Products
-
Cold-Drawn Central-Grooved Pure Copper Profile
Item Specification Product Cold-Drawn Central-Grooved Pure Copper Profile Product Form Grooved copper bar, profile blank, busbar section or custom baseplate blank Available Grades C11000, C10200, C10100; C10400/C10700 silver-bearing copper subject to review Applicable Standards ASTM B187/B187M, ASTM B152/B152M, ASTM B272, EN 13601, EN 13605, JIS H3100, JIS H3140, GB/T 5585 or agreed customer specification Manufacturing Route Hot extrusion followed by precision cold drawing, straightening and cold sawing Overall Width × Thickness Indicative range: 15–300 mm × 3–60 mm Central Groove Flat-bottom rectangular groove; symmetrical or offset Groove Width Indicative range: 4–180 mm Groove Depth Indicative range: 0.5–35 mm Supply Length Cut lengths approximately 20–1200 mm; bars approximately 1000–6000 mm subject to section design Temper H02/H04 hard temper or O60 annealed condition, depending on grade and requirement Electrical Conductivity Target values from 98% IACS for applicable grades; confirm by grade, temper and test method Thermal Conductivity Selected oxygen-free grades may provide approximately 390–398 W/(m·K); confirm by material certificate Groove Tolerance Indicative range: ±0.015–0.04 mm Groove-to-Back Parallelism Indicative value: ≤0.02 mm Overall Flatness Indicative value: ≤0.02–0.04 mm per 100 mm Surface Roughness Indicative range: Ra ≤0.2–0.4 μm Surface Options Bright copper, anti-tarnish passivation, silver plating, tin plating or nickel plating Plating Standards ASTM B700, ISO 2093, ISO 1456 or ASTM B733 where applicable Secondary Operations Cutting, drilling, punching, tapping, chamfering, deburring and CNC machining Inspection Chemical composition, conductivity, hardness, profile dimensions, flatness, parallelism and surface inspection Documentation Material certificate, dimensional report and process records according to order requirements -
Custom Double-Sided Stepped Copper Profile
Item Specification Product Double-Sided Stepped Copper Profile / Raised-Center Copper Baseplate Blank Material Options UNS C11000 ETP, C10200 oxygen-free or C10100 oxygen-free electronic copper, subject to confirmation Applicable Standards ASTM B187/B187M, EN 13605 or agreed customer specification, depending on product form and production route Cross-Section Wide central raised pad, recessed side flanges and rear edge rebates Overall Width Indicative enquiry range: 20–320 mm Total Thickness Indicative enquiry range: 3–50 mm Central Pad Width, height and position according to the approved drawing Side Flanges Symmetrical or asymmetrical widths and thicknesses, subject to review Rear Features Edge rebates, locating shoulders or relief grooves as specified Cut-to-Length Blanks Indicative enquiry range: 20–1200 mm Longer Profile Bars Indicative enquiry range: 1000–6000 mm, subject to section and production route Supply Forms Profile bar, cut plate blank or further-machined component Material Condition Annealed or cold-worked condition, as specified Surface Options Bare copper, anti-tarnish treatment or optional nickel, silver or tin plating Custom Machining Holes, threads, slots, joining grooves and finished interface surfaces Tolerance Step dimensions, parallelism, flatness and length according to the approved drawing Inspection Profile dimensions, surface condition and flatness; composition, hardness, conductivity or additional testing as specified Documentation Material test certificate, dimensional report and treatment records available as agreed -
Obtuse-Angle Unequal-Leg Copper Profile
Item Specification Product Obtuse-Angle Unequal-Leg Copper Profile / Angled Copper Busbar Connector Material Options UNS C11000 ETP, C10200 oxygen-free copper or C10100 oxygen-free electronic copper Applicable Standards ASTM B187/B187M, EN 13605 or agreed customer specification, depending on product form and production route Cross-Section Unequal-leg angled section with thick wing, thinner angled wing and optional rounded outer edge Wing Span Indicative enquiry range: 12 × 12 mm to 180 × 180 mm Included Angle Indicative obtuse-angle range: 105°–165°; other angles subject to technical review Thick Wing Thickness Indicative range: 3–40 mm Thin Wing Thickness Indicative range: 1.5–25 mm Locating Features Optional rear shoulder, step, chamfer or radius according to drawing Cut-to-Length Blanks Indicative range: 15–1000 mm Longer Profile Bars Indicative range: 1000–6000 mm, subject to section and production route Supply Forms Profile bar, cut block, blank or further-machined component Material Condition Annealed or cold-worked condition as specified Surface Bare copper, anti-tarnish treatment or optional silver, tin or nickel plating Custom Machining Holes, slots, threads, end features, mounting faces and contact surfaces Tolerance Angle, wing thickness, flatness and locating dimensions according to the approved drawing Inspection Chemical composition, dimensions, angle geometry, surface condition and additional tests as specified Documentation Material test certificate, dimensional report and coating records available as agreed -
