Custom Dovetail Slotted Copper Profiles
Video
Short Description
Custom dovetail slotted copper profile featuring a narrow slot opening and wider undercut cavity for drawing-defined contact seats and mating inserts. Supplied as bars or cut sections, with material condition, slot geometry, machining and optional plating specified to suit the assembly.
Dovetail Slotted Copper Profile Overview
A dovetail slotted copper profile incorporates inward-projecting retaining lips along a longitudinal channel. Unlike an open U-channel, its undercut geometry can help capture a compatible insert against movement through the slot opening.
Cymber Metal supports pure copper material selection, custom profile processing and secondary machining. Retention strength, axial restraint and electrical contact performance depend on the mating component and complete assembly design.
Key Features
Undercut geometry for locating compatible inserts; customizable retaining lips and external section; bar or cut-section supply; optional machining and selective plating. Slot fit, insertion method and end retention are defined around the mating component.
Manufacturing & Quality Control
The processing route is selected according to section geometry, production quantity and required finish.
| Stage | Process / Control |
|---|---|
| Technical Review | Confirm material, slot geometry, mating component, tolerances and intended operating conditions |
| Profile Forming | Review custom copper profile extrusion and supported cold drawing where suitable for the section |
| Slot & Feature Finishing | Apply precision machining where required; undercut features may need dedicated form cutters and suitable access |
| Cutting & Edge Preparation | Cut to length and apply specified deburring, chamfers or end features |
| Dimensional Inspection | Check opening width, internal span, lip thickness, undercut geometry and specified straightness |
| Additional Verification | Conductivity, hardness, roughness, plating or mating-fit checks according to the agreed inspection plan |
| Protection & Documentation | Protect functional surfaces and supply agreed material and inspection records |
Inspection methods, sampling frequency and acceptance criteria are confirmed before production. Further information is available on our quality assurance page.
Typical Applications
| Application | Potential Use |
|---|---|
| Switchgear Contact Assemblies | Retaining seats for compatible spring or louver contact strips |
| Busway Plug-In Units | Custom conductive profiles incorporating contact-retaining slots |
| Power Connectors & Converters | Slotted connection bodies for drawing-defined contact assemblies |
| Industrial Conductor Systems | Custom conductor sections, subject to current, wear and mounting requirements |
FAQ
It is a copper section with a longitudinal undercut slot. Inward-projecting lips create an opening narrower than part of the internal cavity, allowing a suitably shaped insert to be captured within the channel.
A standard U-channel has an open mouth without retaining undercuts. Dovetail and T-slot geometries use different internal shapes. Their angles, lip dimensions and mating requirements are not interchangeable and should be defined by a cross-sectional drawing.
A compatible undercut can provide transverse capture, but axial movement may require end stops or other retention features. Fit, lip strength and assembly method must be reviewed. The retaining channel alone does not establish the required electrical contact pressure.
C11000 is commonly considered for general conductive components. C10200 and C10100 are oxygen-free options where oxygen content or joining conditions matter. Selection should follow the material standard, operating conditions and required mechanical and electrical properties.
Specify overall width and height, slot opening, internal span, depth, lip thickness, undercut angle and corner radii. Identify critical mating surfaces and whether dimensions apply before or after plating. Final tolerances require review of the complete section.
Yes, these requirements can be reviewed from your drawing. Please specify holes, threads, end features, plated areas, coating thickness and inspection criteria. Internal coating access and plating buildup must be considered when defining the finished fit.
No. Rounded surfaces can reduce local electric-field concentration compared with equivalent sharp edges, but corona behaviour depends on the complete assembly, voltage, clearances, insulation medium and surface condition. High-voltage suitability requires application-specific design verification.
Material certificates and dimensional reports can be specified with the order. Conductivity, hardness, plating and mating-fit reports depend on the agreed inspection scope. Any EN 10204 3.1, RoHS or REACH documentation requirement should be raised during enquiry for confirmation.
Request a Quote
Please contact Cymber Metal with your section drawing, copper grade, standard, material condition, length, tolerances and quantity. Include mating-contact details, insertion and retention requirements, surface treatment, operating conditions, required documents, destination and target delivery date.









