Cold-Drawn Pure Copper Inverted T-Profile Busbar Series

Short Description:

Item Specification
Product Cold-Drawn Pure Copper Inverted T-Profile Busbar Series
Product Forms T-section busbar, knife contact blade, T-bar connector or custom copper profile
Available Grades C11000, C10200, C10100, Cu-ETP, Cu-OF, T2, TU1 and TU2
Optional Specialty Grades C10400/C10700 silver-bearing copper or C18150 CuCrZr subject to technical review
Applicable Standards ASTM B187/B187M, ASTM B152/B152M, ASTM B133, EN 13601, EN 13605, JIS H3140, JIS H3250, GB/T 5585 or agreed specification
Manufacturing Route Hot extrusion, precision cold drawing, multi-roll straightening and cold sawing
Base Flange Width × Total Height Indicative range: 12–220 mm × 15–220 mm
Indicative Current Class Approximately 400–6300 A; confirm by electrical and thermal design
Web and Flange Thickness Indicative range: 2.0–45.0 mm
Wall Configuration Equal-wall, thick-web/thin-base, thin-web/thick-base or asymmetric offset
Top Edge Geometry Full-radius bullnose or sharp flat-top
Supply Length Cut segments approximately 15–1200 mm; bars approximately 1000–6000 mm
Wall Thickness Tolerance Indicative range: ±0.02–0.05 mm
Web-to-Base Perpendicularity Indicative value: ≤0.02–0.04 mm
Root Radius Indicative range: R ≤0.2–0.5 mm
Electrical Conductivity Target values from 98% IACS for applicable grades; confirm by grade and test method
Surface Roughness Indicative value: Ra ≤0.4 μm
Temper H02/H04 hard temper or O60 annealed condition
Surface Options Bright copper, anti-tarnish passivation, silver plating, tin plating or nickel plating
Silver Plating Full or selective plating, approximately 10–30 μm when specified
Secondary Operations Drilling, tapping, punching, chamfering, deburring and CNC machining
Inspection Chemical composition, conductivity, hardness, profile dimensions, perpendicularity, flatness and surface inspection
Documentation Material certificates, dimensional reports and process records according to order requirements

Product Detail

Product Tags

Video

Short Description

This cold-drawn pure copper inverted T-profile series is designed for electrical assemblies that require a continuous T-section with a dual-flange base and vertical web. Available in equal-wall, thick-web, thin-base and asymmetric configurations, the profiles can be supplied with flat-top or bullnose edges.

Typical uses include switchgear knife contacts, MCC drawer connections, circuit-breaker terminals, sandwich busway branch joints and high-rigidity copper busbars. Grade, temper, dimensions, edge geometry, plating and cut length can be customized according to the approved drawing.

Product Overview

The inverted T-profile is formed as a continuous copper section rather than assembled from two separately welded bars. The dual-flange base provides a broad mounting and contact surface, while the vertical web supplies height, alignment and structural stiffness.

Flat-top edges can be specified for orthogonal busbar lapping. Bullnose edges may be selected where smoother insertion guidance or rounded contact geometry is required. Equal-wall, thick-web/thin-base, thin-web/thick-base and offset configurations are available for different electrical and mechanical layouts.

For general material information, visit Cymber Metal’s Pure Copper product range.

All dimensions, current classes and tolerances are indicative enquiry ranges. Final values require drawing review, material confirmation and application evaluation.

Key Features

Feature Description
Continuous T-Section Monoblock profile formed from one copper section, avoiding a separately welded T-junction.
Dual-Flange Base Broad base geometry for mounting, positioning and conductive contact.
Vertical Web Provides section height, alignment and additional cooling perimeter.
Wall Configurations Equal-wall, thick-web, thin-base and asymmetric offset layouts available.
Top Edge Options Flat-top or bullnose edge according to insertion, contact and assembly requirements.
Copper Grade Options C11000, C10200, C10100 and other agreed copper grades.
Temper Options Hard-drawn H02/H04 or annealed O60 condition.
Surface Treatment Bright copper, passivation, silver, tin or nickel plating subject to review.
Custom Dimensions Base width, total height, web thickness, flange thickness and offset can be customized.
Secondary Machining Drilling, tapping, punching, chamfering, deburring and CNC machining available.

Manufacturing & Quality Control

Manufacturing Process

Process Stage Description
Material Selection C11000, C10200, C10100 or another specified copper grade is selected according to conductivity, temper, joining and application requirements.
Billet Preparation Copper billets are prepared with controlled composition and internal quality according to the agreed material specification.
Hot Extrusion The billet is extruded into a preliminary T-section or near-net profile.
T-Section Cold Drawing Dedicated tungsten-carbide or equivalent forming dies control the web, base flange, wall thickness and top-edge geometry.
Unequal-Wall Control Die and drawing parameters are adjusted for equal-wall, thick-web, thin-base or asymmetric sections.
Straightening Multi-roll straightening controls web alignment, base flatness and overall straightness.
Cutting Precision cold sawing produces bars or cut segments according to the required length.
Secondary Machining Base drilling, tapping, punching, chamfering, deburring and CNC machining can be added after profile forming.
Plating and Finishing Silver, tin or nickel plating can be reviewed according to the electrical and environmental requirements.
Temper Control Hard-temper material can be supplied as drawn; annealed material can be supplied after controlled heat treatment.

For custom profile tooling and section development, see custom copper profile extrusion support.

