C-Type Copper Clamp Profiles & C-Tap Connector Blanks
Video
Short Description
Custom C-type copper clamp profiles with twin-arc internal grooves for connector manufacturing. Available as profile bars or cut-to-length blanks, with material condition, groove geometry and optional plating specified to suit the approved design.
C-Type Copper Clamp Profile Overview
A C-type copper clamp profile is an open copper section with two curved internal seating areas separated by a longitudinal ridge. This geometry provides a starting form for connector bodies designed to accommodate parallel conductors or main-and-tap connections.
Cymber Metal supplies these profiles in selected pure copper grades for drawing-based orders. Finished connection performance depends on the conductor combination, material condition, connector dimensions and installation method—not the profile shape alone.
Key Features
- Twin-arc internal geometry: Configurable for equal-size or unequal-size conductor arrangements.
- Open C-shaped section: Provides a starting profile for customer-designed clamping or compression components.
- Application-specific material condition: Selected for subsequent forming, crimping or mechanical use.
- Flexible finishing: Profile stock, cut blanks and additional machining or plating options.
Manufacturing & Quality Control
| Stage | Scope |
|---|---|
| Material Selection | Confirm copper grade, material condition and required electrical or mechanical properties |
| Profile Production | Select the appropriate copper profile extrusion and drawing route according to section geometry |
| Condition Control | Specify annealing or retained work hardening according to the intended application |
| Cutting & Finishing | Cut to length and deburr; additional precision machining or plating as agreed |
| Inspection | Check critical dimensions, surface condition, conductivity and hardness according to the inspection plan |
| Documentation | Provide material certificates and inspection records according to the agreed order specification |
See our quality assurance approach for inspection and documentation support. Sample crimp evaluation and finished-connection testing should be defined separately where required.
Typical Applications
| Application | Intended Use |
|---|---|
| Grounding & Bonding Hardware | Profile stock or blanks for customer-designed copper connector bodies |
| Main-and-Tap Connections | Twin-groove sections configured for specified conductor combinations |
| Electrical Equipment | Custom conductive clamp bodies and related components made to approved drawings |
FAQ
It is an open copper profile with curved internal seating areas. It can be supplied in bar form or cut into blanks for subsequent connector manufacturing and assembly.
Not necessarily. Profile stock and cut blanks are intermediate products. A finished connector requires confirmed conductor compatibility, installation requirements and any applicable performance testing.
C11000, C10200 and C10100 are options for review. Crimping applications generally require suitable ductility, while other applications may need a harder condition. Selection should follow the drawing and forming requirements.
Yes, unequal groove geometries can be reviewed for main-and-tap arrangements. Specify the conductor material, actual diameter, strand construction and required seating geometry rather than nominal cross-sectional area alone.
Tin or silver plating can be specified, subject to technical review. Define the coating standard, thickness, coverage and inspection requirements before ordering.
Tolerances depend on profile size, opening width, groove radii, wall thickness, material condition and finishing route. Critical dimensions should be identified on the drawing for manufacturability review.
No. Material conformity does not establish UL listing or finished-connection compliance. The applicable requirements and tests must be determined for the complete connector and its intended use.
Direct copper-to-aluminum use should not be assumed. Such connections require a validated design addressing material compatibility, corrosion protection, contact stability and the specified installation method.
Request a Quote
Contact Cymber Metal with your drawing, copper grade, material condition, conductor details, dimensions, tolerances, quantity, surface treatment, application, required tests and documents, delivery destination and target schedule. For crimped connectors, include the proposed tooling and die information where available.










