Cold-Drawn Bulb-Head and Cylindrical-Boss Pure Copper Contact Profile

Short Description:

Specification Details
Product Name Cold-Drawn Bulb-Head and Cylindrical-Boss Pure Copper Contact Profile
Product Type Tulip-contact receiver, pivot blade, stationary contact profile or retaining-rib copper block
Material Options C11000 ETP, C10200 OFC, C10100 OFHC, Cu-ETP, Cu-OF, T2, TU1 and TU2
Optional Materials C10400/C10700 silver-bearing copper or C18150 CuCrZr, subject to technical review
Applicable Standards ASTM B187/B187M, ASTM B152/B152M, ASTM B133, EN 13601, EN 13605, JIS H3140, JIS H3250 and GB/T 5585
Manufacturing Route Continuous casting, hot extrusion, complex-contour cold drawing, straightening and precision cutting
Total Profile Height Approximately 20–220 mm
Overall Profile Width Approximately 10–180 mm
Central Cylindrical Boss Approximately Ø8–100 mm
Thin Contact Blade Thickness Approximately 2.0–25.0 mm
Profile Features Semi-cylindrical bulb head, central boss, stop shoulders, thin blade and retaining ribs
Cut Block Length Approximately 15–1,000 mm
Bar Length Approximately 1,000–6,000 mm
Diameter Tolerance Typical target ±0.02–0.05 mm
Cylindricity and Symmetry Typical target ≤0.03 mm
Blade Flatness Typical target ≤0.03 mm
Blade Perpendicularity Typical target ≤0.03 mm
Contact-Face Roughness Typical target Ra ≤0.2–0.4 μm
Temper Options H02, H04 or O60, subject to grade and application
Indicative Hardness Approximately 90–125 HV for selected hard-tempers
Conductivity Target up to or above 98% IACS for applicable grades; verify by grade and test method
Surface Finish Bright copper, anti-tarnish passivation, full or selective silver plating, tin plating or nickel plating
Silver Plating Approximately 10–30 μm when specified; ASTM B700 can be referenced
Tin Plating Available according to customer requirement; ISO 2093 can be referenced
Nickel Plating Available according to customer requirement; ISO 1456 can be referenced
Secondary Operations Drilling, tapping, slotting, trimming, chamfering, deburring and selective surface finishing
Inspection Documents MTC, chemical analysis, conductivity, hardness, dimensional and plating reports when specified
Final Requirement All dimensions, tolerances and performance values are subject to the approved drawing and technical review

Product Detail

Product Tags

Video

Short Description

Cymber Metal supplies custom cold-drawn bulb-head and cylindrical-boss pure copper contact profiles for switchgear, disconnectors, earthing switches and other high-current electrical assemblies.

The profile can combine a semi-cylindrical bulb head, central cylindrical boss, cross-shaped stop shoulders, a thin conductive blade and bilateral retaining ribs in one continuous copper section. It can be supplied as a cut block, bar or finished component according to the approved drawing.

Product Overview

This complex pure copper profile is designed for conductive contact assemblies that require a combination of cylindrical support, controlled insertion geometry and mechanical retention. The integrated profile may be used as a tulip-contact receiver, rotating pivot blade, stationary contact base, retaining slot wedge or custom conductive insert.

Available grades include C11000 ETP, C10200 OFC, C10100 OFHC, Cu-ETP, Cu-OF, T2, TU1 and TU2. C10400/C10700 silver-bearing copper or C18150 CuCrZr can be reviewed when the application requires improved softening resistance, wear resistance or thermal performance.

For standard copper grades and conductive products, see our Pure Copper range. The complex section can be reviewed through Custom Copper Profile Extrusion, while drilling, tapping, selective machining and finishing can be discussed through Fine Machining.

The continuous profile route can avoid a separate brazed blade interface, but actual electrical, mechanical and cycle-life performance must be verified in the complete mating assembly.

