High-Current Solid Copper Conductive Rod with Multi-Stage Ribs

Short Description:

Item Specification
Product Solid Copper Conductive Rod / Multi-Stage Ribbed Terminal Post
Material Options C11000 ETP copper, C10200 oxygen-free copper or C10100 oxygen-free electronic copper; grade and condition as specified
Optional Alloy Review C18150 chromium-zirconium copper or C14500 tellurium copper may be reviewed where strength, softening resistance or machinability is required; these are separate alloys, not automatic equivalents to pure copper
Applicable Standards ASTM B187/B187M, ASTM B133 or ASTM B124 for applicable feedstock or product forms; EN 13601, JIS H3250, GB/T 4423 or other standards by agreement. Finished component to approved drawing
Outer Diameter 15–250 mm indicative range; stepped diameters and rib crests subject to drawing review
Overall Length 30–600 mm indicative range
Rib / Groove Geometry Conical retention ribs, cooling-style grooves, trapezoidal grooves or seal grooves as specified; function and profile must be defined by the application drawing
End Features Flat end face, flange, counterbore, internal thread or axial hole as specified
Construction One-piece turned component from agreed bar or other approved blank; forging or casting route requires separate process and material review
Dimensional Tolerance Drawing-defined diameter, groove spacing, coaxiality, parallelism and flatness; no blanket ±0.015 mm or ±0.03 mm tolerance is assumed
Surface Finish Turned, deburred and cleaned; optional local or full surface preparation for a specified casting or bonding interface
Plating Options Optional selective or full silver, tin or nickel plating; coating thickness, masking and finished dimensions agreed before production
Inspection Material verification, profile dimensions, rib and groove spacing, end features, surface condition and optional conductivity, coating-thickness, fit or internal-soundness checks
Documentation Material test certificate, dimensional report and coating or surface-treatment records as specified; additional certification subject to order confirmation

Product Detail

Product Tags

Video

Short Description

Cymber Metal supplies custom solid copper conductive rods with stepped diameters, annular ribs and drawing-defined end features. These high-current conductive posts are machined from specified pure copper or an agreed copper alloy for conductor, contact and cast-in terminal applications.

Outer diameter, length, rib profile, groove spacing, end-face geometry and surface treatment are produced to approved drawings. Bare copper, locally prepared surfaces, silver plating or tin plating can be reviewed for the intended switchgear, transformer, bushing or industrial power assembly.

Key Features

  • Solid one-piece copper body for a continuous drawing-defined conductive path.
  • Multi-stage diameters and annular ribs for specified retention, spacing or interface functions.
  • CNC-turned end faces, flanges, counterbores or threads according to the approved drawing.
  • C11000, C10200 and C10100 copper options, with separate alloy review for higher strength or elevated-temperature requirements.
  • Optional surface preparation, anti-tarnish treatment, silver plating, tin plating or nickel plating.

Manufacturing & Quality Control

Stage Scope
Drawing and Application Review Confirm conductor path, mating parts, rib function, epoxy or mechanical interface, end features and critical datums
Material and Blank Selection Agree grade, condition and suitable copper bar or other approved blank; any cast or forged route requires a separate specification
CNC Turning and Grooving Use CNC machining support for stepped diameters, ribs, grooves, end faces and optional holes or threads; tooling and setup are selected for the approved geometry
Surface Preparation and Plating Deburr, clean and protect bare copper; apply specified roughening, silver, tin or nickel treatment with defined coverage and acceptance criteria
Final Inspection Check drawing-defined profile, dimensions, end features and surface condition; complete agreed material, conductivity, coating and fit checks before packing

For inspection methods and available documentation, see our Quality Assurance page. Product-specific testing and acceptance criteria are confirmed before order placement.

Typical Applications

  • Copper terminal inserts cast into epoxy-embedded poles, switchgear or wall-bushing assemblies where the drawing specifies a ribbed interface.
  • Conductive posts and contact spouts for vacuum circuit breakers and GIS equipment.
  • Multi-stage copper connectors for transformers, converters and other high-current power equipment.
  • Ribbed or stepped conductive components for induction-heating, furnace and specialty power-supply assemblies.

Ribs may be used for retention, spacing, heat-transfer or another drawing-defined purpose. Current capacity, temperature rise, pull-out strength, partial-discharge performance and equipment voltage suitability require complete assembly design and validation; they are not established by the photograph alone.

Solid Copper Conductive Rod FAQ

What is a solid copper conductive rod?

It is a machined copper post or conductor with a solid main body and drawing-defined stepped diameters, ribs or end features. It can serve as a terminal insert, contact post or conductive transition component. The exact function depends on whether the ribs engage epoxy, a mechanical holder, a contact assembly or a thermal interface.

Is the rod always completely solid?

The main body is supplied as a solid conductive component, but end-face counterbores, threads or axial holes can be added when shown on the approved drawing. The supplied photographs show solid-looking end faces and do not establish whether a particular production version has an internal hole or threaded feature.

Which copper grades are available?

C11000, C10200 and C10100 can be reviewed for high-conductivity requirements, subject to the specified standard and condition. C18150 or C14500 may be considered separately where softening resistance, strength or machinability is more important. Grade selection should be based on conductivity, mechanical load, temperature and joining requirements.

What is the purpose of the ribs and grooves?

Their purpose is drawing-specific. Depending on the assembly, they may provide mechanical retention in a cast material, define spacing, increase exposed surface area or form a seal/interface profile. The presence of ribs does not by itself prove a cooling-fin, anti-pull-out or partial-discharge function; those requirements must be specified and validated.

Can the diameter, length and rib pattern be customized?

Yes. Provide overall length, each stepped diameter, rib count, rib angle, groove width and spacing, end-face geometry, chamfers and any hole or thread details. Also provide the mating component or mold dimensions. Large and small variants should be controlled under separate drawing or part numbers.

What tolerances can be achieved?

Diameter, groove spacing, coaxiality, end-face flatness and parallelism are reviewed feature by feature. Deep narrow grooves, thin ribs and long overhangs can affect machining stability and inspection access. Share datums and critical limits so the feasible tolerance and measurement method can be agreed before production; fixed sub-0.02 mm tolerances are not assumed for every feature.

Can the rod be silver-plated, tin-plated or surface-prepared for epoxy?

Selective or full silver, tin or nickel plating can be reviewed. Local or full roughening may also be considered where the drawing requires a bonding or casting interface. Specify the treated areas, coating or roughness requirement, masking, thickness and acceptance method. The copper-colored photographs do not prove a particular plating or surface-treatment condition.

Does this product have a fixed current, voltage or temperature rating?

No fixed rating is established by the material name or photograph alone. Current capacity and temperature rise depend on conductor cross-section, joint resistance, contact pressure, cooling, duty cycle and installation. Voltage, insulation and partial-discharge performance require equipment-level design review and testing against the applicable standard.

Request a Quote

Contact Cymber Metal with your 2D/3D drawing, copper grade and condition, overall length, stepped diameters, rib and groove details, end features, quantity, surface preparation or plating requirements, inspection documents, destination and target delivery date. Include the mating component, epoxy or mechanical interface, operating current, temperature-rise limit and equipment voltage where relevant.


  • Previous:
  • Next:

  • Write your message here and send it to us