Custom Copper-Aluminum Bimetal Transition Disc

Short Description:

Item Specification
Product Custom Copper-Aluminum Bimetal Transition Disc / Cu-Al Conductive Washer
Construction Copper layer bonded to an aluminum base; single-side copper-facing construction or other agreed layer arrangement
Copper Options C11000, C10200, C10100 or another copper grade confirmed by order specification
Aluminum Options 1050, 1060, 1070, 1100, 3003 or 6061 aluminum, subject to bonding and application review
Applicable Standards Raw materials according to the agreed ASTM, EN, JIS or GB/T specification; finished-part and bond acceptance according to the approved drawing and inspection plan
Outer Diameter 5–500 mm; subject to material thickness, tooling and cutting-route review
Total Thickness 0.5–30 mm; custom thickness subject to composite-sheet availability and technical review
Layer Ratio Customized according to electrical, mechanical, joining and weight requirements
Supply Forms Solid disc, center-hole washer, annular ring or custom drawing-based outline
Production Route Cut or formed from bonded sheet by blanking, stamping, laser cutting or CNC profile machining
Edge Condition As-cut, deburred, chamfered or finish-machined as specified
Surface Cleaned or polished; optional anti-tarnish treatment, tin plating, silver plating or nickel plating
Custom Machining Center holes, bolt holes, slots, counterbores, grooves, flats, chamfers and marking
Tolerance Diameter, thickness, flatness, burr and hole-position tolerances according to the approved drawing
Inspection Material verification, dimensions, flatness, surface condition, layer thickness and agreed bond or interface tests
Documentation Material certificates, dimensional reports and applicable bond, coating or inspection records available as specified
Compliance RoHS and REACH documentation available subject to material and order confirmation

Product Detail

Product Tags

Video

Short Description

A copper aluminum bimetal disc is a conductive transition component with a copper-facing layer and an aluminum-facing layer. It is designed for drawing-specific joints between copper and aluminum conductors, including busbars, switchgear connections, battery terminals and power-distribution assemblies.

Cymber Metal can supply solid discs, center-hole washers and custom cut profiles from copper-aluminum composite materials. Diameter, total thickness, layer ratio, hole pattern, flatness, surface treatment and interface-test requirements are confirmed from the customer drawing and order specification. Related copper-aluminum bimetallic washers are also available for project review.

Key Features

  • Copper and aluminum contact surfaces combined in one transition component.
  • Solid-disc, washer and custom-outline options for different joint designs.
  • Custom diameter, thickness, layer ratio, hole pattern and edge finish.
  • Cutting, deburring, leveling and secondary machining available to drawing.
  • Optional anti-tarnish treatment or silver, tin and nickel plating.
  • Bond and dimensional acceptance criteria agreed before production.

Manufacturing & Quality Control

Stage Control Point
Drawing Review Confirm disc geometry, layer orientation, copper and aluminum grades, joint design, tolerances, quantity and service conditions
Composite Material Selection Select the bonded sheet construction and layer ratio according to electrical, mechanical, thermal and joining requirements
Bonding Route Use an agreed composite-material route, such as roll bonding, when specified and supported by the selected material system
Cutting & Forming Produce discs or washers by blanking, stamping, laser cutting or CNC profile cutting according to diameter, thickness and volume
Leveling & Edge Finishing Control specified flatness, remove burrs and add chamfers or finish-machined edges where required
Secondary Processing Add holes, slots, grooves or counterbores with copper machining support
Surface Treatment Clean and protect the surfaces; apply optional plating or anti-tarnish treatment
Inspection Verify dimensions, layer thickness, surface condition and agreed bond or interface properties
Documentation & Packing Prepare specified inspection records and protect finished surfaces during transport

For inspection methods and available documentation, see our Quality Assurance page. Product-specific testing and acceptance criteria are confirmed before order placement.

Typical Applications

  • Copper-to-aluminum busbar transition joints in switchgear and distribution equipment.
  • Conductive transition washers for substations, control cabinets and power systems.
  • Battery terminal and busbar interfaces for EV and battery energy storage assemblies.
  • Connection components for inverters, converters and renewable-energy equipment.
  • Custom electrical transition joints where copper and aluminum conductors meet.

Final suitability depends on current, temperature rise, contact pressure, joint preparation, sealing, fastener design, coating system and environmental exposure. The complete connection should be reviewed against the customer drawing and applicable equipment standard.

Frequently Asked Questions

What is a copper aluminum bimetal disc?

It is a layered transition component with a copper-facing surface and an aluminum-facing surface. Each side can be joined to the corresponding conductor material, helping create a controlled transition between copper and aluminum.

How is it different from a solid copper disc?

A solid copper disc uses one material throughout. A copper-aluminum bimetal disc combines two materials and is intended for transition-joint designs where one side connects to copper and the other to aluminum.

Can it be used between copper and aluminum busbars?

Yes, but the complete joint must be engineered correctly. Contact area, fastener load, surface preparation, layer orientation, sealing, temperature rise and environmental exposure should be specified before approval.

Which copper and aluminum grades are available?

Typical copper options include C11000, C10200 and C10100. Aluminum options may include 1050, 1060, 1070, 1100, 3003 or 6061. The final combination depends on availability, bonding compatibility and application requirements.

Can you produce rings, center holes or custom shapes?

Yes. The component can be supplied as a solid disc, center-hole washer, annular ring or custom outline. Bolt holes, slots, flats, grooves, counterbores, chamfers and identification marks can be added.

How is the bond between copper and aluminum checked?

Depending on the order specification, inspection may include visual interface checks, layer-thickness measurement, bend or peel testing, metallographic examination, ultrasonic inspection or another customer-approved method.

What tolerances and documents can be supplied?

Diameter, thickness, flatness, burr height and hole-position tolerances are reviewed against the manufacturing route and part size. Material certificates, dimensional reports and relevant bond or coating records can be supplied as agreed.

What information is required for a quotation?

Please provide the drawing, copper and aluminum grades, layer orientation and ratio, dimensions, tolerances, quantity, joining method, operating conditions, surface treatment, inspection requirements and destination.

Request a Quote

Please send:

  • 2D drawing with diameter, thickness, holes and critical tolerances.
  • Copper grade, aluminum grade, layer orientation and required layer ratio.
  • Joint design, joining process and intended conductor materials.
  • Order quantity, annual demand and sample requirements.
  • Flatness, burr, surface finish and plating requirements.
  • Required bond, interface, conductivity or dimensional tests.
  • Application, operating current, temperature and environment.
  • Documentation, packing, destination and requested delivery schedule.

Contact Cymber Metal for material selection, manufacturability review and quotation.


  • Previous:
  • Next:

  • Write your message here and send it to us