Custom U-Channel Copper Contact Blocks
Video
Short Description
Custom copper contact blocks featuring a deep U-shaped slot and unequal wall thicknesses. Supplied as cut blocks or profile bars, with material selection, slot finishing, drilling, tapping and optional plating according to approved drawings.
U-Channel Copper Contact Block Overview
A U-channel copper contact block is a conductive component with an open longitudinal slot for receiving a mating conductor or forming part of an electrical connection assembly. This asymmetric design combines a thinner wall with a thicker opposite wall, allowing different positioning and machining requirements within one section.
Cymber Metal supports suitable pure copper materials, profile processing and secondary machining. Final fit, contact pressure and electrical performance depend on the complete connection design, not the channel shape alone.
Key Features
Deep-slot geometry for conductor positioning; unequal walls for different structural and machining requirements; cut-block or bar supply; optional secondary machining and selective plating. Mating fit and functional surfaces are defined by the customer’s assembly requirements.
Manufacturing & Quality Control
The production route and inspection plan are selected according to section geometry, material condition and order requirements.
| Stage | Process / Control |
|---|---|
| Material Review | Confirm grade, condition, applicable standard and electrical or joining requirements |
| Profile Forming | Custom copper profile extrusion and, where appropriate, supported cold drawing and straightening |
| Secondary Machining | Precision machining support for slot finishing, cutting, holes, threads and drawing-defined details |
| Dimensional Inspection | Check slot width, wall thickness, corner radii and other specified geometric tolerances |
| Additional Verification | Conductivity, hardness, surface roughness or plating checks according to the agreed inspection plan |
| Packing & Records | Protect functional surfaces and supply the agreed material and inspection documentation |
Inspection scope, acceptance criteria and sampling frequency should be confirmed before production. See our quality assurance page for further information.
Typical Applications
| Application | Potential Use |
|---|---|
| Switchgear & Circuit Breakers | Conductive seats or receptacle bodies within an engineered contact assembly |
| Busway & Power Distribution | Slotted connection bodies for mating copper conductors |
| Flexible Copper Shunts | Termination pockets for drawing-defined brazed connections |
| Industrial Power Equipment | Custom conductive seats and conductor-positioning components |
FAQ
It is a copper component with an open U-shaped slot. The slot can receive a mating conductor or serve as a termination pocket. This version has unequal wall thicknesses rather than a symmetrical channel section.
C11000 is commonly considered for general conductive components. C10200 and C10100 are oxygen-free options where oxygen content or joining conditions matter. Final selection should consider conductivity, material condition, joining process and the applicable specification.
Yes. Overall dimensions, slot width, slot depth, wall thicknesses and secondary features can be reviewed against your drawing. Narrow slots, thin walls and deep sections require a manufacturability assessment before dimensions and tolerances are confirmed.
No. A rigid copper channel does not automatically provide controlled contact pressure. Reliable electrical contact requires an engineered mating fit and an appropriate clamping, spring or joining arrangement. Contact resistance and temperature rise should be validated at assembly level.
The slot can be designed as a brazing pocket for a foil stack or flexible conductor. Copper grade, joint clearance, filler material, heating method and atmosphere must be reviewed together. Oxygen-free copper may be appropriate for certain reducing-atmosphere brazing processes.
These depend on slot depth, width, wall thickness, length, material condition and processing route. Please identify critical dimensions and functional surfaces on the drawing. Final tolerances and roughness requirements are confirmed after technical review.
These finishes can be reviewed for the intended application. Please specify the plated areas, coating thickness, applicable standard and inspection requirements. Allowance for plating buildup should be included when defining the finished slot dimensions.
Material certificates and dimensional reports can be specified with the order. Conductivity, hardness, roughness and plating reports depend on the agreed inspection scope. Any EN 10204 3.1, RoHS or REACH documentation requirement should be raised during enquiry for confirmation.
Request a Quote
Please contact Cymber Metal with your drawing, copper grade, standard, material condition, dimensions, tolerances, quantity and surface requirements. Include the mating conductor details, operating current, joining method, required documents, destination and target delivery date where available.









