Copper Stationary Terminal Flange for Vacuum Circuit Breakers

Short Description:

Item Specification
Product Copper Stationary Terminal Flange / Contact Mounting Base
Material Options C11000 (ETP), C10200 (oxygen-free) or C10100 (oxygen-free electronic copper), as specified
Applicable Standards ASTM B187/B187M where applicable to bar feedstock; forging specifications agreed for the selected grade and route. Finished component acceptance to the approved drawing
Production Route CNC machining from copper bar or a forged blank, subject to technical review
Outer Flange Diameter 40–350 mm indicative range; subject to drawing review
Overall Height 20–200 mm indicative range; subject to geometry and process review
Mounting Features Raised mounting face, central locating recess and threaded holes; dimensions and hole pattern to drawing
Peripheral Geometry Rounded outer rim and annular relief groove; radii, clearances and profile to drawing
Tolerance and Roughness Fits, face runout, alignment, flatness and surface roughness according to the approved drawing and feasibility review
Surface Finish Machined and cleaned; anti-tarnish treatment where specified
Plating Options Optional silver, tin or nickel plating; coverage, thickness and finished dimensions agreed before production
Inspection Material verification, dimensions, threads and surface condition; conductivity, roughness, ultrasonic and coating checks as agreed
Documentation Material test certificate, dimensional report and coating records as specified; EN 10204 Type 3.1 documentation subject to order confirmation

Product Detail

Product Tags

Video

Short Description

Cymber Metal supplies custom copper stationary terminal flanges for vacuum circuit breaker assemblies. These pure copper components combine a raised mounting face, a central locating recess, threaded mounting holes and a rounded outer flange.

Material, contact interfaces, annular grooves and optional plating are specified to approved drawings. The illustrated four-hole design is a reference configuration; electrical ratings and dielectric performance depend on the complete equipment design and validation.

Key Features

  • Raised contact mounting face with drawing-defined locating and fastening features.
  • Rounded outer profile and annular clearance groove machined to the required geometry.
  • Custom copper grade, hole pattern, surface finish and plating specification.

Manufacturing & Quality Control

Stage Scope
Material and Drawing Review Confirm grade, blank route, mating parts, datums and acceptance criteria
CNC Machining Use CNC machining support for faces, recesses, annular grooves and threaded features
Finishing Deburr and clean; apply specified surface treatment or plating with agreed masking
Final Inspection Check critical dimensions, threads and surfaces; complete agreed material/coating tests and protective packaging

For inspection methods and available documentation, see our Quality Assurance page. Product-specific testing and acceptance criteria are confirmed before order placement.

Typical Applications

  • Stationary terminal and conductive flange assemblies in vacuum circuit breakers.
  • Contact mounting bases in drawing-defined embedded-pole assemblies.
  • Tulip-contact supports and conductive connections in switchgear; GIS applications subject to equipment-specific review.

Copper Stationary Terminal Flange FAQ

What is this flange used for?

It provides a conductive mounting interface in the specified circuit-breaker assembly. The raised face, locating recess and threaded holes connect to the mating contact system. It is not, by itself, an arc-interrupting contact or a hermetic vacuum-sealing flange.

Which copper grade should I specify?

C11000, C10200 and C10100 can be reviewed against the required conductivity, oxygen content, material condition and processing route. State the grade and material standard on the drawing; different national grade designations are not automatically interchangeable.

Can tight runout and surface-finish requirements be met?

Requirements are reviewed feature by feature rather than applied as a blanket tolerance. Specify datums, runout, flatness, hole position and roughness, and identify whether dimensions apply before or after plating.

Does the rounded rim guarantee corona-free operation?

No. The rim and annular groove are drawing-defined geometry, not proof of a voltage rating or partial-discharge performance. Electric-field distribution, insulation clearances and equipment-level dielectric testing must be assessed for the complete assembly.

Can the contact surfaces be silver-plated?

Full or selective silver plating can be reviewed, with tin or nickel where specified. Provide coating thickness, undercoat, masking and acceptance requirements. Critical fits and contact-face dimensions must account for the coating.

What inspection documents can accompany the flanges?

Material certificates, dimensional reports and coating records can be agreed with the order. Conductivity, roughness, thread-gauge and ultrasonic inspection require defined methods and coverage. EN 10204 Type 3.1 documentation should be confirmed before order placement.

Request a Quote

Contact Cymber Metal with your 2D/3D drawing, copper grade, quantity, mating-contact details, critical tolerances, surface/plating requirements, inspection documents, destination and required delivery date. Include equipment voltage class and current requirements for technical review.


  • Previous:
  • Next:

  • Write your message here and send it to us