Cold-Drawn Hook-Shaped Copper Profile Block

Short Description:

Item Specification
Product Name Cold-Drawn Hook-Shaped Copper Profile Block
Cross-Section Extended flat connection leg, enlarged hooked head, curved inner transition and concave relief groove
Material Options C11000 ETP copper, C10200 oxygen-free copper or C10100 oxygen-free electronic copper
Other Grade Designations Cu-ETP/CW004A, Cu-OF/CW008A, T2, TU1 or TU2 may be reviewed against their respective specifications; grades are not automatically interchangeable
Reference Standards ASTM B187/B187M or EN 13605 where applicable to the ordered grade and product form; requirements confirmed in the purchase specification
Envelope Width × Height Indicative range: 15 × 15 mm to 180 × 180 mm; feasible width and height combinations require drawing review
Connection Leg Thickness Indicative range: 3–40 mm
Cut Block Length Indicative range: 12–800 mm
Straight Bar Length Indicative range: 1,000–6,000 mm, subject to section and handling requirements
Linear and Wall Thickness Tolerance Selected-feature targets of ±0.03–0.06 mm, subject to drawing and process confirmation
Curved Contour Accuracy Profile-of-a-line tolerance up to 0.05 mm may be reviewed for specified sections, datums and inspection conditions
Connection Leg Flatness Target of 0.03 mm may be reviewed over an agreed measurement span
Surface Roughness Ra 0.4–0.8 μm target on specified functional surfaces, subject to manufacturing route
Temper H02, H04 or O60 where applicable to the selected material standard
Hardness Indicative 85–125 HV for selected cold-worked conditions; not applicable to all grades or tempers
Electrical Conductivity A target of ≥98% IACS may be specified for appropriate pure copper grades and conditions, subject to verification
Surface Options Uncoated copper, specified anti-tarnish treatment, selective silver plating or tin plating
Silver Plating Thickness Indicative enquiry range: 5–30 μm; thickness, undercoat and coated areas defined by drawing
Secondary Processing Cutting, drilling, tapping, machining, deburring and application-specific finishing
Supply Condition Profile stock, cut blanks or drawing-based finished parts
Documentation Material certificates, dimensional reports and additional test records as agreed
Packaging Protective separation and packing selected to protect edges, surfaces and any plated areas

Product Detail

Product Tags

Video

Short Description

Hook-shaped copper profile blocks combine an extended flat connection leg, a thick curved head and an open concave relief groove in a single cross-section. They can be supplied as profile bars, cut-to-length blanks or components with drawing-based secondary machining.

Material options include C11000, C10200 and C10100, with temper, conductivity, dimensional tolerances and surface treatment specified for the application. Potential uses include circuit breaker stationary contact bases, arc-runner blanks and contoured conductive connections. Suitability for switching or arc-exposed service requires equipment-level validation.

Product Overview

A hook-shaped copper profile is a solid conductive section with an elongated connection arm and an enlarged curved end. Its concave opening can provide clearance around adjacent parts or accommodate a locating feature when defined by the assembly drawing.

The section can serve as a starting form for contact bases, arc-runner components and compact conductive transitions. Compared with machining the complete contour from rectangular stock, a suitably designed near-net profile can reduce material removal and subsequent contour-machining work. Actual savings depend on section complexity, tooling, quantity and finishing requirements.

Cymber Metal supports drawing-based enquiries within its pure copper product range. The final material, manufacturing route and inspection plan should be agreed before production.

Key Features

Feature Product Value
Integrated Hook-Shaped Section Combines a connection leg and curved head within one solid profile
Open Concave Relief Groove Can accommodate clearance or locating requirements defined by the assembly drawing
Conductive Copper Material Options Allows selection of grade and temper according to electrical, thermal and manufacturing requirements
Near-Net Profile Route Can reduce contour machining and material removal where tooling and production quantity justify the process
Cut-to-Length Supply Supports enquiries for both profile stock and individual component blanks
Drawing-Based Finishing Allows holes, threads, local machining and surface treatments to be specified separately
Defined Inspection Features Enables critical radii, contour dimensions, connection surfaces and plating zones to be identified before production

Manufacturing & Quality Control

Manufacturing Process

A production route is selected after reviewing the cross-section, material condition, quantity and critical features. Custom copper profile extrusion can be combined with cold drawing and secondary machining where technically appropriate.

Stage Process Main Control Points
Drawing and Process Review Review the profile, functional surfaces and intended assembly Section proportions, groove opening, radii, tolerances, datums and machining allowance
Material Selection Select copper stock or feedstock to the agreed grade Composition, material condition and traceability requirements
Profile Forming Establish the hook-shaped section through an approved extrusion and drawing route Metal flow, section consistency and accessible forming geometry
Cold Drawing Apply controlled reductions where required by the production plan Dimensions, surface condition and work-hardened material properties
Condition Adjustment Straighten and, where specified, anneal the material Straightness, temper and distortion control
Cutting and Secondary Machining Cut blanks and add drawing-defined holes, threads or local features Length, burrs, datum relationships and functional dimensions
Surface Treatment Apply agreed cleaning, anti-tarnish treatment or selective plating Surface preparation, coating thickness, masking and functional-zone requirements
Final Inspection and Packing Inspect against the agreed acceptance plan and protect for shipment Documentation, identification and prevention of surface or edge damage

For finished-component enquiries, precision copper machining can be reviewed alongside the profile-forming route.

