Products
-
High-Current Solid Copper Conductive Rod with Multi-Stage Ribs
Item Specification Product Solid Copper Conductive Rod / Multi-Stage Ribbed Terminal Post Material Options C11000 ETP copper, C10200 oxygen-free copper or C10100 oxygen-free electronic copper; grade and condition as specified Optional Alloy Review C18150 chromium-zirconium copper or C14500 tellurium copper may be reviewed where strength, softening resistance or machinability is required; these are separate alloys, not automatic equivalents to pure copper Applicable Standards ASTM B187/B187M, ASTM B133 or ASTM B124 for applicable feedstock or product forms; EN 13601, JIS H3250, GB/T 4423 or other standards by agreement. Finished component to approved drawing Outer Diameter 15–250 mm indicative range; stepped diameters and rib crests subject to drawing review Overall Length 30–600 mm indicative range Rib / Groove Geometry Conical retention ribs, cooling-style grooves, trapezoidal grooves or seal grooves as specified; function and profile must be defined by the application drawing End Features Flat end face, flange, counterbore, internal thread or axial hole as specified Construction One-piece turned component from agreed bar or other approved blank; forging or casting route requires separate process and material review Dimensional Tolerance Drawing-defined diameter, groove spacing, coaxiality, parallelism and flatness; no blanket ±0.015 mm or ±0.03 mm tolerance is assumed Surface Finish Turned, deburred and cleaned; optional local or full surface preparation for a specified casting or bonding interface Plating Options Optional selective or full silver, tin or nickel plating; coating thickness, masking and finished dimensions agreed before production Inspection Material verification, profile dimensions, rib and groove spacing, end features, surface condition and optional conductivity, coating-thickness, fit or internal-soundness checks Documentation Material test certificate, dimensional report and coating or surface-treatment records as specified; additional certification subject to order confirmation -
CNC-Machined Copper Cylindrical Terminal Socket with Mounting Lug
Item Specification Product Copper Cylindrical Terminal Socket / Conductive Sleeve with Mounting Lug Material Options C11000 ETP copper, C10200 oxygen-free copper or C10100 oxygen-free electronic copper; grade and condition as specified Optional Alloy Review C18150 or C17200 may be reviewed where higher strength or softening resistance is required; these are separate alloys, not automatic equivalents to pure copper Applicable Standards ASTM B187/B187M for applicable bar feedstock or ASTM B152/B152M for applicable plate feedstock; EN 13601, JIS H3250, GB/T 5231 or other standards by agreement. Finished component to approved drawing Barrel Outer Diameter 12–200 mm indicative range; custom dimensions subject to drawing review Bore / Inner Diameter 6–160 mm indicative range; bore size, depth and fit to drawing Overall Height 25–350 mm indicative range Mounting Lug / Flange Thickness 4–40 mm indicative range; local sections and transition radii to drawing Mounting Geometry Offset lug, integral flange or circular base with through, counterbored or threaded hole as specified Construction One-piece machined socket from agreed bar, plate or other approved blank; forged or cast route requires separate process review Bore and Face Tolerance Drawing-defined dimensional, positional, perpendicularity and flatness tolerances; no blanket H7 or ±0.02 mm tolerance is assumed Surface Finish Machined, deburred and cleaned; bare copper with optional anti-tarnish treatment where specified Plating Options Optional selective or full silver, tin or nickel plating; coating thickness, masking and finished dimensions agreed before production Inspection Material verification, bore and outer dimensions, mounting-face geometry, hole position, surface condition and optional conductivity, coating-thickness or fit checks Documentation Material test certificate, dimensional report and coating records as specified; additional certification subject to order confirmation -
Copper Saddle Clamp for Tubular Busbars
Item Specification Product Copper Saddle Clamp / Semi-Circular Conductive Half-Shell Material Options C11000 ETP copper, C10200 oxygen-free copper or C10100 oxygen-free electronic copper; grade and condition as specified Applicable Standards ASTM B152/B152M for applicable plate or ASTM B187/B187M for applicable bar feedstock; forging and casting specifications agreed separately. Finished component to approved drawing Inner Arc / Mating Diameter 20–350 mm indicative range; arc radius, coverage and conductor fit to drawing Length 40–450 mm indicative range; custom lengths subject to review Wall Thickness 10–80 mm indicative range; local sections and connection features to drawing Supply Scope Individual half-shell; matching halves, fasteners and complete assembly scope confirmed separately Connection Features Circular boss with central hole or flat connection face with custom hole pattern; geometry to drawing Processing CNC boring, milling and drilling from an agreed blank; forging or casting route subject to material and process approval Critical Geometry Inner arc profile, contact-face flatness, face alignment and hole position according to approved drawing Surface and Plating Machined, deburred and cleaned; optional selective or full silver or tin plating to agreed specification Inspection Material verification, arc dimensions, wall thickness, connection faces, holes and surface condition; conductivity, fit, coating and internal-soundness checks as agreed Documentation Material test certificate, dimensional report and coating records as specified; additional certification subject to order confirmation -
