Monoblock Cantilevered Hammerhead Pure Copper Stationary Blade Contact

Short Description:

Item Reference Specification
Product Type Monoblock stationary blade contact / knife contact terminal
Material Pure copper; C11000, C10200, T2, TU1 or TU2 may be considered subject to drawing and order confirmation
Visible Geometry Flat dual-hole base flange, raised blade section, hammerhead-style retaining area and integral root reinforcement
Overall Dimensions Custom drawing-based design; source reference range: length 25–280 mm, width 20–180 mm, total height 20–160 mm
Blade Thickness Reference tolerance ±0.015–0.03 mm; final value to be confirmed
Blade-to-Base Perpendicularity Reference value ≤0.02 mm; confirm by drawing
Base Contact Face Flatness Reference value ≤0.015–0.025 mm
Working Surface Roughness Reference value Ra ≤0.2–0.4 μm
Hardness H02 or H04 temper may be considered; reference hardness 90–130 HV
Surface Finish Bright copper, anti-tarnish passivation, tin plating, nickel plating or silver plating
Plating Optional hard silver plating, tin plating or nickel plating; thickness and area to be specified
Reference Standards ASTM B187, ASTM B152, ASTM B133, EN 13601, EN 13605, JIS H3140 or GB/T 5585 may apply depending on grade and order
Electrical Performance Conductivity and temperature-rise requirements to be verified according to material, cross-section and assembly design
Inspection Dimensional, surface, flatness, hardness, conductivity and plating checks according to the agreed inspection plan
Application Draw-out switchgear, breaker contact assemblies, MCCs, disconnectors and custom high-current electrical equipment

Product Detail

Product Tags

Video

Short Description

This monoblock pure copper stationary blade contact is designed for custom switchgear, breaker and plug-in electrical assemblies. It features a dual-hole rectangular mounting flange, cantilevered hammerhead-style contact geometry, an integral root gusset and a formed lead-in section. Dimensions, copper grade, tolerance, plating and inspection requirements are confirmed from the customer drawing.

Product Overview

The supplied sample is a custom copper stationary blade contact with a flat rectangular base flange, two mounting holes, a raised blade section and a reinforced transition between the blade and base. The hammerhead-style end geometry can support controlled positioning or retention in a mating switchgear assembly, subject to final design validation.

Cymber Metal can review pure copper grade selection, blank preparation and machining through its Pure Copper and Fine Machining capabilities.

The component may be supplied with bright copper, anti-tarnish treatment, tin plating, nickel plating or silver plating when required by the application. Plating feasibility and thickness should be confirmed through the drawing and the required Busbar Plating Shop process.

For switchgear assemblies, this component can be evaluated alongside other switchgear pure copper links according to current, temperature-rise, mating-contact and installation requirements.

Key Features

Feature Description
Monoblock Copper Construction One-piece contact geometry can reduce the number of separate mechanical joints in the current path.
Hammerhead-Style Contact End The formed end can provide a defined retention or travel-limiting interface in a mating assembly.
Integral Root Reinforcement The reinforced blade-to-base transition helps maintain structural support during installation and operation.
Dual-Hole Mounting Flange Two mounting holes support bolted positioning on a switchgear or busbar assembly.
Custom Lead-in Geometry Beveled or radiused entry features can be adjusted for mating clearance and insertion requirements.
CNC-Ready Design Complex contours, hole positions, thickness transitions and edge details can be produced from 2D or 3D drawings.
Optional Surface Treatment Copper, tin, nickel or silver finishes can be evaluated according to contact environment and mating material.
Drawing-Based Quality Control Final dimensions, tolerances and documents are controlled according to the approved customer specification.

Manufacturing Process

Process Stage Manufacturing Description
1. Drawing and DFM Review Review material grade, flange dimensions, mounting-hole pattern, blade geometry, mating clearance and inspection requirements.
2. Copper Blank Preparation Select a suitable pure copper plate, bar, formed blank or extruded section according to the geometry and production quantity.
3. Cutting and Forming Cut the blank to length and establish the base, blade and transition areas using suitable forming or machining operations.
4. CNC Contour Machining Machine the hammerhead section, root reinforcement, beveled lead-in, holes and other three-dimensional features.
5. Deburring and Surface Preparation Remove burrs, protect mounting edges and prepare the working surfaces for assembly or plating.
6. Plating or Passivation Apply anti-tarnish treatment, tin, nickel or silver plating when required by the approved drawing.
7. Final Inspection Check dimensions, hole positions, perpendicularity, flatness, surface finish and other specified characteristics.
8. Packaging and Traceability Pack the finished contacts with part identification and applicable inspection records.