Quality Control System

Inspection methods and sampling frequency should match the agreed critical characteristics. Further inspection context is available on the Quality Assurance page.

Inspection Item Method or Record Acceptance Basis
Material Identity Material certificate review and agreed composition testing Ordered grade and applicable material specification
Electrical Conductivity Suitable calibrated conductivity measurement Agreed IACS requirement, material condition and temperature correction
Hardness Vickers hardness testing where specified Selected grade, temper and agreed test locations
Cross-Section Geometry Optical measurement, profile comparison or suitable CMM inspection Drawing-defined contour, radii, groove dimensions and datums
Linear Dimensions and Flatness Suitable dimensional instruments and fixtures Specified tolerance, measurement span and inspection setup
Surface Condition Visual inspection and roughness measurement where required Agreed limits for burrs, scratches, surface defects and functional finish
Plating Quality Thickness measurement and additional coating tests where specified Agreed coating specification, coverage and acceptance criteria
Internal Examination Ultrasonic or other suitable examination when requested and technically feasible Geometry-dependent method, coverage and agreed acceptance criteria
Traceability and Reports Batch identification and agreed production or inspection records Purchase-order documentation requirements

EN 10204 3.1 documentation, first-article reports and third-party inspection should be requested before order confirmation. Ultrasonic examination is geometry-dependent and does not establish the absence of all microscopic defects.

Typical Applications

These are potential drawing-based applications, not declarations of approval for a particular breaker model, voltage or interruption duty.

Application Typical Use Design Considerations
Circuit Breaker Stationary Contact Bases Conductive base or support beneath a separately specified contact system Contact material, joining method, temperature rise and mechanical loading
Air Circuit Breaker Arc-Runner Components Profile blanks for drawing-defined arc runners or arc-horn bases Arc transfer, erosion, clearances and interruption testing
High-Current Contactors and Disconnectors Contoured conductive terminals or contact supports Contact pressure, duty cycle, connection resistance and operating temperature
Compact Busbar Assemblies Conductive transitions where adjacent parts require clearance Current distribution, insulation spacing, fastening and assembly access
DC Switching Equipment Custom conductive parts for engineered breaker or switching assemblies DC arc behaviour, polarity, insulation coordination and equipment-level validation

The hook contour alone does not establish compatibility with a moving-contact path, arc chute or magnetic blow-out system.

Frequently Asked Questions

What is a hook-shaped copper profile block?

It is a solid copper section with an extended connection leg and a curved head incorporating a concave opening. It can be supplied as profile stock, cut blanks or drawing-based components for conductive assemblies.

Is this a finished circuit breaker arc runner?

Not necessarily. The profile may be a blank requiring machining, joining, plating or other finishing. Its suitability as an arc runner must be confirmed against the equipment drawing and validated under the intended switching duty.

Which copper grades can be specified?

C11000, C10200 and C10100 are material options for review. EN and GB grades can also be considered under their own specifications. Grade selection should account for conductivity, material condition, joining requirements and documentation.

What does the concave groove do?

Depending on the assembly, it may provide clearance around an adjacent component or accommodate a locating feature. Its function, radius and position must come from the customer drawing rather than being assumed from the profile shape.

Can the component be silver-plated or tin-plated?

These finishes can be reviewed against the drawing. Specify coating thickness, undercoat, masked areas and acceptance requirements. Contact, brazing and arc-exposed areas may need different treatment, so blanket plating should not be assumed.

Are the listed tolerances guaranteed for every size?

No. They are enquiry targets requiring technical review. Feasibility depends on section size, temper, feature geometry, manufacturing route, datum definition and inspection method. Critical dimensions should be identified before quotation.

Can another copper alloy be used for elevated-temperature service?

Silver-bearing copper or CuCrZr may be reviewed as separate material options. They are not direct substitutes for pure copper, and conductivity, strength, processing and arc-exposure performance must be assessed for the selected grade and condition.

What information is needed for a quotation?

Provide a dimensioned drawing, material specification, temper, quantity, critical tolerances and surface requirements. For switching applications, include operating conditions, joining details and validation requirements, together with inspection documents, destination and delivery expectations.

Request a Quote

Send your drawing and requirements for a review of the material, profile-forming route, secondary processing and inspection scope.

Required Information Details to Provide
Drawing Dimensioned 2D drawing and, if available, a STEP model with revision identification
Material Grade, applicable standard, temper and required conductivity or hardness
Profile Geometry Overall section, leg thickness, groove radius, angles, fillets and cut length
Critical Requirements Tolerances, datums, flatness measurement span and functional surface finish
Quantity Prototype quantity, production batch and estimated repeat demand
Application Equipment type, current, temperature, mechanical load and any arc exposure
Secondary Processing Holes, threads, local machining, joining and finishing requirements
Coating Coating type, thickness, undercoat, masked areas and functional zones
Inspection Documents Material certificate, dimensional report, first-article inspection or third-party requirements
Delivery Destination, packing requirements and requested delivery schedule

Contact Cymber Metal for a drawing-based quotation.


  • Previous:
  • Next:

  • Write your message here and send it to us