Triangular Copper Connection Bracket for High-Current Assemblies

Short Description:

Item Specification
Product Triangular Copper Connection Bracket / U-Slot Conductive Block
Material Options C11000 (ETP), C10200 (oxygen-free) or C10100 (oxygen-free electronic copper), as specified
Applicable Standards ASTM B152/B152M or ASTM B187/B187M where applicable to plate/bar feedstock; forging specifications agreed for the selected grade and route. Finished component acceptance to the approved drawing
Production Route One-piece body CNC-machined from plate, bar or a forged blank, as agreed
Overall Length × Width 50 × 50 mm to 500 × 500 mm indicative range; subject to drawing review
Overall Thickness / Height 20–200 mm indicative range; local web thickness and boss heights defined separately by drawing
Bore Diameter 8–150 mm indicative range; each bore size subject to boss diameter and minimum wall requirements
Mounting Layout Three corner bosses and a central bore; hole spacing, orientation and contact interfaces to drawing
U-Slot Geometry Opening width, depth, root radius and adjacent wall thickness to the approved mating-part design
Tolerance and Roughness Hole position, bore fits, face flatness, slot parallelism and surface roughness confirmed by feature and process review
Surface Finish Machined and deburred; cleaning and optional anti-tarnish treatment as specified
Plating Options Optional full or selective silver, tin or nickel plating; coverage, thickness and finished dimensions agreed before production
Inspection Material verification, hole pattern, slot geometry, contact faces and surface condition; conductivity, roughness, ultrasonic and coating checks as agreed
Documentation Material test certificate, dimensional report and coating records as specified; EN 10204 Type 3.1 documentation subject to order confirmation

Product Detail

Product Tags

Video

Short Description

Cymber Metal supplies custom triangular copper connection brackets for high-current electrical assemblies. Made from specified pure copper, the one-piece body combines three corner mounting bosses, a central bore and an open U-shaped slot.

Hole spacing, slot geometry, contact faces and optional plating are prepared to approved drawings. The design can be reviewed for busbar, terminal or cable-connection interfaces; current capacity, temperature rise and mechanical loading depend on the complete assembly.

Key Features

  • Three integral corner bosses within a triangular mounting layout.
  • Open U-shaped slot with drawing-defined clearance and root geometry.
  • Central bore and contact faces matched to the mating assembly.
  • One-piece conductive body with optional full or selective plating.

Manufacturing & Quality Control

Stage Scope
Material and Drawing Review Confirm copper grade, condition, blank route, mating parts and critical dimensions
CNC Machining Use CNC machining support for the outer profile, bosses, bores, slot and contact faces; select the sequence to manage distortion
Finishing Deburr hole edges and slot transitions, clean, and apply agreed surface treatment or plating
Final Inspection Verify drawing-defined dimensions and surfaces, complete agreed material/coating checks, and protect contact faces for shipping

For inspection methods and available documentation, see our Quality Assurance page. Product-specific testing and acceptance criteria are confirmed before order placement.

Typical Applications

Potential uses, subject to equipment-specific design review:

  • Conductive connection brackets in switchgear and disconnectors.
  • Busbar and terminal interfaces in resistance-welding secondary circuits.
  • Connection supports for furnace power-cable assemblies.
  • Common-potential busbar junctions in high-power rectifier equipment.

Triangular Copper Connection Bracket FAQ

Does three-point mounting mean a three-phase connection?

No. Three-point describes the corner mounting layout, not three electrically isolated phases. The one-piece copper body is electrically continuous. It can connect drawing-defined points at a common potential, but must not bridge separate phases.

Which copper grade should I choose?

C11000, C10200 and C10100 can be reviewed against the required conductivity, material condition and service environment. Where greater strength is needed, a copper-alloy alternative such as C18150 requires separate review; it is not an automatic substitute for pure copper.

Can the U-slot and mounting holes be customized?

Yes, subject to drawing review. Specify the mating-part dimensions, slot width and depth, root radius, hole pattern and contact-face datums. Tight tolerances are confirmed feature by feature, including whether acceptance applies before or after plating.

What current or voltage rating does the bracket have?

There is no universal rating based on shape or copper grade alone. Current path, contact pressure, joint resistance, cooling, duty cycle and insulation clearances must be assessed in the complete assembly. Temperature-rise, dielectric and short-circuit requirements need defined validation criteria.

Can the contact surfaces be silver-plated?

Full or selective silver plating can be reviewed, with tin or nickel where specified. Provide coating thickness, undercoat, masking and acceptance requirements. Slot clearances, bore fits and contact-face dimensions must account for the coating.

What inspection documents are available?

Material certificates, dimensional reports and coating records can be agreed with the order. Conductivity, surface roughness and ultrasonic inspection require defined methods and coverage. EN 10204 Type 3.1 documentation and third-party inspection should be confirmed before production.

Request a Quote

Contact Cymber Metal with your 2D/3D drawing, copper grade and condition, quantity, mating-part details, critical dimensions, contact loading, plating requirements, inspection documents, destination and required delivery date. Include operating current, duty cycle, cooling conditions and equipment voltage where relevant.


  • Previous:
  • Next:

  • Write your message here and send it to us