Arc-Backed Multi-Groove Copper Profiles

Short Description:

Item Specification
Product Arc-Backed Multi-Groove Copper Profile / Custom Copper Contact Rail
Material Options UNS C11000, C10200 or C10100; grade confirmed by order
Applicable Standards ASTM B187/B187M or EN 13605, where applicable to the selected grade and product form
Chord Width 10–200 mm, subject to section review
Overall Height 4–80 mm, dependent on width, back radius and groove geometry
Cross-Section Convex arc back with a central rectangular slot and two flanking concave grooves
Groove Configuration Symmetrical or asymmetrical; widths, depths, radii and positions according to drawing
Supply Length Cut sections 15–800 mm or bars 1000–6000 mm, subject to confirmation
Material Condition Annealed or cold-worked condition; designation confirmed against the selected standard
Surface Options As-drawn or machined finish; optional silver, tin or nickel plating
Custom Machining Drilling, tapping, slot finishing, end features and other drawing-defined operations
Tolerance Back-arc profile, slot dimensions, groove position, straightness and twist according to the approved drawing
Inspection / Documentation Material certificates and dimensional, conductivity or hardness reports as specified

Product Detail

Product Tags

Video

Short Description

Custom arc-backed copper profiles combining a convex rear surface, a central rectangular slot and two flanking curved grooves. Supplied as profile bars or cut sections, with drawing-defined dimensions, material condition, machining and optional plating.

Arc-Backed Copper Profile Overview

An arc-backed copper profile combines a curved rear surface with multiple longitudinal grooves on the opposite face. The central slot and side grooves provide distinct locating surfaces for customer-designed contact components, guides or supporting parts.

Cymber Metal supplies these sections in selected pure copper grades for switchgear and tubular busbar component manufacturing. The back radius, groove geometry and mating clearances are defined by the assembly drawing; the curved shape alone does not guarantee full contact or secure retention.

 Key Features

  • Arc-backed geometry: Custom rear radius for a defined curved mating surface.
  • Three-groove arrangement: Central slot and two side grooves accommodate different locating requirements.
  • Drawing-based configuration: Adjustable groove positions, section dimensions and cut lengths.
  • Flexible supply: Profile stock, cut blanks or further-machined components with optional plating.

Manufacturing & Quality Control

Stage Scope
Material Selection Confirm copper grade, material condition and required electrical or mechanical properties
Profile Production Review custom copper profile extrusion and drawing routes for the specified section
Cutting & Machining Cut to length and deburr; apply precision machining where required for critical features
Surface Treatment Specify plating type, thickness, coverage and masking requirements
Dimensional Inspection Check back-arc geometry, central slot, side grooves, length, straightness and twist according to the inspection plan
Material & Surface Checks Conductivity, hardness, material verification and surface inspection as agreed
Documentation Material and inspection records according to the order specification

Our quality assurance approach supports order-specific inspection planning. Critical mating surfaces and datum requirements should be identified before production.

Typical Applications

Application Intended Use
Switchgear Contact Assemblies Drawing-defined contact rail blanks and locating sections for VCB, GIS or disconnector components
Tubular Busbar Assemblies Copper sections with a rear radius matched to the specified tubular mating surface
Custom Electrical Equipment Conductive supports and guide profiles requiring combined flat-slot and curved-groove geometry

FAQ

What does “three-channel copper profile” mean?

It describes the cross-section: one central rectangular slot and two curved side grooves. These are geometric features in a single copper section, not three electrically isolated conductors.

Which copper grades are available?

C11000 electrolytic tough-pitch copper and oxygen-free grades such as C10200 or C10100 can be reviewed. Selection depends on the required material standard, conductivity, processing route and service conditions.

Can the curved back match a tubular busbar?

The back radius can be specified for a particular mating surface. Provide the tube dimensions, fit requirements and tolerances; a curved back does not automatically establish zero-gap contact.

Do the grooves securely retain contact fingers or springs?

They can provide locating surfaces, but secure retention and contact pressure depend on the complete assembly. Mating parts, fasteners, spring preload and operating movement must be evaluated together.

What dimensional tolerances can be supplied?

Tolerance feasibility depends on section size, material condition and production route. Mark critical slot dimensions, groove positions, back-arc geometry and datum references on the drawing for review.

Can the profiles be silver-, tin- or nickel-plated?

These finishes can be reviewed according to the application. Specify coating thickness, coverage, masking, adhesion and inspection requirements, particularly on functional contact surfaces.

What current rating does this profile have?

There is no universal current rating for the profile shape. Allowable current depends on copper cross-section, contact resistance, cooling, temperature-rise limits and the complete equipment design.

What inspection documents can accompany an order?

Material certificates and dimensional reports can be specified, with conductivity, hardness or coating inspection results where required. Document type, inspection scope and acceptance criteria should be agreed before production.

Request a Quote

Contact Cymber Metal with your section drawing, mating-surface dimensions, copper grade, material condition, critical tolerances, cut length, quantity, machining and plating requirements. Include the application, required tests and documents, delivery destination and target schedule for technical review.


  • Previous:
  • Next:

  • Write your message here and send it to us