Solid Rectangular Copper Conductive Block
Video
Short Description
Cymber Metal supplies heavy-duty solid rectangular pure copper conductive blocks for high-current electrical connections, busbar transitions, switchgear, transformers and power distribution equipment.
The product range includes full-flat rectangular blocks, shallow compensation steps, deep half-lap profiles and rabbeted copper terminal blocks. Products can be supplied as cold-drawn profiles, extruded bars, cut blocks or precision-machined finished components according to the approved drawing.
Product Overview
These solid rectangular copper conductive blocks are designed for applications that require a large conductive cross-section, stable mechanical support and controlled contact geometry. The blocks may be used as busbar transition pads, terminal blocks, outgoing connection pieces, transformer conductors or custom conductive inserts.
Available materials include C11000 ETP, C10200 OFC, C10100 OFHC, Cu-ETP, Cu-OF, T2, TU1 and TU2. C10400/C10700 silver-bearing copper and C18150 CuCrZr can be evaluated where higher-temperature softening resistance or improved wear performance is required.
For standard copper grades and conductive products, see our Pure Copper product range. Custom stepped and rectangular sections can be reviewed through Custom Copper Profile Extrusion, while drilling, tapping, milling, cutting and other finishing operations can be discussed through Fine Machining.
A stepped block can help two busbars of different thicknesses sit at a more consistent level after assembly. The 90-degree step may also provide a lateral mechanical stop. Actual electrical resistance, short-circuit performance and temperature rise must be verified within the complete equipment design.
Key Features
| Feature | Buyer Value |
|---|---|
| Large Solid Cross-Section | Provides a substantial conductive path for high-current assemblies. |
| High-Purity Copper Options | C11000, C10200 and C10100 grades can be reviewed for conductivity-focused designs. |
| Full-Flat and Stepped Profiles | Supports flat terminal blocks, compensation steps and half-lap busbar joints. |
| Near-Net Profile Forming | Extrusion or cold drawing can reduce unnecessary machining compared with producing the entire shape from thick solid bar. |
| Single-Piece Construction | A one-piece stepped block can avoid the additional interface created by stacking separate copper shims. |
| Controlled 90-Degree Step | The step may provide a defined seating surface and lateral mechanical stop. |
| Custom Dimensions | Width, thickness, step depth, radius, length, holes and slots can be made according to drawing. |
| High Conductivity | Suitable copper grades can support low-resistance current transfer when correctly selected and installed. |
| Surface Treatment Options | Silver, tin or nickel plating can be evaluated for contact, wear and environmental requirements. |
| Precision Functional Faces | Parallelism, flatness and roughness can be inspected on critical contact surfaces. |
| Cut-to-Length Supply | Available as cut blocks, bars or finished components according to the required assembly length. |
| Traceable Production | Material and process records can be linked to the finished batch. |
Manufacturing & Quality Control
The production route is selected according to the cross-section, step geometry, tolerance, quantity, material grade and surface-treatment requirement. Full-flat blocks may be cut from heavy copper bar or plate, while stepped versions can be produced through near-net profile forming followed by precision finishing.
Manufacturing Process
| Process Stage | Manufacturing Control | Expected Output |
|---|---|---|
| Material Selection | Grade, purity, temper, conductivity and certificate requirements are reviewed before production. | Approved copper material with traceable heat information |
| Casting | Upward continuous casting or another approved billet route is used according to the selected grade. | Dense copper billet or feedstock with controlled chemistry |
| Hot Extrusion | Heavy extrusion forms a rectangular or stepped intermediate section. | Near-net copper profile with stable density |
| Cold Drawing | Multi-pass drawing through controlled dies refines width, thickness, straightness and surface quality. | Dimensionally controlled rectangular or stepped profile |
| Step Forming | The high face, low face and transition step are formed or finished according to the drawing. | Controlled compensation or half-lap geometry |
| Heat Treatment | Hard-temper drawing or annealing is selected according to the required mechanical condition. | Specified hardness and workability |
| Cold Sawing | Precision saws cut bars into required block lengths. | Clean, square cut blocks |
| CNC Machining | Drilling, tapping, milling, slotting, chamfering and deburring are completed as required. | Finished conductive block with assembly features |
| Surface Treatment | Anti-tarnish, silver, tin or nickel treatment can be applied when required. | Protected or contact-enhanced surface |
| Cleaning | Parts are cleaned and dried to remove machining residue and processing contamination. | Clean finished conductive components |
| Final Packaging | Blocks are separated and protected from scratches, impact and oxidation. | Export-ready packed products |
Quality Control System
| Inspection Item | Control Method | Documentation |
|---|---|---|
| Chemical Composition | Optical emission spectroscopy or an agreed material test method | Chemical analysis report / MTC |
| Material Traceability | Heat number and batch records maintained through casting, forming and finishing | Traceability record |
| Conductivity | Digital conductivity meter or agreed conductivity test method | Conductivity test data |
| Hardness | Vickers or another agreed hardness method | Hardness report |
| Overall Dimensions | Micrometers, calipers, profile gauges, CMM or optical measurement | Dimensional inspection report |
| Step Depth | CMM, optical projector or dedicated profile fixture | Step-depth inspection data |
| Face Parallelism | CMM or precision flatness/parallelism measurement | Geometry inspection record |
| Step Verticality | Optical measurement, CMM or inspection fixture | 90-degree geometry record |
| Root Radius | Optical profile measurement or CMM | Radius verification record |
| Surface Roughness | Profilometer measurement on designated contact faces | Roughness report when required |
| Internal Soundness | Ultrasonic inspection on large or critical sections when specified | UT report |
| Plating Thickness | Coating-thickness measurement for silver, tin or nickel surfaces | Plating report |
| Visual Inspection | Surface inspection for scratches, cracks, burrs, oxidation and handling damage | Visual inspection checklist |
| First-Article Inspection | Full dimensional review before batch production when required | FAI report |
| Batch Traceability | Records retained from cast heat through extrusion, drawing, cutting and plating | Batch dossier |
| Shipment Documents | Material and dimensional documents supplied according to the purchase order | EN 10204 3.1 certificate and reports when specified |
| Quality Management | Production controls operated under the applicable ISO 9001 quality system | Quality documentation available through Quality Assurance |
Near-net forming can reduce machining and material waste compared with milling a deep step from a thick solid bar, but the actual benefit depends on the profile, order quantity and tolerance requirements. Electrical resistance, current rating and short-circuit withstand must be confirmed through the complete equipment design.