Key Features

Feature Buyer Value
Integrated Complex Profile The bulb head, boss, blade and retaining features can be formed as one continuous copper section.
High-Conductivity Copper Suitable C11000, C10200 or C10100 grades can support low-resistance current transfer.
Cylindrical Pivot Surface The central boss can be designed for rotating contact, pivot or guided mating arrangements.
Bulb-Head Geometry A rounded or semi-cylindrical head can support controlled insertion into a tulip-contact assembly.
Thin Conductive Blade The blade section can be customized for contact engagement, switching or rotating applications.
Cross-Shaped Stop Shoulders Shoulders can help control insertion travel and component positioning.
Bilateral Retaining Ribs Rib geometry can be reviewed for pull-out resistance and positioning in an insulating base.
Continuous Metal Flow A drawn one-piece profile can avoid a separate brazed blade interface.
Complex-Contour Forming Multi-pass drawing can reduce the need for extensive multi-axis machining, subject to profile feasibility.
Precision Contact Faces Cylindrical and flat functional surfaces can be inspected for roundness, symmetry, flatness and roughness.
Surface Treatment Options Silver, tin or nickel plating can be evaluated for contact, wear and environmental requirements.
Custom Cut Lengths Profiles can be supplied as bars, cut blocks or finished components.

Manufacturing & Quality Control

The production route is selected according to the profile geometry, boss diameter, blade thickness, required tolerance, material grade, quantity and surface-treatment requirement.

Manufacturing Process

Process Stage Manufacturing Control Expected Output
Material Selection Grade, purity, conductivity, temper and certificate requirements are reviewed before production. Approved copper material with traceable heat information
Casting Upward continuous casting or another approved billet route is selected according to the material grade. Dense copper billet or feedstock
Hot Extrusion Heavy extrusion produces an intermediate section close to the required complex geometry. Stable preform with controlled density
Complex-Contour Drawing Multi-pass dies control the metal flow of the bulb head, boss, shoulders, blade and ribs. Near-net copper profile with integrated features
Intermediate Sizing Controlled reductions refine diameter, thickness, symmetry and surface quality. Dimensionally stable profile
Straightening Straightness and alignment are controlled after drawing. Straight bars suitable for cutting
Heat Treatment Hard-temper or annealed condition is selected according to the required mechanical properties. Specified hardness and workability
Cold Sawing Precision saws cut the profile into bars or finished blocks. Clean, square-cut components
Secondary Machining Drilling, tapping, trimming, chamfering and deburring are completed when required. Finished assembly-ready parts
Surface Treatment Anti-tarnish, silver, tin or nickel treatment can be applied to selected surfaces. Protected or contact-enhanced product
Cleaning Products are cleaned and dried to remove processing residue. Clean conductive components
Packaging Parts are separated and protected against scratches, moisture and oxidation. Export-ready packaging

Complex-contour drawing can reduce machining time and material waste compared with manufacturing the entire geometry from a solid block. Actual material utilization and cost benefits depend on profile design, tooling, order quantity and tolerance requirements.

Quality Control System

Inspection Item Control Method Documentation
Chemical Composition Optical emission spectroscopy or an agreed material test method Chemical analysis report / MTC
Material Traceability Heat number and batch records maintained through all production stages Traceability records
Conductivity Digital conductivity meter or agreed conductivity test method Conductivity test data
Hardness Vickers or another agreed hardness method Hardness report
Boss Diameter Micrometers, optical measurement or CMM Diameter inspection record
Cylindricity CMM, roundness instrument or optical profile measurement Cylindricity report
Profile Symmetry CMM or optical projector measurement Symmetry inspection data
Thin-Blade Thickness Precision micrometers or CMM Critical dimension record
Blade Flatness and Perpendicularity CMM, optical measurement or dedicated fixture Geometry inspection report
Retaining-Rib Dimensions CMM, profile gauge or optical measurement Rib and shoulder inspection record
Contact-Face Roughness Profilometer measurement Roughness report when required
Internal Soundness Ultrasonic testing on thick or critical sections when specified UT report
Plating Thickness Coating-thickness measurement for silver, tin or nickel surfaces Plating inspection report
Surface Condition Visual inspection for cracks, burrs, scratches, oxidation and tool marks Visual inspection checklist
First-Article Inspection Full dimensional inspection before batch production when required FAI report
Shipment Documents Documents supplied according to the purchase order EN 10204 3.1 certificate and dimensional report when specified
Quality System Production and inspection controls operated under the applicable ISO 9001 quality system Records available through Quality Assurance

