Cold-Drawn Asymmetric Offset Inverted T-Section Pure Copper Profile Bar

Short Description:

Specification Details
Product Name Cold-Drawn Asymmetric Offset Inverted T-Section Pure Copper Profile Bar
Product Type Unequal-flange conductor rail, keyed copper contact track or asymmetric copper profile
Material Options C11000 ETP, C10200 OFC, C10100 OFHC, Cu-ETP, Cu-OF, T2, TU1 and TU2
Optional Materials C10400/C10700 silver-bearing copper or C18150 CuCrZr, subject to technical review
Applicable Standards ASTM B187/B187M, ASTM B152/B152M, ASTM B133, EN 13601, EN 13605, JIS H3140, JIS H3250 and GB/T 5585
Manufacturing Route Continuous extrusion, asymmetric cold drawing, multi-roll straightening and precision cutting
Overall Base Width Approximately 5.0–150.0 mm
Total Profile Height Approximately 4.0–100.0 mm
Flange Configuration Narrow micro-lip plus wider mounting flange, with W1 not equal to W2
Central Boss Square or rectangular conductive boss; dimensions according to drawing
Optional Geometry Unequal-thickness step flanges, offset boss, locating lip, keyway or custom retaining features
Supply Form Cut segments approximately 15–1,500 mm, bars approximately 1,000–6,000 mm or coil supply when feasible
Boss and Flange Tolerance Typical target ±0.015–0.03 mm
Full-Length Straightness/Camber Typical target ≤0.2–0.3 mm per meter
Base Flatness Typical target ≤0.02 mm
Root Radius Typical target R ≤0.15–0.25 mm
Surface Roughness Typical target Ra ≤0.2–0.4 μm
Temper Options H02, H04 or O60
Indicative Hardness Approximately 90–125 HV for selected hard-tempers
Conductivity Target up to or above 98% IACS for applicable grades; verify by grade and test method
Surface Finish Bright copper, mirror-bright copper, anti-tarnish passivation, silver plating, tin plating or nickel plating
Silver Plating Full or selective plating according to the contact area; ASTM B700 can be referenced
Tin Plating Available according to customer requirement; ISO 2093 can be referenced
Nickel Plating Available according to customer requirement; ISO 1456 can be referenced
Secondary Operations Drilling, tapping, slotting, chamfering, deburring, marking and cut-to-length processing
Inspection Documents MTC, chemical analysis, conductivity, hardness, dimensional and plating reports when specified
Final Requirement Final dimensions, asymmetry, straightness and tolerances are subject to drawing review

Product Detail

Product Tags

Video

Short Description

Cymber Metal supplies cold-drawn asymmetric offset inverted T-section pure copper profile bars with a narrow positioning lip, a wider mounting flange and a central conductive boss.

The unequal-flange design can help control installation orientation in keyed slots, insulating bases, busway tracks and motor or generator assemblies. Profiles can be supplied in C11000, C10200, C10100, Cu-ETP, Cu-OF, T2, TU1 or TU2, with optional silver, tin or nickel plating according to the application.

Product Overview

This asymmetric pure copper profile is designed for assemblies where the two sides of the section must not be interchangeable. The narrow micro-lip can position the profile close to an enclosure edge, while the wider flange provides a larger clamping or retaining surface. The central square or rectangular boss remains the primary conductive section.

Typical uses include Poka-Yoke contact rails, keyed conductor bars, switchgear contact tracks, compact busway conductors, motor rotor slot wedges and custom locating busbars.

For standard copper grades and conductive products, see our Pure Copper product range. The asymmetric section can be reviewed through Custom Copper Profile Extrusion, while cutting, drilling, tapping and other secondary operations can be discussed through Fine Machining.

All dimensions and performance values below are indicative enquiry ranges. Final values must be confirmed by the approved drawing, material grade and inspection method.