Double-Beveled Copper Profile with Flat Top
Item Specification Product Double-Beveled Copper Profile / Chamfered-Shoulder Copper Bar Material Options UNS C11000 ETP, C10200 oxygen-free or C10100 oxygen-free electronic copper, subject to confirmation Applicable Standards ASTM B187/B187M, EN 13605 or agreed customer specification, depending on product form and production route Cross-Section Flat top with two beveled shoulders and parallel side walls Profile Width Indicative enquiry range: 6–160 mm; subject to technical review Total Height Indicative enquiry range: 8–180 mm; subject to technical review Top Width & Bevel Geometry According to the approved drawing; symmetrical or asymmetrical designs subject to review Base Corners Chamfered or radiused as specified Cut-to-Length Blanks Indicative enquiry range: 10–800 mm Longer Profile Bars Indicative enquiry range: 1000–6000 mm; availability depends on section and production route Supply Forms Profile bar, cut block or further-machined component Material Condition Annealed or cold-worked condition, as specified Surface Options Bare copper, anti-tarnish treatment or optional silver, tin or nickel plating Custom Machining Holes, threads, slots, end features and finished contact surfaces Tolerance Width, height, bevel angle, symmetry and straightness according to the approved drawing Inspection Dimensions, bevel geometry and surface condition; hardness, conductivity or additional testing as specified Documentation Material test certificate, dimensional report and coating inspection records available as agreed -
Low-Profile Inverted T-Section Copper Profile
Item Specification Product Low-Profile Inverted T-Section Copper Profile / Busbar Blank Material Options UNS C11000 ETP, C10200 oxygen-free or C10100 oxygen-free electronic copper, subject to confirmation Applicable Standards ASTM B187/B187M, EN 13605 or agreed customer specification, depending on product form and production route Cross-Section Wide flat base with a low, flat-topped central rib and side flanges Base Width Indicative enquiry range: 8–200 mm; subject to technical review Total Height Indicative enquiry range: 4–80 mm; subject to technical review Rib Width & Base Thickness According to the approved cross-section drawing Cut-to-Length Blanks Indicative enquiry range: 20–1500 mm Longer Profile Bars Indicative enquiry range: 1000–6000 mm; availability depends on section and production route Supply Forms Profile bar, cut blank or further-machined component Material Condition Annealed or cold-worked condition, as specified Surface Bare copper; anti-tarnish treatment or silver, tin or nickel plating subject to confirmation Custom Features Centered or offset rib, holes, threads, slots, chamfers and root reliefs, subject to drawing review Tolerance Cross-section, straightness, flatness and cut-length tolerances agreed before production Inspection Dimensions, surface condition and material verification; conductivity or additional testing as specified Documentation Material test certificate and dimensional inspection reports available as agreed -
Heavy-Duty H-Section Copper Busbar Profile
Item Specification Product Custom H-Section / I-Profile Copper Busbar Material Options C11000 ETP copper, C10200 oxygen-free copper or C10100 oxygen-free electronic copper Applicable Standards ASTM B187/B187M, ASTM B152/B152M, ASTM B133, EN 13601, EN 13605, DIN 43671, JIS H3140 or agreed customer specification Cross-Section H-section or I-profile with a central web and two flanges Web Height Reference range: 25–250 mm Flange Widths Reference range: 20–200 mm per flange; symmetrical or asymmetrical designs Web / Flange Thickness Reference range: 2.5–40 mm Corner Geometry Formed radius, controlled edge or machined relief according to drawing Cut Block Length Reference range: 20–1200 mm Profile Bar Length Reference range: 1000–6000 mm, subject to section size and handling requirements Material Condition Hard-worked or annealed condition as specified Surface Bare copper, cleaned copper or anti-tarnish treated surface Plating / Coating Silver, tin, nickel or other agreed surface treatment; subject to confirmation Custom Machining Flange holes, web holes, threads, slots, chamfers and mounting features Tolerance According to the approved drawing and manufacturing feasibility review Inspection Chemical composition, conductivity, dimensions, flange parallelism, web alignment, straightness and surface condition Documentation Material test certificate, dimensional report and process records as agreed -