Copper Corona Shield Cup for High-Voltage Switchgear
Item Specification Product Copper Corona Shield Cup / Electric Field Grading Bell Material Options C11000 ETP copper, C10200 oxygen-free copper or C10100 oxygen-free electronic copper; grade and condition as specified Applicable Standards ASTM B152/B152M for sheet/plate or ASTM B187/B187M for bar feedstock, where applicable; forging specifications agreed separately. Finished component acceptance to approved drawing Outer Diameter 40–500 mm indicative range; subject to technical review Overall Height 25–300 mm indicative range Wall Thickness 2–25 mm indicative range; variable sections subject to geometry review Internal Geometry Stepped cavity, central opening and drawing-defined locating features Manufacturing Options CNC turning from wrought or forged blanks; spinning or deep drawing with finish machining subject to design review Critical Requirements Edge radii, wall thickness, concentricity, face runout and surface roughness to approved drawing Surface Options Machined, deburred and cleaned; polishing or anti-tarnish treatment as specified Plating Options Silver, tin or nickel plating subject to order confirmation; thickness, masking and finished dimensions agreed before production Inspection Material verification, dimensions, profile, concentricity, runout and surface condition; conductivity, roughness and coating checks as agreed Documentation Material test certificate, dimensional report and coating records as specified; additional certification subject to order confirmation -
Copper Rectangular Conductive Frame for Switchgear
Item Specification Product Copper Rectangular Conductive Frame / Busbar Connection Bracket Material Options C11000 ETP copper, C10200 oxygen-free copper or C10100 oxygen-free electronic copper; grade and condition as specified Applicable Standards ASTM B152/B152M for plate or ASTM B187/B187M for bar feedstock, where applicable; forging specifications agreed separately. Finished component acceptance to approved drawing Overall Dimensions 50 × 50 × 30 mm to 500 × 400 × 250 mm (L × W × H), indicative range; subject to drawing review Wall Thickness 6–50 mm indicative range; local wall sections and remaining material around holes to drawing Central Opening Rectangular through-window with radiused internal corners; opening dimensions and corner radii customized Connection Features Threaded holes on selected walls, upper mounting pads and an end-face central opening with surrounding holes; arrangement to drawing Processing CNC milling, drilling, tapping and deburring from an agreed bar, plate or forged blank Critical Geometry Contact-face flatness, wall parallelism and perpendicularity, hole position and mating clearances as specified Surface Options Machined, deburred and cleaned; optional anti-tarnish treatment Plating Options Optional full or selective silver, tin or nickel plating; thickness, masking and finished dimensions agreed before production Inspection Material verification, window dimensions, wall thickness, contact faces, hole locations, threads and surface condition; conductivity, roughness and internal-soundness checks as agreed Documentation Material test certificate, dimensional report and coating records as specified; additional certification subject to order confirmation -
Copper VCB Terminal Housing with Rectangular Window
Item Specification Product Copper VCB Terminal Housing / Rectangular-Window Conductive Bracket Material Options C11000 (ETP), C10200 (oxygen-free) or C10100 (oxygen-free electronic copper) for wrought-material routes; grade and condition as specified Applicable Standards ASTM B187/B187M for bar or ASTM B152/B152M for plate feedstock, where applicable; forging or casting specifications agreed separately. Finished component acceptance to the approved drawing Blank and Processing Route CNC finishing of an agreed wrought or forged copper blank; casting alternatives require separate grade and process approval Overall Length 80–450 mm indicative range; subject to drawing review Ring Outer Diameter 60–350 mm indicative range Body Thickness 30–180 mm indicative range; local wall thickness and boss dimensions defined by drawing Central Window Rounded rectangular through-window; opening size, corner radius and clearance to drawing Mounting Features Circular hole array on one ring face, end-face hole pattern and radial threaded features; layout and thread details to drawing Critical Geometry Stepped-face dimensions, flatness, boss-face orientation, hole position and contact-surface roughness confirmed by feature review Surface Options Machined and deburred; exterior texture, cleaning and anti-tarnish treatment as specified Plating Options Optional full or selective silver, tin or nickel plating; thickness, masking and finished dimensions agreed before production Inspection Material verification, window geometry, step dimensions, face alignment, hole locations, threads and surface condition; conductivity, internal-soundness and coating checks as agreed Documentation Material test certificate, dimensional report and coating records as specified; EN 10204 Type 3.1 documentation subject to order confirmation -