Key Features

Feature Buyer Value
Asymmetric Inverted T-Section Creates a keyed geometry that helps prevent incorrect orientation during installation.
Narrow Positioning Lip Allows the profile to fit close to an enclosure edge or restricted slot wall.
Wide Mounting Flange Provides additional clamping, support and retaining area.
Central Conductive Boss Maintains the primary current-carrying section without unnecessary holes or interruptions.
Poka-Yoke Geometry The unequal sides can support one-way assembly and reduce the risk of reverse installation.
Cold-Drawn Surface Supports consistent profile dimensions, straightness and surface quality.
High-Purity Copper Options C11000, C10200 and C10100 can be reviewed for conductivity-focused designs.
Continuous Conductive Face The profile can be supplied without a separate joined or brazed conductive strip.
Controlled Camber In-line straightening can help maintain installation stability over the full bar length.
Custom Offset Design Boss position, flange width, lip height and asymmetry can be developed according to drawing.
Flexible Supply Form Available as cut segments, straight bars or coil where the section and temper permit.
Plating Compatibility Silver, tin or nickel plating can be evaluated for contact and environmental requirements.

Manufacturing & Quality Control

The manufacturing route is selected according to the unequal-flange geometry, boss size, straightness requirement, material grade, temper, quantity and surface-treatment requirement.

Manufacturing Process

Process Stage Manufacturing Control Expected Output
Material Selection Copper grade, purity, conductivity, temper and certificate requirements are reviewed. Approved copper feedstock with traceable heat information
Casting Upward continuous casting or another approved billet route is used according to grade. Dense copper billet or feedstock
Continuous Extrusion The billet is formed into a preliminary rectangular or T-related section. Stable intermediate profile
Asymmetric Die Design Differential bearing lengths control the narrow lip, central boss and wide flange. Balanced metal flow through the unequal section
Multi-Pass Cold Drawing Controlled reductions refine flange width, boss dimensions, surface finish and straightness. Near-net asymmetric copper profile
In-Line Straightening Orthogonal or multi-roll straightening controls camber and lateral bow. Straight profile suitable for assembly or cutting
Heat Treatment Hard-temper or annealed condition is selected according to the required application. Specified hardness and workability
Cold Sawing Precision saws cut the bar into finished lengths or segments. Clean, square-cut components
Secondary Machining Drilling, tapping, slotting, trimming and deburring are completed as required. Assembly-ready conductive rail
Surface Treatment Anti-tarnish, silver, tin or nickel treatment can be applied to selected surfaces. Protected or contact-enhanced profile
Cleaning and Protection Profiles are cleaned, dried and protected against oxidation. Clean export-ready product
Packaging Bars and cut pieces are separated to avoid scratches, dents and deformation. Secure packaging for transport

Asymmetric cold drawing can reduce the amount of machining compared with milling unequal flanges from solid bar. The actual material utilization, tooling requirement and cost benefit depend on the profile shape, production quantity and tolerance.

Quality Control System

Inspection Item Control Method Documentation
Chemical Composition Optical emission spectroscopy or an agreed material test method Chemical analysis report / MTC
Heat Traceability Heat number and batch records maintained through all stages Material traceability record
Conductivity Digital conductivity meter or agreed conductivity test method Conductivity test data
Hardness Vickers or another agreed hardness method Hardness report
Flange Widths Optical profile projector, CMM or dedicated gauges Left/right flange inspection record
Boss Offset CMM or optical profile measurement Offset and center-position data
Root Radius Optical measurement or CMM Radius inspection record
Straightness and Camber Granite surface plate, straightedge, laser or dedicated fixture Full-length straightness report
Base Flatness Granite surface plate, CMM or flatness gauge Flatness inspection data
Surface Roughness Profilometer measurement Roughness report when required
Internal Soundness Ultrasonic testing for thick or critical sections when specified UT report
Plating Thickness Coating-thickness measurement for silver, tin or nickel Plating inspection report
Surface Condition Visual inspection for cracks, burrs, scratches, oxidation and tool marks Visual inspection checklist
First-Article Inspection Full profile and dimensional inspection before batch production when required FAI report
Shipment Documents Documents supplied according to the purchase order EN 10204 3.1 certificate and dimensional report when specified
Quality System Production and inspection controls operated under the applicable ISO 9001 quality system Records available through Quality Assurance