Custom L-Section Copper Conductive Block
Item Specification Product Custom L-Section Copper Conductive Block Material Options C11000 ETP copper, C10200 oxygen-free copper or C10100 oxygen-free electronic copper Applicable Standards ASTM B187/B187M, ASTM B152/B152M, EN 13605, EN 13601 or agreed customer specification Cross-Section Right-angle L-section; equal or unequal leg design Leg Widths Reference range: 10 × 10 mm to 200 × 200 mm Wall Thickness Reference range: 2–50 mm; equal or unequal thickness available for review Corner Geometry Square corner, controlled radius or relief groove according to drawing Cut Block Length Reference range: 15–1000 mm Profile Bar Length Reference range: 1000–6000 mm, subject to section size and handling requirements Material Condition Annealed, cold-worked or other agreed temper Surface Bare copper, cleaned copper or anti-tarnish treated surface Plating Options Silver, tin or nickel plating, subject to application and dimensional review Custom Machining Drilling, tapping, slots, chamfers, grooves and root finishing Tolerance According to the approved drawing and manufacturing feasibility review Inspection Chemical composition, conductivity, dimensions, angle, corner geometry, straightness and surface condition Documentation Material test certificate, dimensional report and process records as agreed -
Custom Asymmetric B-Section Copper Profile
Item Specification Product Custom Asymmetric B-Section Copper Profile Material Options C11000 ETP copper, C10200 oxygen-free copper or C10100 oxygen-free electronic copper Applicable Standards ASTM B187/B187M, ASTM B152/B152M, EN 13605, EN 13601 or agreed customer specification Cross-Section Asymmetric B-type profile with a thick body and extended connection section Overall Profile Span Reference range: 15–240 mm Main Body Thickness Reference range: 10–120 mm Extended Wing Thickness Reference range: 2–35 mm Contour Features Rounded shoulder, clearance bevel, internal step or flat connection wing according to drawing Cut Block Length Reference range: 15–800 mm Profile Bar Length Reference range: 1000–6000 mm, subject to section size and handling requirements Material Condition Annealed, cold-worked or other agreed temper Surface Bare copper, cleaned copper, anti-tarnish treated or plated surface Plating Options Silver, tin or nickel plating, subject to application and dimensional review Custom Machining Holes, threads, slots, chamfers, grooves and finished contact surfaces Tolerance According to the approved drawing and manufacturing feasibility review Inspection Chemical composition, conductivity, dimensions, profile geometry, straightness, surface condition and additional tests as specified Documentation Material test certificate, dimensional report and heat-treatment or process records as agreed -
Custom Rounded-Top T-Section Copper Busbar
Item Specification Product Custom Rounded-Top T-Section Copper Busbar Material Options UNS C11000 ETP copper, C10200 oxygen-free copper or C10100 oxygen-free electronic copper, subject to confirmation Applicable Standards ASTM B187/B187M, EN 13605 or agreed customer specification, depending on product form and manufacturing route Cross-Section Inverted T-section with a horizontal base flange and an upright web Base Flange Width Reference range: 15–220 mm Overall Height Reference range: 15–200 mm Flange / Web Thickness Reference range: 2–40 mm; dimensions specified separately Top Edge Rounded top; radius or alternative edge geometry according to drawing Cut Segment Length Reference range: 20–1000 mm Profile Bar Length Reference range: 1000–6000 mm; subject to section and handling requirements Supply Forms Profile bar, saw-cut blank or further-machined component Material Condition Annealed or cold-worked condition as specified Surface Options Bare copper, anti-tarnish treatment or silver, tin or nickel plating, subject to confirmation Custom Machining Mounting holes, threads, slots, chamfers and finished functional faces Tolerances According to the approved drawing and manufacturing feasibility review Inspection Section dimensions, straightness, perpendicularity and surface condition; conductivity, hardness or additional testing as specified Documentation Material test certificates, dimensional reports and process records as agreed -
