Copper Rectangular Conductive Frame for Switchgear
Video
Short Description
Cymber Metal supplies custom copper rectangular conductive frames for switchgear and electrical connection assemblies. Machined from specified pure copper, the frame features a rectangular through-window, stepped upper edges and threaded connection holes on selected faces.
Window dimensions, wall thickness, mounting pads and hole patterns are produced to approved drawings. Busbar, conductor and flexible-shunt interfaces can be reviewed for the intended assembly, with optional plating and application-specific inspection requirements.
Key Features
- Open rectangular frame with radiused internal corners.
- Connection and mounting features on multiple selected faces.
- Drawing-defined contact surfaces, stepped edges and thread details.
- Custom copper grade, material condition and optional selective plating.
Manufacturing & Quality Control
| Stage | Scope |
|---|---|
| Drawing Review | Confirm current-path interfaces, mating parts, datums, wall sections and critical dimensions |
| Material and Blank Selection | Agree copper grade, condition and suitable bar, plate or forged stock |
| CNC Machining | Use CNC machining support for the central opening, stepped edges, contact faces and multi-face hole patterns |
| Deburring and Finishing | Remove edge and hole-exit burrs, clean the cavity and threads, and apply the agreed surface treatment |
| Final Inspection | Check drawing-defined geometry, thread requirements and contact faces; complete agreed material/coating checks before protective packing |
For inspection methods and available documentation, see our Quality Assurance page. Product-specific testing and acceptance criteria are confirmed before order placement.
Typical Applications
- Busbar collection and transition connections in switchgear.
- Drawing-specific conductive frames in vacuum circuit-breaker assemblies.
- Flexible-shunt and conductor connection interfaces.
- Custom terminal frames for industrial rectifiers and transformers.
Applications require review of current paths, joint design, mechanical loads and insulation clearances.
Copper Rectangular Conductive Frame FAQ
It provides drawing-defined conductive and mounting interfaces within a larger electrical assembly. Depending on the design, it can connect busbars, conductors or flexible shunts. It is not a complete circuit breaker or an insulating enclosure.
C11000, C10200 and C10100 can be reviewed against conductivity, strength, forming and joining requirements. If higher strength is needed, C18150 can be reviewed as a separate alloy option, not an interchangeable pure-copper grade.
A single-piece route can be specified using suitable bar, plate or forged stock. The blank size and machining sequence depend on the opening, wall sections and tolerances. Any fabricated or welded alternative requires separate approval.
Yes, subject to drawing review. Specify opening dimensions, corner radii, hole locations, thread sizes and engagement depths. Identify contact surfaces and mating parts, and state whether critical dimensions apply before or after plating.
Flatness, parallelism, perpendicularity and hole-position requirements are confirmed feature by feature. Large openings and thin walls can affect machining stability. Share datums and critical limits so the achievable tolerances and inspection method can be agreed before production.
No. The opening removes material compared with a solid body of the same outer size, but temperature rise depends on current distribution, joints, airflow and installation. Current rating, short-circuit withstand and dielectric performance require assembly-level validation.
Full or selective silver plating can be reviewed, with tin or nickel where specified. Define coating thickness, masking and acceptance requirements. Thread fit and mating dimensions must account for the coating; joint resistance also depends on contact preparation and clamping.
Material certificates, dimensional reports and coating records can be agreed with the order. Conductivity, internal-soundness checks and third-party inspection need specified methods and acceptance criteria. EN 10204 Type 3.1 documentation requires advance confirmation.
Request a Quote
Contact Cymber Metal with your 2D/3D drawing, copper grade and condition, quantity, window dimensions, hole and thread details, contact-face requirements, plating specification, inspection documents, destination and target delivery date. Include operating current, allowable temperature rise, mechanical loading and equipment voltage where relevant.










