electrode support, or conductive interface Vacuum cleanliness, brazing, outgassing, and electrical qualification require confirmation
Medium- and high-voltage switchgear Custom cup-shaped contact or electrode component Voltage, current, insulation clearance, and contact force must follow the equipment design
SF6 circuit-breaker assemblies Conductive cup, contact support, or alignment component Gas-system compatibility and operating temperature require application review
RF and vacuum devices Copper electrode cup or conductive terminal component Thermal cycling, surface condition, and joining process should be specified
Custom electrical assemblies Machined conductive housing, contact seat, or mounting interface Drawing, quantity, tolerance, and finish determine the practical production route

Frequently Asked Questions

What is this copper cup contact used for?

It is a custom conductive cup-shaped component that can be used as a contact, electrode cup, contact seat, or conductive mounting interface. Potential applications include vacuum interrupters, switchgear, SF6 assemblies, RF equipment, and other electrical systems. Final suitability depends on the customer’s drawing and operating conditions.

Which copper grades can be used?

Possible options include C10100, C10200, C11000, and other copper grades selected according to conductivity, thermal performance, machinability, brazing requirements, and availability. The final grade and applicable standard should be confirmed before production.

Can the central bore and internal step be customized?

Yes. The central bore diameter, depth, shoulder position, internal radius, cavity depth, and step geometry can be manufactured according to a 2D drawing or 3D model. Critical datums should be identified so that coaxiality and positional requirements can be evaluated correctly.

What is the purpose of the bottom notch?

The bottom notch can act as a locating keyway or anti-rotation feature. It may help maintain the correct angular orientation during assembly, brazing, or installation. Its width, depth, angle, and datum relationship must be specified on the drawing.

Is plating available for this copper cup?

Optional silver, nickel, tin, passivation, or other compatible surface treatments can be reviewed. The correct finish depends on conductivity, wear, corrosion, brazing, temperature, and contact requirements. Plating thickness and standard should be confirmed in the RFQ.

Can the part be supplied for vacuum-brazing applications?

The part can be reviewed for vacuum-brazing applications, but vacuum performance cannot be confirmed from the product shape alone. Copper grade, cleanliness, surface preparation, braze alloy, furnace cycle, leak requirements, and customer qualification criteria must be agreed before production.

What inspection documents are available?

Depending on the order, documentation may include material certificates, dimensional inspection reports, conductivity results, plating records, SGS or third-party inspection, and RoHS or REACH documents where applicable. Required documents should be listed before quotation.

What information is needed for a quotation?

Please provide the drawing or dimensions, copper grade or standard, quantity, critical tolerances, central bore and notch requirements, surface finish or plating, application, inspection documents, destination, and target delivery schedule.

RFQ Information

Required Information Details to Provide
Drawing 2D drawing, 3D model, or dimensioned sketch
Material Grade, standard, temper, conductivity, and brazing requirement
Dimensions Outer diameter, inner diameter, height, bore, wall thickness, step, and notch
Tolerances General tolerance and all critical dimensional or positional tolerances
Surface Machined finish, polishing, passivation, silver/nickel/tin plating, or other treatment
Quantity Prototype, sample, batch quantity, and estimated annual demand
Application Vacuum interrupter, switchgear, SF6 assembly, RF equipment, or other use
Inspection MTC, dimensional report, conductivity test, SGS, RoHS, REACH, or third-party inspection
Delivery Destination country, required arrival date, packing, and shipping requirements

For a drawing review and quotation, please Contact Us with the product drawing and required specifications.


  • Previous:
  • Next:

  • Write your message here and send it to us