Custom Stepped Copper Busbar with Raised Center Boss
Video
Short Description
This custom stepped copper busbar features a raised center boss, thinner side wings and controlled transition areas. The profile can be supplied as straight bar or cut components for switchgear contacts, power-module baseplates, battery systems and other electrical or thermal interfaces, subject to drawing and application review.
Available pure copper grades include C11000, C10200 and C10100. C10400/C10700 silver-bearing copper or C18150 chromium-zirconium copper can be reviewed as separate material options. Depending on the cross-section, tolerance and order volume, production may use extrusion and drawing, CNC profile machining, or a combined route with CNC machining support.
Key Features
- Raised center boss and thin side wings integrated into one custom cross-section.
- Near-net profile options can reduce downstream machining for suitable quantities and tolerances.
- Multiple copper grades can be reviewed against conductivity, strength and temperature requirements.
- Cut-to-length, holes, grooves, chamfers and other drawing-defined features are available.
- Optional silver, tin or nickel plating can be specified.
- Inspection scope and acceptance criteria are agreed before production.
Manufacturing & Quality Control
| Stage | Control Point |
|---|---|
| Drawing Review | Confirm cross-section, boss geometry, wing thickness, transition radii, critical tolerances, application and quantity |
| Material Selection | Select the copper grade, condition and specification according to conductivity, strength and service requirements |
| Profile Production | Use extrusion and drawing, CNC machining, or a combined route according to geometry, tolerance, tooling feasibility and volume |
| Secondary Processing | Cut to length and add holes, grooves, chamfers, pockets or other features required by the drawing |
| Surface Treatment | Clean and protect the copper surface; apply optional silver, tin or nickel plating when specified |
| Inspection | Check profile dimensions, straightness, flatness, surface condition and selected material properties |
| Documentation & Packing | Prepare specified records and protect finished surfaces for storage and export transport |
For inspection methods and available documentation, see our Quality Assurance page. Product-specific testing and acceptance criteria are confirmed before order placement.
Typical Applications
- Stationary contact bars and conductive profiles for switchgear, ACB and MCCB assemblies.
- Copper baseplates or heat-spreader profiles for IGBT and SiC power modules.
- Custom busbar components for EV battery packs and battery energy storage systems.
- Conductive sections for motors, generators, inverters and power-distribution equipment.
- Other drawing-specific electrical or thermal interfaces requiring a stepped copper cross-section.
Final suitability depends on current, allowable temperature rise, joint design, mechanical load, coating system and equipment standards. These conditions should be reviewed with the customer drawing.
Frequently Asked Questions
It is a custom copper conductor with a thicker central platform and thinner side sections. The boss can provide a defined mounting, contact or thermal interface, while the side wings connect the profile to the surrounding assembly.
Typical options include C11000, C10200 and C10100. C10400 or C10700 silver-bearing copper may be considered where improved softening resistance is required. C18150 CuCrZr is reviewed separately for higher strength or temperature resistance.
The route depends on geometry, tolerance, order quantity and tooling feasibility. Repetitive volumes may suit extrusion and drawing, while prototypes or complex low-volume parts may be CNC machined. A combined route is also available.
Yes. Overall width, boss width and height, wing thickness, transition angle, radii and edge details can be produced according to an approved 2D or 3D drawing.
Yes. Depending on the cross-section and logistics, the product can be supplied as straight profile bars or finished cut blocks. Saw cutting, milling, drilling, punching, chamfering and deburring can be added.
Yes. Full or selective plating can be reviewed. Please specify the coating material, thickness, coated area, masking zones and required inspection standard.
Tolerance depends on profile size, production route and material condition. Available inspections may include composition, conductivity, hardness, dimensions, straightness, flatness and coating thickness. MTCs and dimensional reports can be supplied as agreed.
Please provide the drawing, copper grade, applicable standard, material condition, critical tolerances, supply length, quantity, annual demand, machining or plating requirements, application, inspection documents and destination country.
Request a Quote
Please send:
- 2D drawing with the complete cross-section and critical tolerances.
- 3D model if pockets, holes or complex features are required.
- Copper grade, applicable standard and material condition.
- Bar length or finished-part dimensions.
- Order quantity and estimated annual demand.
- Conductivity, hardness, flatness and straightness requirements.
- Machining, plating, masking and inspection requirements.
- Application, operating current or temperature, destination and delivery schedule.
Contact Cymber Metal to review material selection, manufacturing feasibility and inspection requirements before ordering.