Brazed Copper Contact Cup for Circuit Breakers and Disconnectors
Item Specification Product Brazed Copper Contact Cup / Cup-and-Stem Conductive Assembly Material Options C11000 (ETP), C10200 (oxygen-free) or C10100 (oxygen-free electronic copper), subject to grade and brazing-process review Applicable Standards ASTM B187/B187M for bar or ASTM B152/B152M for plate, where applicable to the selected feedstock; finished assembly to the approved drawing and joint specification Production Route Separate cup and stem machining, brazing, post-braze finishing and cleaning Cup Outer Diameter 25–250 mm; subject to drawing review Cup Inner Diameter 15–220 mm; wall thickness matched to the selected outer diameter Cup Cavity Depth 20–200 mm; subject to tooling access and geometry review Stem Diameter / Length 8–80 mm diameter; 30–500 mm length, subject to design review Custom Features Circumferential grooves, internal or external stem threads, shoulders and mating interfaces to drawing Brazed Joint Joint geometry, filler metal, heating method, thermal cycle and acceptance criteria agreed for the application Tolerance and Roughness Cup bore, stem alignment, runout, thread fits and contact-face finish specified by feature; acceptance stage defined before or after plating Surface Options Machined and cleaned; optional anti-tarnish treatment or selective/full silver, tin or nickel plating, subject to technical review Inspection Material verification, dimensions, alignment, threads, surface condition and joint inspection; resistance, mechanical and nondestructive testing as agreed Documentation Material test certificate, dimensional report, brazing process records and coating reports available as specified -
Triangular Copper Connection Bracket for High-Current Assemblies
Item Specification Product Triangular Copper Connection Bracket / U-Slot Conductive Block Material Options C11000 (ETP), C10200 (oxygen-free) or C10100 (oxygen-free electronic copper), as specified Applicable Standards ASTM B152/B152M or ASTM B187/B187M where applicable to plate/bar feedstock; forging specifications agreed for the selected grade and route. Finished component acceptance to the approved drawing Production Route One-piece body CNC-machined from plate, bar or a forged blank, as agreed Overall Length × Width 50 × 50 mm to 500 × 500 mm indicative range; subject to drawing review Overall Thickness / Height 20–200 mm indicative range; local web thickness and boss heights defined separately by drawing Bore Diameter 8–150 mm indicative range; each bore size subject to boss diameter and minimum wall requirements Mounting Layout Three corner bosses and a central bore; hole spacing, orientation and contact interfaces to drawing U-Slot Geometry Opening width, depth, root radius and adjacent wall thickness to the approved mating-part design Tolerance and Roughness Hole position, bore fits, face flatness, slot parallelism and surface roughness confirmed by feature and process review Surface Finish Machined and deburred; cleaning and optional anti-tarnish treatment as specified Plating Options Optional full or selective silver, tin or nickel plating; coverage, thickness and finished dimensions agreed before production Inspection Material verification, hole pattern, slot geometry, contact faces and surface condition; conductivity, roughness, ultrasonic and coating checks as agreed Documentation Material test certificate, dimensional report and coating records as specified; EN 10204 Type 3.1 documentation subject to order confirmation -
Copper Stationary Terminal Flange for Vacuum Circuit Breakers
Item Specification Product Copper Stationary Terminal Flange / Contact Mounting Base Material Options C11000 (ETP), C10200 (oxygen-free) or C10100 (oxygen-free electronic copper), as specified Applicable Standards ASTM B187/B187M where applicable to bar feedstock; forging specifications agreed for the selected grade and route. Finished component acceptance to the approved drawing Production Route CNC machining from copper bar or a forged blank, subject to technical review Outer Flange Diameter 40–350 mm indicative range; subject to drawing review Overall Height 20–200 mm indicative range; subject to geometry and process review Mounting Features Raised mounting face, central locating recess and threaded holes; dimensions and hole pattern to drawing Peripheral Geometry Rounded outer rim and annular relief groove; radii, clearances and profile to drawing Tolerance and Roughness Fits, face runout, alignment, flatness and surface roughness according to the approved drawing and feasibility review Surface Finish Machined and cleaned; anti-tarnish treatment where specified Plating Options Optional silver, tin or nickel plating; coverage, thickness and finished dimensions agreed before production Inspection Material verification, dimensions, threads and surface condition; conductivity, roughness, ultrasonic and coating checks as agreed Documentation Material test certificate, dimensional report and coating records as specified; EN 10204 Type 3.1 documentation subject to order confirmation -