Typical Applications
| Application | Typical Use | Design Considerations |
|---|---|---|
| LV Switchgear | Busbar transition blocks, outgoing terminals and heavy copper connection pads | Current, temperature rise, hole pattern and insulation clearance |
| ACB and MCCB Assemblies | Copper terminal blocks and half-lap transition pieces | Contact pressure, mounting method and short-time current |
| MV Withdrawable Switchgear | Custom conductive blocks for busbar and breaker connections | Voltage class, creepage distance and equipment-level testing |
| Sandwich Busway | Section-transition blocks and plug-in branch connections | Mating clearance, thermal expansion and current distribution |
| Power Transformers | High-current outgoing connection blocks and transition conductors | Heat rise, connection method and mechanical support |
| Rectifier Equipment | Heavy copper terminal and current-transfer blocks | Continuous current, thermal cycling and surface finish |
| EV High-Power Chargers | Copper transition pads and terminal connection blocks | Conductivity, compact layout and cooling conditions |
| Energy-Storage Containers | High-current connection blocks for PCS and distribution systems | Vibration, enclosure clearance and temperature rise |
| Renewable Power Systems | Copper connection blocks for inverters and distribution panels | Electrical loading, insulation and corrosion protection |
| Industrial Control Cabinets | Custom machined copper terminal and support blocks | Hole position, assembly access and service requirements |
| High-Current Test Equipment | Solid copper current-transfer and fixture blocks | Contact resistance, repeatability and thermal stability |
FAQ
It is a thick, solid copper component with a rectangular cross-section designed to carry current or connect large conductors. It may be supplied as a full-flat block, stepped block, half-lap splice block or machined terminal component.
Common grades include C11000, C10200, C10100, Cu-ETP, Cu-OF, T2, TU1 and TU2. C10400/C10700 silver-bearing copper and C18150 CuCrZr may be evaluated when higher temperature resistance or improved wear performance is required.
Yes. Shallow compensation steps, deep half-lap steps, 90-degree shoulders, grooves and other profile features can be reviewed according to the mating busbar and assembly drawing.
Indicative profile widths are approximately 15–260 mm, with total thicknesses of approximately 6–80 mm. Cut blocks may be supplied in lengths of approximately 20–1,000 mm. Final dimensions depend on the approved drawing.
Typical enquiry targets may include ±0.02–0.05 mm for selected thickness dimensions, parallelism of approximately 0.02 mm, 90-degree step verticality of approximately 0.02 mm and surface roughness around Ra 0.4 μm. Feasibility must be confirmed by drawing review
Yes. C10200 OFC and C10100 OFHC can be considered for conductivity-focused applications. Conductivity should be verified according to the selected grade, standard, temper and test method.
Yes. Silver, tin or nickel plating can be evaluated according to the current, contact force, wear, corrosion and operating-temperature requirements. Plating thickness and adhesion requirements should be stated in the purchase specification.
Depending on the order requirement, available documents may include MTC, chemical analysis, conductivity data, hardness records, dimensional inspection reports, surface-finish records, plating reports and third-party inspection documents.
Request a Quote
| Required Information | Details to Provide |
|---|---|
| Product Type | Full-flat block, shallow-step block, deep half-lap block or custom terminal block |
| Drawing | 2D drawing, 3D CAD file or dimensioned sketch |
| Copper Grade | C11000, C10200, C10100, T2, TU1, TU2 or another specified grade |
| Cross-Section | Width, thickness, step depth, radius, groove and shoulder dimensions |
| Length | Bar length, cut-block length or finished component length |
| Tolerance | Thickness, step depth, flatness, parallelism, verticality and hole-position tolerances |
| Surface | Bright copper, anti-tarnish, silver, tin, nickel or other coating |
| Processing | Cutting, drilling, tapping, milling, deburring, chamfering or marking |
| Electrical Requirement | Current, voltage, conductivity, temperature rise and duty cycle |
| Application | Switchgear, busway, transformer, rectifier, EV charger or energy-storage equipment |
| Quantity | Prototype, sample, trial order, batch quantity or annual requirement |
| Inspection | MTC, conductivity, hardness, dimensional, plating or third-party inspection |
| Delivery Details | Destination country, packing requirements and target schedule |
| Contact | Contact Cymber Metal for an RFQ |











