Obtuse-Angle Unequal-Leg Copper Profile

Short Description:

Item Specification
Product Obtuse-Angle Unequal-Leg Copper Profile / Angled Copper Busbar Connector
Material Options UNS C11000 ETP, C10200 oxygen-free copper or C10100 oxygen-free electronic copper
Applicable Standards ASTM B187/B187M, EN 13605 or agreed customer specification, depending on product form and production route
Cross-Section Unequal-leg angled section with thick wing, thinner angled wing and optional rounded outer edge
Wing Span Indicative enquiry range: 12 × 12 mm to 180 × 180 mm
Included Angle Indicative obtuse-angle range: 105°–165°; other angles subject to technical review
Thick Wing Thickness Indicative range: 3–40 mm
Thin Wing Thickness Indicative range: 1.5–25 mm
Locating Features Optional rear shoulder, step, chamfer or radius according to drawing
Cut-to-Length Blanks Indicative range: 15–1000 mm
Longer Profile Bars Indicative range: 1000–6000 mm, subject to section and production route
Supply Forms Profile bar, cut block, blank or further-machined component
Material Condition Annealed or cold-worked condition as specified
Surface Bare copper, anti-tarnish treatment or optional silver, tin or nickel plating
Custom Machining Holes, slots, threads, end features, mounting faces and contact surfaces
Tolerance Angle, wing thickness, flatness and locating dimensions according to the approved drawing
Inspection Chemical composition, dimensions, angle geometry, surface condition and additional tests as specified
Documentation Material test certificate, dimensional report and coating records available as agreed

Product Detail

Product Tags

Video

Short Description

Custom obtuse-angle copper profile featuring unequal legs, a broad thick wing and a thinner angled wing. The profile may include a rounded outer edge or locating shoulder according to the approved drawing and can be supplied as long bars, cut blanks or further-machined copper components.

Product Overview

This obtuse-angle copper profile is designed with an unequal-leg cross-section: one wider or thicker wing is connected to a thinner angled wing. The geometry can also include a rounded outer edge, rear locating shoulder or other custom features.

The profile is suitable for drawing-based electrical components where a non-90° conductive path, guided insertion surface or compact transition geometry is required. It belongs to Cymber Metal’s pure copper products range.

C11000, C10200 and C10100 copper may be considered depending on conductivity, forming, joining and operating requirements. Final material grade, angle, thickness, finish and inspection scope are confirmed by drawing and order specification.

Key Features

  • Unequal-leg geometry: A thick wing and thinner angled wing can be designed for space-limited assemblies.
  • Obtuse-angle configuration: The included angle can be adapted to the required conductor route or mating structure.
  • Rounded outer edge option: A radius or bullnose edge can be included where required by the drawing.
  • Optional locating shoulder: Rear steps, chamfers and locating surfaces can be incorporated into the profile.
  • Flexible supply: Available for evaluation as long profile stock, cut blanks or machined components.
  • Application-specific materials: Copper grade and condition are selected according to electrical and mechanical requirements.

Manufacturing & Quality Control

Stage Scope
Drawing Review Confirm wing dimensions, included angle, thickness difference, edge radius and locating features
Material Selection Confirm copper grade, temper, standard and certificate requirements
Profile Production Review custom copper profile extrusion, drawing or machining according to geometry and order quantity
Cutting & Machining Cut-to-length preparation, drilling, tapping and functional-face finishing through agreed copper machining support
Surface Treatment Confirm silver, tin or nickel plating, masking, coverage and finished dimensions where applicable
Final Inspection Check agreed dimensions, angle, edge geometry, surface condition and additional test requirements
Packaging Protect the copper profile, corners and finished surfaces during storage and international shipment

Inspection methods, sampling plans and acceptance criteria are confirmed before production. More information is available on the Quality Assurance page.

Typical Applications

Application Potential Use
Circuit Breaker Components Angled conductive blanks for customer-designed stationary contact or transition assemblies
Arc-Runner Assemblies Profile blanks for equipment-specific angled conductor or arc-management components
Switchgear Transitions Non-90° crossover or connection sections inside compact electrical equipment
Busway Components Angled conductive profiles for guided or space-constrained transitions
EV and Converter Systems Custom copper conductor sections subject to thermal and electrical design review
Industrial Electrical Equipment Machined copper blocks, connectors and mounting conductors made to drawing

These are potential applications only. Electrical rating, thermal performance, mechanical retention and equipment compatibility require assembly-level review.

FAQ

What is an obtuse-angle copper profile?

An obtuse-angle copper profile is a non-90° copper section formed with two unequal legs or wings. One wing may be thicker or wider than the other, and the profile can include a rounded edge or locating shoulder.

Which copper grades can be used?

C11000 ETP, C10200 oxygen-free copper and C10100 oxygen-free electronic copper may be considered. The final grade depends on conductivity, forming, joining, operating temperature and the required material standard.

Can the two wings have different thicknesses?

Yes. Unequal wing thickness is one of the main design features of this profile. The thick and thin sections, included angle and transition geometry should be defined on the approved drawing.

Can the included angle be customized?

Yes. The angle can be reviewed according to the required conductor route or mating component. Please specify the target angle, angle tolerance and any required locating or contact surfaces.

Can the profile include a rounded or bullnose edge?

A rounded outer edge, chamfer or radius can be considered where required by the application. The radius should be shown on the drawing because it affects tooling, machining and final dimensional inspection.

Is the profile extruded, drawn or machined?

The production route depends on the section size, quantity, tolerance and material condition. Extrusion, drawing, straightening, cutting and secondary machining may be combined after technical review.

What current rating does this copper profile have?

No universal current rating can be assigned from the profile shape alone. The rating depends on copper grade, cross-sectional area, contact resistance, cooling, insulation and permitted temperature rise in the complete assembly.

Can silver or tin plating be added?

Yes, silver, tin or nickel plating can be reviewed according to the application. Please provide the required coating, thickness, coverage, masking and inspection requirements before quotation.

Request a Quote

Please provide the cross-section drawing or CAD file, copper grade, included angle, wing dimensions, required lengths and quantity.

Also specify:

  • Critical dimensional and angle tolerances
  • Material condition
  • Holes, slots, threads or locating features
  • Surface treatment or plating requirements
  • Conductivity or mechanical property requirements
  • Inspection and documentation needs
  • Destination country and required delivery schedule

Contact Cymber Metal for a quotation and a drawing-based feasibility review.


  • Previous:
  • Next:

  • Write your message here and send it to us