Cold-Drawn Three-Tier Stepped Copper Profile

Short Description:

Item Specification
Product Name Cold-Drawn Three-Tier Stepped Copper Profile
Cross-Section Raised central land, bilateral intermediate shoulders, thinner outer wings and a flat back
Standard Geometry Symmetrical three-tier section with two step transitions on each side
Custom Geometry Step widths, heights, root radii and asymmetric variants subject to drawing review
Material Options C11000 ETP copper, C10200 oxygen-free copper or C10100 oxygen-free electronic copper
Other Grade Designations Cu-ETP/CW004A, Cu-OF/CW008A, T2, TU1 or TU2 may be reviewed under their respective specifications; equivalence is not assumed
Reference Standards ASTM B187/B187M or EN 13605 where applicable to the ordered grade and form; final requirements per purchase specification
Overall Width Indicative range: 18–280 mm
Total Center Thickness Indicative range: 4–50 mm
Outer Wing Thickness Indicative range: 1–15 mm
Cut Blank Length Indicative range: 20–1,200 mm
Straight Bar Length Indicative range: 1,000–6,000 mm
Step Height and Thickness Tolerance Selected-feature targets of ±0.015–0.04 mm, subject to review; final machining may be required
Face Parallelism Target of 0.02 mm for individually specified step faces relative to the back datum, subject to measurement span and process confirmation
Left-to-Right Symmetry Target of 0.03 mm, with center reference and inspection method defined by drawing
Back Flatness Target of 0.02–0.04 mm over an agreed 100 mm span; full-length flatness specified separately
Surface Roughness Ra ≤0.4 μm target on nominated functional surfaces, subject to finishing requirements
Temper H02, H04 or O60 where applicable to the selected material standard
Hardness Indicative 85–120 HV for selected cold-worked conditions; annealed material specified separately
Electrical Conductivity A target of ≥98% IACS may be specified for suitable pure copper grades and conditions, subject to verification
Thermal Conductivity Required value, material condition and test temperature to be agreed for thermal applications
Surface Options Uncoated copper, specified anti-tarnish treatment, nickel plating, silver plating or tin plating
Secondary Processing Cutting, drilling, tapping, local milling, deburring and specified surface finishing
Supply Condition Profile stock, cut blanks or drawing-based finished components
Documentation Material certificates and agreed dimensional, conductivity or coating inspection records
Packaging Protective separation and packing appropriate to surface condition, wing geometry and shipment requirements

Product Detail

Product Tags

Video

Short Description

This stepped copper profile features a raised central section, intermediate shoulders and thinner outer wings on both sides, creating three thickness levels above a flat back. It can be supplied as profile bars, cut-to-length blanks or components with drawing-based secondary machining.

Material options include C11000, C10200 and C10100. Potential applications include multi-level busbar connections, power-module heat-spreader blanks and stepped cover blanks for liquid-cooling assemblies. Grade, temper, dimensional tolerances, surface finish and coating requirements are confirmed against the customer drawing.

Product Overview: Stepped Copper Profile

A stepped copper profile combines several thickness levels within one solid cross-section. This symmetrical design has a broad central land, two intermediate shoulders and two outer wings, providing five face zones at three different heights.

The geometry can accommodate drawing-defined locating shoulders, overlapping joints or conductive connections at different levels. The flat back can serve as a mounting or thermal-interface surface when its finish and flatness are specified for that purpose.

Cymber Metal supports drawing-based enquiries within its pure copper product range. A near-net profile route can reduce the amount of contour machining compared with starting from rectangular stock, although material savings and finishing requirements depend on geometry, tooling and order quantity.

For thermal assemblies or joined covers, the profile is a component blank rather than a complete cooling system. Thermal performance, joint strength and leak tightness must be established through the final assembly design and validation.