Typical Applications

Application Typical Use Design Considerations
LV Circuit Breakers Keyed stationary contact rails and conductive mounting profiles Contact pressure, insulation clearance and installation orientation
MV Switchgear Asymmetric contact tracks and conductor rails Voltage class, creepage distance, heat rise and mechanical support
Disconnectors Offset copper profiles for moving or stationary contact assemblies Travel, alignment, contact force and environmental exposure
Contactors One-way conductive rails and internal copper connection profiles Switching duty, current, plating and electrical clearance
Sandwich Busways Asymmetric conductor bars and sliding contact tracks Slot geometry, thermal expansion and current distribution
Automated Sliding Contacts Keyed copper rails for guided electrical movement Rail straightness, friction, wear and contact pressure
Motor Rotor Slot Wedges Eccentric copper slot wedges and retaining profiles Rotor speed, vibration, retention and insulation interface
Generator Assemblies Conductive locating bars and custom slot components Mechanical loading, heat rise and dimensional stability
EV Power Distribution Units Compact locating busbars and asymmetric connection profiles Space, current rating, insulation and service access
EV Inverters Custom copper conductor rails and mounting sections Thermal cycling, vibration and plating requirements
Industrial Control Cabinets One-way assembly rails and conductive support profiles Mounting method, hole pattern and maintenance access

FAQ

What is an asymmetric inverted T copper profile?

It is a copper profile with an inverted T-like section in which the two flanges are intentionally unequal. One side may have a narrow positioning lip while the other has a wider mounting flange, allowing the part to fit a keyed slot in only one orientation.

Which copper grades are available?

Common grades include C11000, C10200, C10100, Cu-ETP, Cu-OF, T2, TU1 and TU2. C10400/C10700 silver-bearing copper and C18150 CuCrZr may be reviewed for higher temperature or mechanical requirements.

What is the purpose of the unequal flanges?

The unequal flanges can provide orientation control, edge clearance and a larger clamping surface. This is useful for Poka-Yoke assemblies, insulating bases, busway tracks and motor or generator slot components.

Can the copper profile be made with an offset boss?

Yes. The central conductive boss can be positioned symmetrically or eccentrically according to the drawing. Boss position, flange width, lip height and root radius should be defined as critical dimensions.

Can this profile be used for motor rotor slot wedges?

It can be evaluated for rotor or generator slot-wedge applications. The final design must be checked for rotor speed, vibration, centrifugal force, thermal expansion, insulation clearance and retention method.

What straightness can be achieved?

An indicative target is approximately 0.2–0.3 mm per meter for full-length straightness or camber. The achievable value depends on profile size, temper, length, straightening route and inspection method.

Can the profile be silver plated?

Yes. Full or selective silver plating can be evaluated for contact surfaces. Plating thickness, coverage, adhesion and masking should be specified according to current, wear, temperature and environmental conditions.

What information is required for quotation?

Please provide the 2D/3D drawing, material grade, flange dimensions, boss position, length, tolerance, temper, surface treatment, quantity, application and required inspection documents.

Request a Quote

Required Information Details to Provide
Product Type Asymmetric T-bar, keyed conductor rail, contact track, slot wedge or custom profile
Drawing 2D drawing, 3D CAD file or dimensioned sketch
Copper Grade C11000, C10200, C10100, T2, TU1, TU2 or another specified grade
Profile Geometry Overall width, height, lip width, flange width, boss position and root radius
Length Coil, bar length, cut segment or finished component length
Tolerance Boss width, flange width, offset, flatness, straightness, camber and surface roughness
Temper H02, H04, O60 or another specified condition
Surface Bright copper, anti-tarnish, silver, tin, nickel or selective plating
Processing Cutting, drilling, tapping, slotting, chamfering, deburring or marking
Application Switchgear, contactor, busway, motor, generator, EV PDU or inverter
Electrical Requirement Current, voltage, conductivity, temperature rise and duty cycle
Mechanical Requirement Clamping force, vibration, sliding movement, retention or rotor speed
Quantity Prototype, sample, trial order, batch quantity or annual demand
Inspection MTC, conductivity, hardness, dimensional, straightness, plating or third-party inspection
Delivery Details Destination country, packing requirements and target schedule
Contact Contact Cymber Metal for an RFQ

  • Previous:
  • Next:

  • Write your message here and send it to us