Low-Profile Inverted T-Section Copper Profile
Video
Short Description
Custom inverted T-section copper profile featuring a wide flat base and a low, flat-topped central rib. Available as profile bars, cut-to-length blanks or further-machined components, with copper grade, dimensions, surface condition and inspection requirements specified to the approved drawing.
Product Overview
This inverted T-section copper profile combines a broad base with a low central raised rib, creating side ledges on both sides of the section. The geometry can be evaluated for conductor positioning, recessed installation or external clamping within a customer-designed assembly.
Part of our pure copper products range, this profile can be specified in C11000, C10200 or C10100 copper, subject to material and production confirmation. Electrical performance, mechanical fit and installation suitability depend on the selected grade, finished dimensions and operating conditions.
Key Features
- Low-profile geometry: A shallow central rib provides a defined locating feature without a tall T-section.
- Wide base flanges: Side ledges can be evaluated for mating slots, supports or external clamps.
- Drawing-based customization: Rib position, flange dimensions and corner details can be reviewed for the intended assembly.
- Flexible supply forms: Specify longer profile stock, cut blanks or machined components.
- Application-specific material selection: Copper grade and condition are selected around conductivity, forming and mechanical requirements.
Manufacturing & Quality Control
| Stage | Scope |
|---|---|
| Drawing Review | Confirm cross-section, root radii, mating clearances, tolerances and machining allowances |
| Material Selection | Confirm copper grade, condition and certification requirements |
| Profile Forming | Assess the feasibility of custom copper profile extrusion, with subsequent drawing or machining where appropriate |
| Cutting & Machining | Cut-to-length preparation, drilling, threading and functional-face finishing through agreed copper machining support |
| Final Inspection | Check agreed dimensions and surface requirements; conduct additional tests where specified |
| Packaging | Select protective packaging appropriate to the profile geometry and shipping conditions |
Inspection methods, sampling plans and acceptance criteria are agreed before production. Visit our Quality Assurance page for further information.
Typical Applications
| Application | Potential Use |
|---|---|
| Guided Conductor Assemblies | Profile blanks for systems requiring a raised locating rib |
| Switchgear Components | Custom conductors or connection blanks designed around specific mounting arrangements |
| Recessed Busbar Installations | Stepped profiles for mating channels or constrained installation spaces |
| Busway Transition Components | Custom sections combining conductor geometry with positioning features |
| Clamped Electrical Assemblies | Flanged blanks evaluated for externally clamped installation |
| Motor & Generator Components | Equipment-specific conductor blanks, subject to mechanical, thermal and OEM review |
These are potential applications, not equipment approvals or assigned electrical ratings.
FAQ
It is a copper section with a wide base and a lower-width raised rib. Viewed from the end, the base extends to both sides of the rib, forming an inverted T-shaped cross-section.
C11000 ETP, C10200 oxygen-free and C10100 oxygen-free electronic copper may be considered. Grade selection depends on conductivity, joining requirements, service conditions and material availability.
The production route is determined after reviewing the cross-section, tolerances, quantity and material condition. Extrusion, subsequent drawing and machining may be combined where appropriate.
They may be evaluated for slot retention or external clamping. Whether drilled holes can be avoided depends on the mating parts, contact design, mechanical loads and assembly requirements.
There is no universal current rating. It depends on the net copper area, material conductivity, contact resistance, cooling, insulation and permitted temperature rise in the finished assembly.
Tolerances are agreed by feature and production route. Please identify critical rib dimensions, flange thickness, straightness, flatness and mating clearances on the drawing.
Potential rotor use requires equipment-specific engineering review. Speed, centrifugal loading, fatigue, temperature, fit and joining methods must be assessed; profile stock alone is not an approved rotor component.
Provide a dimensioned drawing, copper grade, quantity, supply form and inspection requirements. Material certificates, dimensional reports and additional test records can be included in the agreed order scope.
Request a Quote
Please provide your cross-section drawing or CAD file, copper grade, required lengths, quantity and critical tolerances. Include machining, surface treatment and inspection requirements, together with the intended operating conditions where relevant.
Request a quotation from Cymber Metal for a drawing-based feasibility review and quotation.










