Custom Pure Copper Special-Section Profiles
Video
Short Description
Cymber Metal supplies custom copper profiles in special cross-sections, including scalloped channels, raised-boss sections, multi-step profiles, hook-lip sections and T-sections. Material grade, temper, dimensions, forming and machining route, tolerances and surface treatment are reviewed against the customer’s drawing and order requirements. Depending on the profile, production may involve extrusion, drawing, profile forming, machining or a combination of processes.
Product Overview
Custom copper profiles are used when a standard rectangular bar or strip does not match the required component geometry. Special cross-sections can be designed for electrical contacts, busbar transitions, conductor supports and other equipment interfaces.
The listed shapes and applications are examples from the product series, not a claim that every profile is suitable for every assembly. Cymber Metal can review pure copper material options and custom copper profile extrusion based on the drawing.
Product Features
- Custom cross-sections for non-standard electrical and mechanical interfaces.
- Options include scalloped, stepped, raised-boss, hook-lip and T-shaped geometries.
- Material grade and condition can be reviewed against conductivity, forming and assembly requirements.
- Forming and machining routes are selected according to section geometry and order quantity.
- Straight lengths and cut pieces can be reviewed against the drawing.
- Optional surface treatment or plating can be specified for the intended application.
- Critical dimensions and inspection scope are confirmed before production.
Manufacturing Process & Quality Control
The manufacturing route depends on the profile geometry, selected material, condition and order quantity. Not every process applies to every product.
| Stage | Process / Control |
|---|---|
| Drawing Review | Review section geometry, dimensions, tolerances, material and application |
| Material Selection | Confirm grade and applicable standard against the purchase specification |
| Profile Production | Extrusion, drawing, rolling, other profile forming or machining may be considered after technical review |
| Secondary Machining | CNC form milling or other machining may be used for features not produced by the forming route; see fine machining services |
| Cutting & Finishing | Cut to agreed length and finish edges or surfaces as specified |
| Surface Treatment | Optional plating or anti-tarnish treatment, subject to order requirements |
| Inspection | Agreed checks may include material verification, dimensions, profile geometry and surface condition |
| Quality Records | Inspection scope and documents are agreed for each order; see Quality Assurance |
Typical Applications
Potential applications depend on the drawing and engineering review:
- Switchgear and circuit-breaker contact assemblies
- Busbar transitions and electrical connection components
- Conductor or cable support profiles
- Power-module and heat-spreader components
- Generator and motor components, including damper-bar profiles
- Custom conductive parts for industrial electrical equipment
Frequently Asked Questions
They are copper products made with a non-standard cross-section rather than a simple rectangular or round form. Examples include stepped, scalloped, T-shaped and hook-lip profiles. The final geometry and material should be specified on the customer drawing.
The product series includes scalloped channels, raised-boss sections, multi-step profiles, hook-lip offsets and T-sections. Other geometries can be reviewed from a drawing. Feasibility depends on the dimensions, material and required production route.
The supplied product information lists C11000, C10200, C10100, CW004A, CW008A, T2, TU1 and TU2. Please specify the required grade and standard. Grade equivalency should be checked against the material specification and certificate.
C18150 CuCrZr and C10400/C10700 silver-bearing copper may be reviewed as separate alloy options. They are not pure copper grades, so the material, properties and applicable standard should be specified separately.
The route is selected after reviewing the drawing. Depending on the profile, it may involve extrusion, drawing, profile forming, CNC machining or combined processes. The exact route should be confirmed for the order rather than assumed for every section.
Cut lengths and surface treatments can be specified for review. Available plating options may include silver, tin or nickel, subject to the profile, finish requirements and order specification.
Please provide the drawing or 3D model, material grade and standard, dimensions, tolerances, temper, surface finish or plating requirements, quantity and application. Required inspection documents should also be listed with the RFQ.
These values depend on the selected grade, condition, geometry and production route. Please identify the required values on the drawing or specification so the team can review feasibility and confirm them before production.
Request a Quote
Send your drawing or 3D model together with material grade, standard, dimensions, tolerances, quantity, surface treatment, application and inspection requirements for review. Contact Cymber Metal to discuss the material and production route.