Key Features

Feature Product Value
Three Thickness Levels Provides multiple drawing-defined interface heights within one solid section
Bilateral Stepped Shoulders Can support locating, overlapping or seating functions where incorporated into the assembly design
Raised Central Section Provides a thicker central region for specified conductive, thermal or machining requirements
Flat Back Offers a potential mounting or thermal-interface surface when flatness and finish are controlled
Integrated Profile Avoids assembling separate strips solely to create the stepped cross-section
Near-Net Forming Option Can reduce contour machining and material removal for suitable production quantities
Custom Finishing Supports drawing-defined holes, threads, local machining and selective coatings

Manufacturing & Quality Control

Manufacturing Process

The production route is selected after reviewing the section proportions, wing thickness, material condition and critical dimensions. Custom copper profile extrusion can be combined with cold drawing and secondary machining where appropriate.

Stage Process Main Control Points
Drawing Review Assess the stepped cross-section and functional requirements Width-to-thickness proportions, step heights, root radii, datums and finishing allowance
Material Selection Select material to the agreed grade and standard Composition, oxygen requirements where applicable, temper and traceability
Initial Profile Forming Establish the stepped section through a suitable extrusion route Central thickness, shoulder geometry, outer-wing formation and section consistency
Cold Drawing Refine dimensions and material condition through controlled reductions Step dimensions, surface condition, work hardening and section distortion
Straightening and Condition Control Apply suitable straightening and, where specified, annealing Bow, twist, back flatness and final temper
Cutting and Secondary Machining Cut to length and produce drawing-defined features Cut squareness, holes, threads, local dimensions and functional surfaces
Surface Treatment Apply agreed cleaning, anti-tarnish treatment or plating Surface preparation, coating specification, masking and dimensional allowance
Final Inspection and Packing Check agreed characteristics and protect for shipment Inspection records, identification, edge protection and surface separation

Annealing and stress relief are not interchangeable specifications. Any thermal treatment must be selected according to the required final properties.

For components requiring tighter interface control or additional features, precision copper machining can be reviewed as part of the finishing route.

Quality Control System

Inspection methods, sampling frequency and acceptance criteria are agreed before production. The Quality Assurance page provides related information on inspection support.

Inspection Item Method or Record Acceptance Basis
Material Identity Certificate review and agreed chemical analysis Ordered grade and applicable material specification
Oxygen Content Suitable oxygen-analysis method, such as inert-gas fusion, when required Grade-specific or customer-defined oxygen limit
Electrical Conductivity Calibrated conductivity measurement Agreed IACS requirement, material condition and temperature correction
Hardness Vickers hardness testing where specified Selected temper and agreed test locations
Step Geometry Optical measurement, profile comparison or suitable CMM inspection Step widths, heights, root radii and drawing datums
Parallelism and Symmetry Suitable dimensional measurement and fixtures Individually defined face relationships and center references
Back Flatness Suitable surface-plate or coordinate measurement method Agreed inspection span, support condition and full-part requirements
Surface Condition Visual inspection and roughness measurement where specified Limits for burrs, scratches, dents and functional surface finish
Coating Quality Thickness measurement and additional tests where requested Agreed coating type, coverage, adhesion and acceptance criteria
Internal Examination Ultrasonic examination when requested and technically suitable Geometry-dependent coverage and agreed acceptance criteria
Documentation Batch identification and agreed inspection reports Purchase-order traceability and reporting requirements

Routine metallic-element analysis alone should not be treated as proof of low oxygen content. EN 10204 3.1 documentation, first-article inspection and third-party inspection should be requested before order confirmation.

Typical Applications

These are potential drawing-based applications. Final suitability depends on the complete electrical, thermal or mechanical assembly.