Quality Control System

Inspection Item Quality Control Method
Material Traceability Traceability from cast heat or billet through extrusion, drawing, straightening, cutting and finishing.
Chemical Composition Optical emission spectroscopy or another agreed method according to the selected grade.
Electrical Conductivity Digital conductivity measurement using a suitable test method.
Hardness Vickers or equivalent hardness testing for the specified temper.
T-Section Geometry Profile projector or CMM measurement of base width, web height, wall thickness and offset.
Web Perpendicularity Inspection of the web-to-base 90° relationship using precision measurement equipment.
Top-Edge Geometry Verification of flat-top dimensions or bullnose radius according to the drawing.
Root Area Inspection of root radius, transitions and visible surface condition.
Internal Soundness Ultrasonic inspection can be discussed for critical or larger sections.
Flatness and Straightness Measurement of base flatness, web alignment and full-length straightness.
Surface Quality Visual inspection for scratches, dents, cracks, oxidation and other visible defects.
Documentation Material certificates, dimensional reports and process records available according to order requirements.
Third-Party Inspection SGS or other third-party inspection can be arranged when required.

Cymber Metal’s quality assurance system supports material verification, dimensional inspection and technical documentation.

Typical Applications

Application Typical Use Design Considerations
LV and MV Switchgear Stationary knife contact blades and conductive switching interfaces Confirm current, insertion force, contact pressure, plating and insulation clearance.
MCC Drawers Flat-top or bullnose inverted T-profile contact blades Edge geometry should match the mating contact and insertion path.
Circuit Breakers Orthogonal transition blocks and outgoing terminal connectors Confirm terminal layout, web height, base width and joining method.
Vacuum Circuit Breakers Copper T-section conductive interfaces and mounting profiles Review current, temperature rise, contact arrangement and assembly clearance.
Sandwich Busways T-branch joints and conductive branch connection sections Confirm branch geometry, fixing method, insulation and installation alignment.
Wind Inverters High-rigidity T-section main busbars and connection parts Check current, thermal cycling, vibration and mechanical support.
Photovoltaic Inverters High-conductivity copper power distribution sections Confirm enclosure space, temperature rise, plating and connection method.
Industrial Rectifier Cabinets T-profile busbars and orthogonal copper connectors Review current capacity, heat dissipation and fastening details.
Energy-Storage Equipment Copper connection and support profiles Confirm short-circuit forces, temperature and insulation requirements.
Custom Electrical Equipment Special T-sections for customer-designed systems Provide a 2D or 3D drawing for manufacturability review.

The final grade, temper, profile geometry and plating should be selected according to current, temperature, mechanical load, mating contact and installation conditions.

FAQ

What is an inverted T-profile copper busbar?

It is a copper electrical profile with a broad horizontal base flange and a vertical web, creating an inverted T-shaped cross-section. The design combines a conductive base with a raised alignment or contact section.

Which copper grades are available?

Common options include C11000, C10200 and C10100, together with Cu-ETP, Cu-OF, T2, TU1 and TU2 equivalents. C10400, C10700 or C18150 may be reviewed for applications requiring additional thermal or mechanical performance.

What is the difference between flat-top and bullnose designs?

A flat-top design has a straight upper edge and is often used for orthogonal lapping or defined contact surfaces. A bullnose design has a rounded upper edge and may support smoother insertion or rounded contact geometry. The choice depends on the mating component.

Can the profile be equal-wall or asymmetric?

Yes. The series can be designed with equal wall thickness, a thick web with a thin base, a thin web with a thick base or offset flange dimensions. The drawing should identify the required web, flange and centerline dimensions.

Is the T-section welded from two copper bars?

The profile is designed as a continuous extruded and drawn section. This avoids relying on a separate welded junction between the web and base. The final forming route, temper and inspection plan should be confirmed for each order.

Can it be used as a switchgear knife contact?

It can be evaluated for stationary knife contacts and conductive switching interfaces. Contact pressure, insertion force, current, temperature rise, surface treatment, mating geometry and insulation clearance must be checked before final approval.

Are silver plating and machining available?

Yes. Full or selective silver plating, tin plating or nickel plating can be reviewed. Drilling, tapping, punching, chamfering, deburring and CNC machining are also available according to the approved drawing.

What information is needed for a quotation?

Please provide the copper grade, standard, cross-section drawing, base width, total height, web and flange thickness, top-edge geometry, tolerance, length, quantity, plating, inspection documents and destination country.

Request a Quote

Cymber Metal can review this inverted T-profile as a raw drawn section, cut contact blade, plated busbar component or further-machined electrical part.

Required Information Details
Drawing 2D or 3D cross-section and assembly drawing
Material Copper grade, equivalent grade and applicable standard
Geometry Base width, total height, web thickness, flange thickness and offset
Top Edge Flat-top, bullnose or other specified edge geometry
Tolerance Wall thickness, perpendicularity, flatness, radius and surface roughness
Temper H02/H04 hard temper or O60 annealed condition
Length Bar length or cut-segment requirements
Quantity Sample quantity, production quantity and estimated annual demand
Surface Treatment Bare copper, passivation, silver, tin or nickel plating
Secondary Processing Drilling, tapping, punching, chamfering, deburring or CNC machining
Inspection Documents MTC, dimensional report, conductivity data, RoHS, REACH or third-party inspection
Delivery Details Destination country and packing requirements

For technical review and quotation, contact Cymber Metal.


  • Previous:
  • Next:

  • Write your message here and send it to us