Large-Section Dual-Ribbed Copper Busbar Profile
Video
Short Description
This large-section dual-ribbed copper busbar combines a wide central channel, two raised longitudinal ribs and outer locating wings in one custom cross-section. It can be supplied as straight profile bar or cut components for busway systems, switchgear assemblies, power-module baseplates and other drawing-specific conductive or thermal interfaces.
Typical pure copper grades include C11000, C10200 and C10100. Silver-bearing copper or C18150 CuCrZr can be reviewed as separate material options. Depending on the section, tolerance, quantity and application, production may use extrusion and drawing, CNC profile machining, or a combined route. See related electrical-grade extruded pure copper special shapes for additional profile capability.
Key Features
- Wide central channel with two raised ribs in one custom copper cross-section.
- Near-net profile options can reduce secondary machining for suitable quantities and tolerances.
- Multiple copper grades can be reviewed against conductivity, strength and service-temperature requirements.
- Available as straight bars or cut-to-length components.
- Optional drilling, tapping, slots, local milling and selective plating.
- Profile geometry and inspection criteria are agreed before production.
Manufacturing & Quality Control
| Stage | Control Point |
|---|---|
| Drawing Review | Confirm overall width, channel width, rib height, slopes, radii, wing geometry, critical tolerances, application and quantity |
| Material Selection | Select the copper grade, condition and specification according to conductivity, strength, joining and temperature requirements |
| Profile Production | Use extrusion and drawing, CNC machining, or a combined route according to geometry, tolerance, tooling feasibility and volume |
| Straightening & Finishing | Control agreed straightness, twist and flatness; finish contact or locating surfaces where specified |
| Secondary Processing | Add holes, threads, slots or pockets with copper machining support |
| Surface Treatment | Clean and protect the surface; apply optional silver, tin or nickel plating |
| Inspection | Verify cross-section, rib height, channel width, base thickness, straightness, flatness and selected material properties |
| Documentation & Packing | Prepare specified records and protect profile edges and finished surfaces during transport |
For inspection methods and available documentation, see our Quality Assurance page. Product-specific testing and acceptance criteria are confirmed before order placement.
Typical Applications
- Main or branch conductors in high-current busway systems.
- Guide-rail or plug-in conductor profiles for MV/LV switchgear and drawer cabinets.
- Grooved copper baseplates or heat-spreader profiles for power modules and converters.
- Conductive rail sections for industrial motors, generators and electromagnetic equipment.
- Custom high-current interfaces requiring a wide channel and raised locating ribs.
Related wide pure copper busbars for switchgear can be reviewed when a conventional flat section is more suitable.
Final suitability depends on current, allowable temperature rise, short-circuit forces, support spacing, joint design, mechanical load, coating and equipment standards. These conditions should be reviewed with the complete customer drawing.
Frequently Asked Questions
It is a custom copper conductor with a wide central channel and two raised longitudinal ribs. The ribs can provide locating, guiding, contact or structural functions, while the central section carries current or supports a thermal interface.
C11000, C10200 and C10100 are typical pure copper options. C10400 or C10700 silver-bearing copper may be considered where softening resistance is important. C18150 CuCrZr can be reviewed when higher strength or temperature resistance is required.
The route depends on cross-section complexity, tolerance, quantity and tooling feasibility. Repetitive volumes may suit extrusion and drawing, while prototypes or complex low-volume parts may be machined from solid material.
Yes. Overall width, base thickness, channel width, rib height, slopes, transition radii and side-wing dimensions can be reviewed from a 2D or 3D drawing.
Yes. Depending on section size and logistics, the product can be supplied as straight profile bars or finished cut segments. Cutting, drilling, tapping, milling, slotting, chamfering and deburring can be added.
Yes. Full or selective plating can be reviewed. Please specify the coating material, thickness, coated area, masking zones, adhesion requirements and inspection standard.
Tolerance depends on profile size, manufacturing route and material condition. Available checks may include composition, conductivity, hardness, cross-section dimensions, straightness, flatness, parallelism and coating thickness.
Please provide the drawing, copper grade and standard, material condition, critical profile tolerances, bar or cut length, quantity, machining or plating requirements, application, operating conditions, document requirements and destination.
Request a Quote
Please send:
- Complete cross-section drawing with channel, rib, wing and transition dimensions.
- 3D model if holes, pockets, slots or local machining are required.
- Copper grade, applicable standard and material condition.
- Straight-bar length or finished-part dimensions.
- Order quantity, annual demand and sample requirements.
- Conductivity, hardness, straightness, flatness and surface requirements.
- Machining, plating, masking and inspection requirements.
- Application, operating current, temperature and support conditions.
- Documentation, packing, destination and requested delivery schedule.
Contact Cymber Metal for material selection, profile manufacturability review and quotation.