Application Typical Use Design Considerations
Power Module Thermal Assemblies Stepped heat-spreader or baseplate blanks for IGBT and SiC module systems Thermal resistance, interface flatness, mounting pressure and thermal cycling
Liquid Cold Plate Assemblies Stepped cover or locating blanks for a separately engineered cooling assembly Joint geometry, joining procedure, distortion, coolant compatibility and leak testing
Switchgear Busbar Connections Multi-level conductive transitions or stepped lap-joint components Contact area, fastening force, temperature rise and insulation coordination
Energy Storage and Renewable Power Equipment Custom conductive or thermal-interface parts in converters and power distribution assemblies Current duty, operating temperature, vibration and service environment
Generator Components Drawing-defined stepped conductive or retaining parts Electromagnetic forces, insulation, mechanical retention and fatigue requirements

A stepped joint does not by itself establish leak tightness. Likewise, a longer surface contour does not automatically establish an acceptable creepage distance; insulation design must consider the complete assembly.

Frequently Asked Questions

What is a three-tier stepped copper profile?

It is a solid copper section with three thickness levels: a raised center, intermediate shoulders and thinner outer wings. In this symmetrical design, those levels create five face zones above a flat back. Dimensions and corner details are defined by the customer drawing.

How is it different from a standard flat copper bar?

A flat bar normally has a uniform rectangular section. This profile incorporates thickness changes across its width, which can provide different interface heights or locating shoulders without assembling separate strips. Whether it offers a production advantage depends on quantity, tooling and finishing requirements.

Can it be used as a liquid cold plate cover?

It can be reviewed as a cover blank or locating component, but it is not a complete cold plate. Channel design, joining surfaces, sealing method, pressure resistance and coolant compatibility require separate engineering. The finished assembly must undergo the specified validation and leak testing.

Which copper grade should be selected?

C11000, C10200 and C10100 are options for review. Selection depends on electrical and thermal requirements, material condition, joining process and documentation. Where low oxygen is required, specify the oxygen-free grade explicitly rather than treating every pure copper grade as interchangeable.

Are the five stepped faces on the same plane?

No. They occupy three different height levels. Individual faces may be required to run parallel to the back datum, while corresponding left and right shoulders may have additional alignment requirements. These relationships need separate dimensions or geometric tolerances on the drawing.

Does cold drawing eliminate machining and distortion?

No. Cold drawing can form the basic section and reduce subsequent material removal, but it does not guarantee a tool-mark-free surface or distortion-free part. Tight flatness, roughness or interface tolerances may still require straightening, machining or other finishing operations.

Can nickel, silver or tin plating be specified?

These coatings can be reviewed for the intended application. Specify the coating process, thickness, undercoat, masked areas and inspection requirements. Joining and thermal-interface surfaces may require different preparation, so coating selection should account for the complete manufacturing and assembly sequence.

What information is needed for a quotation?

Provide a dimensioned drawing, material grade, temper, quantity, critical tolerances and surface requirements. For thermal or joined assemblies, include operating temperatures, joining details and validation requirements. Documentation, destination, packaging and requested delivery timing should also be included.

Request a Quote

Send your drawing for a review of material selection, profile-forming feasibility, secondary machining and inspection requirements.

Required Information Details to Provide
Drawing Dimensioned 2D drawing and available STEP model, including revision identification
Material Grade, standard, temper and any oxygen-content requirement
Cross-Section Overall width, center thickness, wing thickness, step widths, heights and root radii
Length and Quantity Finished length, prototype quantity, production batch and estimated repeat demand
Critical Tolerances Datums, face parallelism, symmetry, flatness span and functional surface roughness
Operating Conditions Current, temperature, mounting load, thermal cycling and service environment
Joining Requirements Brazing, welding, mechanical fastening or other assembly process
Surface Treatment Coating type, thickness, undercoat, masked areas and post-treatment dimensions
Inspection Documents Material certificate, conductivity results, dimensional report or first-article requirements
Delivery Requirements Destination, protective packaging and requested delivery schedule

Contact Cymber Metal for a drawing-based quotation.


  • Previous:
  • Next:

  • Write your message here and send it to us