Custom Stepped L-Shaped Copper Conductor Block
Item Specification Product Custom Stepped L-Shaped Copper Conductor Block Material Options C11000 ETP copper, C10200 oxygen-free copper or C10100 oxygen-free electronic copper, subject to order confirmation Applicable Standards ASTM B187/B187M, EN 13605 or an agreed customer specification, depending on product form and manufacturing route Cross-Section L-shaped outer section with multiple progressive internal steps Base Width Reference range: 12–220 mm Overall Height Reference range: 12–200 mm Step Configuration Number of steps, step widths and step heights according to the approved drawing Section Thickness Back-wall and base thicknesses specified by drawing Corner Geometry Internal fillets, external radii and chamfers subject to manufacturing review Length Reference cut-block lengths: 15–800 mm; longer profiles of 1000–6000 mm subject to review Supply Forms Profile bars, cut-to-length blanks or machined components Material Condition Annealed or cold-worked condition as specified Surface Bare copper; anti-tarnish treatment or silver, tin or nickel plating subject to specification Custom Machining Holes, threads, slots, pockets, mounting features and finished contact faces Tolerance According to the approved drawing, datum system and agreed inspection criteria Inspection Step dimensions, perpendicularity, parallelism, straightness and surface condition; material-property testing as specified Documentation Material certificates, dimensional reports and processing records as agreed -
Custom Rounded-Edge Stepped Copper Busbar
Item Specification Product Custom Rounded-Edge Stepped Copper Busbar Material Options C11000 ETP copper; C10200 or C10100 oxygen-free copper, subject to order confirmation Applicable Standards ASTM B187/B187M, EN 13605 or an agreed customer specification, depending on product form and manufacturing route Cross-Section Thick rounded-edge section with a thinner flat extension and one longitudinal step Overall Width Reference range: 10–260 mm Thick Section Reference thickness: 2–40 mm Thin Section Reference thickness: 0.8–25 mm; selected in relation to the thick section Edge Geometry Rounded or full-radius edge as defined by the approved drawing Length Reference cut lengths: 15–1000 mm; longer bars of 1000–6000 mm subject to review Supply Forms Cut pieces or straight profiles; coil supply subject to section geometry and temper Material Condition Annealed or cold-worked condition as specified Surface Bare copper; anti-tarnish treatment or silver, tin or nickel plating subject to specification Secondary Processing Cutting, drilling, punching, slots, chamfers and local machining Tolerance According to the approved drawing, manufacturing route and inspection agreement Inspection Profile dimensions, edge radius, step height, straightness and surface condition; conductivity and hardness testing as specified Documentation Material certificates, dimensional reports and processing records as agreed -
Custom Offset-Groove Stepped Copper Busbar
Item Specification Product Offset-Groove Stepped Copper Busbar / Asymmetric Copper Profile Material Options C11000, C10200 or C10100; confirm grade and specification for the order Applicable Standards ASTM B187/B187M or EN 13605 where applicable to the supplied product form; customer specification may also be reviewed Overall Width Indicative range: 15–300 mm; confirm by drawing Total Thickness Indicative range: 3–60 mm; confirm by drawing Groove / Step Geometry Wide shallow offset groove and asymmetric step features; final dimensions per approved drawing Optional Root Relief Can be evaluated if required by the mating design Supply Length Indicative cut lengths: 20–1000 mm; longer bars may be reviewed up to 1000–6000 mm Material Condition To be specified for the selected grade and applicable standard Surface Finish As supplied or machined; optional plating or protective treatment subject to specification Additional Processing Cutting, drilling, tapping and drawing-defined machining Tolerance Step height, groove position, flatness and other critical dimensions according to approved drawing Inspection Material, dimensional, surface and electrical checks as agreed Documentation Material certificate and inspection records as agreed for the order