Copper T-Shaped Conductor Connector for Switchgear
Item Specification Product Copper T-Shaped Conductor Connector / Contact Housing Tee Material Options C11000 (ETP), C10200 (oxygen-free) or C10100 (oxygen-free electronic copper), as specified Applicable Standards ASTM B152/B152M or ASTM B187/B187M where applicable to plate/bar feedstock; forging specifications agreed for the selected grade and route. Finished component acceptance to the approved drawing Production Route Forging followed by CNC finishing where suitable; alternative blank routes by technical agreement Overall Length 60–500 mm indicative range; subject to drawing review Branch Height 50–400 mm indicative range; measurement datums defined by drawing Main Body Outer Diameter 30–250 mm indicative range Internal Bore Diameter 15–200 mm indicative range; wall thickness and groove geometry subject to review Contact and Mounting Features Stepped bores, internal contact grooves, machined end faces, mounting holes and threads to drawing Tolerance Bore fits, coaxiality, face orientation and surface roughness according to the approved drawing and process review Surface Finish Machined functional surfaces; external texture, cleaning and anti-tarnish treatment as specified Plating Options Optional full or selective silver, tin or nickel plating; coverage, thickness and acceptance criteria agreed before production Inspection Material verification, bore/groove dimensions, alignment, mounting faces, threads and surface condition; conductivity, internal-soundness and coating tests as agreed Documentation MTC, dimensional reports and coating records as specified; EN 10204 Type 3.1 documentation subject to order confirmation -
Custom Copper Saddle Terminal Block
Item Specification Product Copper Saddle Terminal Block / Conductor Support Base Material Options C11000 (ETP), C10200 (oxygen-free) or C10100 (oxygen-free electronic copper), as specified Applicable Standards ASTM B152/B152M or ASTM B187/B187M for applicable plate or bar feedstock; other specifications by agreement. Finished component acceptance to the approved drawing Block Dimensions 30 × 30 × 20 mm to 600 × 400 × 250 mm indicative custom envelope; subject to drawing and process review Saddle Diameter 10–300 mm indicative range; saddle radius, depth and mating fit defined by drawing Construction Single-piece machined copper body Machining Features Saddle recesses, central openings, mounting faces, holes, threads, steps and chamfers Thread Options Metric M4–M24; UNC, UNF or BSP where specified and technically feasible Contact Surfaces Flatness, roughness and contact area according to the approved drawing Tolerance Drawing-defined dimensional and geometric tolerances; critical features reviewed individually Surface Finish Machined and deburred; additional cleaning or surface treatment as specified Plating Options Optional silver, tin or nickel plating; coverage, thickness and acceptance criteria agreed before production Inspection Material verification, dimensions, threads and surface condition; conductivity, coating thickness and ultrasonic testing as agreed Documentation MTC, dimensional reports and coating records as specified; EN 10204 Type 3.1 documentation subject to order confirmation -
Custom Pure Copper Tulip Contact
Item Specification Product Pure Copper Tulip Contact / Slotted Finger Contact Socket Material Options C11000 (ETP), C10200 (oxygen-free) or C10100 (oxygen-free electronic copper), as specified Applicable Standards ASTM B187/B187M for applicable bar feedstock; other material standards according to grade and source form. Finished component acceptance to the approved drawing Outer Diameter 15–350 mm indicative custom range; subject to drawing review Inner Diameter 8–300 mm indicative custom range; subject to wall thickness and geometry Length / Height 20–400 mm indicative custom range Axial Slots 0.5–4.0 mm slot width; 6–36 fingers, subject to geometry and process review Construction One-piece machined copper body with axial slots Mounting Features Internal threads, flanges, holes and annular grooves according to drawing Contact Pressure Finger geometry, mating fit and any external spring system to be specified together Tolerance According to the approved drawing; critical bore, runout and slot requirements reviewed individually Surface Finish Machined and deburred; contact-surface roughness according to drawing Plating Options Silver, tin or nickel by agreement; coating thickness and applicable standard specified in the order Supply Scope Contact body; springs, mating contacts and assembly requirements confirmed separately Inspection Material verification, dimensions, slot condition and surface inspection; conductivity and coating checks as specified Documentation MTC, dimensional report and coating records as agreed; EN 10204 Type 3.1 documentation subject to order confirmation