Typical Applications

Application Typical Use Design Considerations
MV Withdrawable Switchgear Bulb-head tulip-contact receivers and conductive pivot parts Voltage class, contact pressure, insertion alignment and temperature rise
LV Draw-Out Switchgear Integrated pivot blades and stationary contact components Blade thickness, travel, insulation clearance and mechanical support
High-Voltage Disconnectors Rotating copper blades and pivot-contact assemblies Rotation angle, current, contact force and environmental exposure
Earthing Switches Conductive pivot and contact components Grounding current, mechanical movement and corrosion protection
Air Circuit Breakers Bulb-head plug-in contact blocks and high-current contact inserts Contact pressure, arc exposure, heat rise and plating
Vacuum Circuit Breakers Copper contact supports and conductive connection profiles Assembly space, current rating and system-level testing
Generator Slot Wedges Anti-pull-out copper slot wedges with retaining ribs Retention, vibration, insulation interface and dimensional stability
Traction Motors Conductive retaining profiles and custom copper inserts Vibration, thermal cycling and installation clearances
High-Current Rotating Joints Cylindrical pivot surfaces and integrated conductive blades Rotation frequency, wear, lubrication and contact resistance
Industrial Power Equipment Custom complex-profile copper conductors Drawing review, current load, heat dissipation and mounting method

FAQ

What is a bulb-head copper contact profile?

It is a custom conductive copper profile with a rounded or semi-cylindrical head designed for a tulip-contact, plug-in or guided mating assembly. The profile may also include a central boss, shoulders, a thin blade or retaining ribs.

Which copper grades can be used?

Common options include C11000, C10200, C10100, Cu-ETP, Cu-OF, T2, TU1 and TU2. C10400/C10700 silver-bearing copper or C18150 CuCrZr may be considered when the application requires higher softening resistance or wear performance.

Can the boss, blade and ribs be produced in one piece?

Yes. The profile can be developed as an integrated section through extrusion and multi-pass cold drawing, followed by cutting and secondary machining where required. Final feasibility depends on the cross-section and tolerance.

Is this product suitable for switchgear tulip contacts?

It can be evaluated for LV/MV draw-out switchgear, air circuit breakers and other tulip-contact arrangements. The complete design must be checked for voltage, current, contact pressure, insertion travel, insulation clearance and heat rise.

What is the purpose of the retaining ribs?

Bilateral ribs can help position the copper profile inside an insulating base and may improve resistance to pull-out or vibration. Their actual retention performance depends on the base material, interference, assembly method and operating conditions.

Can the copper profile be used as a rotating pivot blade?

Yes, a cylindrical boss and thin blade can be designed for rotating disconnectors or other pivot-contact assemblies. Rotation load, wear, contact force, lubrication and cycle requirements should be reviewed before final material selection.

Can the contact surfaces be silver plated?

Yes. Full or selective silver plating can be considered for contact surfaces. Typical thickness may be approximately 10–30 μm, but the final value depends on current, wear, contact pressure, environment and the customer specification.

What inspection documents are available?

Depending on the order, documents may include MTC, chemical analysis, conductivity data, hardness records, dimensional reports, profile measurements, ultrasonic testing, plating records and third-party inspection documents.

Request a Quote

Required Information Details to Provide
Product Type Tulip-contact receiver, pivot blade, retaining profile or custom conductive insert
Drawing 2D drawing, 3D CAD file or dimensioned sketch
Copper Grade C11000, C10200, C10100, T2, TU1, TU2 or another specified grade
Profile Geometry Boss diameter, bulb radius, blade thickness, shoulder width and rib dimensions
Overall Dimensions Height, width, length and critical clearances
Tolerance Diameter, cylindricity, symmetry, blade flatness, perpendicularity and surface roughness
Temper H02, H04, O60 or another specified condition
Surface Bright copper, anti-tarnish, silver, tin, nickel or selective plating
Processing Cutting, drilling, tapping, trimming, chamfering, deburring or marking
Application Switchgear, disconnector, earthing switch, generator, motor or rotating joint
Electrical Requirement Current, voltage, conductivity, heat rise and duty cycle
Mechanical Requirement Insertion force, rotation angle, contact pressure, vibration or cycle requirement
Quantity Prototype, sample, trial order, batch quantity or annual demand
Inspection MTC, conductivity, hardness, dimensional, profile, UT, plating or third-party inspection
Delivery Details Destination country, packing requirements and target schedule
Contact Contact Cymber Metal for an RFQ

  • Previous:
  • Next:

  • Write your message here and send it to us