Custom Inverted T-Section Pure Copper Profiles for Switchgear
Video
Short Description
Cymber Metal supplies custom inverted T-section pure copper profiles and high-web copper terminal blocks for switchgear and electrical assemblies. The one-piece T-shaped section combines a horizontal flange with a vertical web for applications requiring a compact conductive connection. Material grade, dimensions, relief features, surface finish and tolerances are confirmed according to the customer’s drawing and order requirements.
Product Overview
This product is a custom T-section copper profile with a raised vertical web and a horizontal base flange. The integrated structure can be used where a standard flat busbar or separately joined copper parts cannot provide the required installation height or connection geometry.
The profile may be produced as a cut block, straight length or machined component. Depending on the geometry, grade and quantity, the production route may include extrusion, drawing, profile forming, CNC machining or other secondary operations.
For material selection, see Cymber Metal’s pure copper products. For non-standard copper sections, the custom copper profile extrusion service can be reviewed with the drawing.
Product Features
- One-piece T-section geometry with an integrated vertical web and base flange.
- Suitable for custom electrical connections where a standard flat busbar is not sufficient.
- Custom web height, flange width, thickness and relief-groove design.
- Can be supplied as individual cut blocks or longer straight sections.
- Material options include high-conductivity pure copper and oxygen-free copper grades.
- Optional drilling, tapping, machining and plating can be reviewed according to the drawing.
- The integrated profile can reduce the need for a separately joined right-angle copper assembly where the design permits.
- Final dimensional accuracy and surface requirements are confirmed before production.
Manufacturing Process
The manufacturing process depends on the cross-section, material, quantity and required tolerance.
| Stage | Process / Control |
|---|---|
| Drawing Review | Confirm web height, flange width, thickness, relief groove, holes, length and critical tolerances |
| Material Selection | Select the copper grade and applicable standard according to conductivity, forming and application requirements |
| Profile Forming | Extrusion, drawing, rolling or another suitable forming process may be selected after technical review |
| Secondary Machining | CNC milling, drilling, tapping, wire EDM or form machining may be used for special features; see fine machining services |
| Cutting | Precision saw cutting to the required length with edge finishing as specified |
| Surface Treatment | Optional silver, tin or nickel plating or anti-tarnish treatment |
| Inspection | Profile dimensions, flange-to-web geometry, flatness, surface condition and material requirements checked according to the order |
| Documentation | Inspection records and material documentation provided according to the agreed specification; see Quality Assurance |
The exact production route should be confirmed after reviewing the drawing. Not every T-section profile requires all of the processes listed above.
Typical Applications
Potential applications include:
- Medium-voltage and low-voltage switchgear terminals
- ACB, MCCB and VCB outgoing connection components
- Circuit-breaker conductor supports
- High-current electrical transition blocks
- Generator rotor damper bars and motor slot-wedge components
- Induction-heating transition bridges
- Specialty transformer conductive parts
- Sliding-contact rails and precision conductive guides
- Custom copper connection structures for industrial electrical equipment
Application suitability should be confirmed according to current, voltage, temperature, short-circuit force, mounting method and insulation design.
Frequently Asked Questions
An inverted T-section copper profile is a one-piece conductive section with a horizontal base flange and a vertical web. It is used when the electrical or mechanical assembly requires a raised conductive section rather than a flat copper bar.
The profile can be designed as an integrated one-piece section. This may reduce the need for a separate brazed or bolted right-angle connection, provided the design and manufacturing route are suitable for the application.
Typical options include C11000, C10200, C10100, CW004A, CW008A, T2, TU1 and TU2. C10400, C10700 or C18150 may also be reviewed as separate alloy options when their different properties are required.
Yes. Web height, flange width, flange thickness, stem thickness and overall length can be designed according to the customer’s drawing. The final range depends on the selected material and production route.
An undercut or corner-relief feature can be reviewed at the web-to-flange junction. The groove dimensions, location and manufacturing feasibility should be defined on the drawing.
Depending on the design, production may involve extrusion, drawing, profile forming, CNC milling, drilling, tapping or wire EDM. The process is selected after reviewing the profile geometry, quantity and tolerance requirements.
Yes. Silver, tin or nickel plating may be reviewed for suitable applications. Plating type, thickness, coverage area and surface preparation should be included in the order specification.
Request a Quote
Please provide a 2D drawing or 3D model, material grade, applicable standard, web and flange dimensions, length, tolerance, temper, surface finish, plating requirement, quantity, application and required inspection documents. You can contact Cymber Metal for an RFQ.