Manufacturing & Quality Control

Control Point Quality Control Method
Material Identity Confirm copper grade, temper and heat or batch information against the purchase specification and material documents.
Chemical Composition Material analysis or mill documentation can be provided when required by the order.
Electrical Conductivity Conductivity testing method and acceptance value are agreed according to grade and application.
Dimensional Inspection Calipers, gauges, vision measurement or CMM inspection can be used for blade thickness, hole positions and formed features.
Perpendicularity and Flatness Check the blade-to-base relationship and mounting face flatness against the approved drawing.
Surface Inspection Inspect burrs, scratches, oxidation, edge condition and working-face finish before shipment.
Hardness Verification Vickers hardness testing can be arranged when the specified temper requires verification.
Plating Inspection Plating coverage, appearance and thickness are checked according to the selected surface-treatment specification.
Traceability Production and inspection records can be linked to the material batch and order documentation.
Quality Documentation Material certificates, dimensional reports and third-party inspection documents can be discussed according to project requirements.

Cymber Metal’s public quality information includes ISO 9001:2015 quality management and inspection support. Product-specific certification, testing scope and document availability should be confirmed before order placement. See the Quality Assurance page for the company’s quality information.

Typical Applications

Application Product Role Confirmation Required
Draw-out Switchgear Stationary blade contact for a plug-in or blind-mate primary circuit interface Mating blade, current, temperature rise and insulation clearance
Air Circuit Breakers Fixed contact or stationary blade block for an ACB assembly Breaker model, contact travel, short-time current and mounting pattern
Medium-Voltage Vacuum Switchgear Custom stationary contact or conductive interface Rated voltage, current, creepage, clearance and equipment design
Motor Control Centers Plug-in contact component for withdrawable feeder units Feeder configuration, insertion force and maintenance requirements
Disconnectors and Isolators Stationary conductive contact for controlled mechanical engagement Contact pressure, motion range and environmental conditions
Busbar and Distribution Assemblies Machined copper interface between a busbar and switching component Cross-section, connection method and heat-dissipation requirements
New-Energy Electrical Equipment Custom copper contact for battery, inverter or distribution assemblies Current profile, thermal cycling, coating and enclosure conditions
Prototype and Replacement Parts Drawing-based replacement or development component Existing sample, 2D/3D drawing and reverse-engineering requirements

FAQ

What is a pure copper stationary blade contact?

It is a fixed conductive component used in a switchgear, breaker or plug-in electrical assembly. The sample shown has a flat mounting flange, two holes and a raised blade section that interfaces with a mating conductive part.

Can this contact be used in an air circuit breaker?

It may be suitable for an air circuit breaker when its dimensions, contact travel, current requirement and mounting pattern match the equipment design. Final compatibility must be checked against the breaker drawing and operating conditions.

Which copper grades are available?

Possible grades include C11000, C10200, T2, TU1 and TU2, subject to availability and technical confirmation. The final grade should be selected according to conductivity, forming, machining, hardness and applicable standard requirements.

Can the hammerhead and root gusset be customized?

Yes. The hammerhead end, blade width, root transition, dual-hole flange and mounting geometry can be adjusted from a 2D or 3D drawing. Clearance and mating-contact requirements should be supplied during quotation.

What tolerances can be achieved?

The supplied product information lists reference values for blade thickness, perpendicularity, flatness and surface roughness. The achievable tolerance depends on material condition, geometry, batch size and inspection method, so it must be confirmed by drawing review.

Are plating and anti-tarnish treatments available?

Optional finishes may include bright copper, anti-tarnish passivation, tin, nickel or silver plating. The required plating area, thickness, contact surface and mating material should be specified before production.

What quality documents can be supplied?

Depending on the order, documentation may include material certificates, dimensional inspection reports, conductivity or hardness results and third-party inspection documents. The exact document package should be agreed before production.

What information is needed for a quotation?

Please provide the drawing or sample, copper grade, overall dimensions, tolerances, quantity, surface treatment, application, operating current, destination and document requirements. This allows the material and manufacturing route to be reviewed accurately.

Request a Quote

Required Information Buyer Details
Drawing or Sample 2D drawing, 3D model or physical reference sample
Material C11000, C10200, T2, TU1, TU2 or required equivalent
Dimensions Overall size, blade thickness, hole diameter, hole spacing and mounting details
Tolerances Thickness, flatness, perpendicularity, surface roughness and positional tolerances
Quantity Prototype quantity, trial batch and expected annual volume
Processing Cutting, forming, CNC machining, deburring, plating or passivation
Application ACB, VCB, switchgear, MCC, disconnector, busbar or other equipment
Electrical Requirements Current, temperature, duty cycle, contact pressure and mating material
Quality Documents MTC, dimensional report, conductivity, hardness, plating or third-party inspection
Delivery Details Destination country, packaging, Incoterms and target schedule

For a drawing-based review, contact Cymber Metal for an RFQ. Final price, lead time, minimum order quantity and production feasibility should be confirmed after reviewing the complete requirements.


  • Previous:
  • Next:

  • Write your message here and send it to us