Cold-Drawn Hexagonal Copper Bar & Cut Blanks

Short Description:

Item Specification
Product Cold-Drawn Hexagonal Copper Bar / Cut-to-Length Hex Blank
Material Options UNS C11000, C10200 or C10100, subject to order confirmation
Applicable Standards ASTM B187/B187M or EN 13601 where applicable to the selected grade and form
Cross-Section Solid regular hexagonal section
Width Across Flats (AF / S) 3–120 mm; size and processing feasibility subject to review
Bar Length 1000–6000 mm, subject to size and supply confirmation
Cut-Blank Length 5–500 mm; custom lengths subject to review
Material Condition Cold-drawn or annealed; temper specified according to grade and standard
End Condition Saw-cut, deburred, faced or chamfered as specified
Custom Machining Center drilling, boring, internal threads, external threads and drawing-defined features
Surface Options Bare copper; optional anti-tarnish treatment, silver, tin or nickel plating
Dimensional Tolerance Across-flats size, length, straightness and end squareness according to the approved specification
Edges & Corners Corner radii and chamfers according to the drawing and processing route
Inspection Dimensions and surface condition; composition, conductivity, hardness and additional testing as specified
Documentation Material certificates and dimensional inspection reports according to the agreed order requirements

Product Detail

Product Tags

Video

Short Description

Cold-drawn hexagonal copper bar supplied in straight lengths or cut-to-length blanks. Available in selected pure copper grades, with across-flats dimensions, material condition, end finishing and optional machining or plating specified to suit the application.

Hexagonal Copper Bar Overview

Hexagonal copper bar is solid copper stock with six external flats. It provides starting material for conductive spacers, connector bodies, threaded components and insert blanks, while allowing wrench holding during subsequent machining or assembly.

Cymber Metal supports pure copper material selection, cutting and secondary processing. Finished-part suitability depends on the selected grade, temper, dimensions and assembly requirements.

Key Features

Six external flats for wrench holding and component positioning; bar or cut-blank supply; selectable material condition; drawing-based drilling, threading and surface finishing. Anti-rotation performance and permissible assembly torque require evaluation in the finished design.

Manufacturing & Quality Control

Processing and inspection are selected according to the copper grade, section size and intended downstream operation.

Stage Process / Control
Material Confirmation Review grade, standard, condition and electrical or mechanical requirements
Forming & Drawing Prepare suitable feedstock and cold-draw through hexagonal tooling according to the selected production route
Straightening & Cutting Control bar straightness and cut blanks to the specified length
Secondary Processing Precision machining for facing, chamfering, drilling and threading as required
Dimensional Inspection Check across-flats dimensions, cut length, straightness, corner condition and specified geometric requirements
Additional Testing Conductivity, hardness, composition or other tests according to the agreed inspection plan
Protection & Packing Protect surfaces and edges during handling and shipment; supply agreed inspection records

Inspection methods, sampling frequency and acceptance criteria are confirmed before production. Further information is available on our quality assurance page.

Typical Applications

Application Potential Use
Switchgear & Busbar Assemblies Blanks for conductive spacers, terminal bodies and connection components
Molded Electrical Components Drawing-defined conductive insert blanks with external hexagonal geometry
CNC-Machined Copper Parts Starting stock for connectors, threaded parts and custom conductive components
Industrial Power Equipment Custom copper connection and grounding components, subject to design requirements

FAQ

What is the difference between copper hex bar and a hex cut blank?

Copper hex bar is supplied in longer straight lengths for further processing. A hex cut blank is a short section cut from the bar, usually prepared for machining, threading or incorporation into a finished component.

Which copper grades are available?

C11000, C10200 and C10100 can be reviewed for the order. C11000 is commonly used for conductive components, while C10200 and C10100 are oxygen-free grades. Selection depends on the applicable standard, joining conditions and required properties.

How should the hexagonal size be specified?

Specify the width across flats, commonly written as AF or S, together with the length. Across flats is the distance between two opposite parallel faces, not the distance between opposite corners. Include corner-radius requirements where important.

Can you supply h9 across-flats tolerances?

An h9 requirement can be reviewed against the nominal size, grade and production route. The numerical limits depend on size; h9 is not equivalent to a universal bilateral tolerance such as ±0.02 mm. Please state the required tolerance system on the drawing.

Does the hexagonal shape guarantee high torque or anti-rotation performance?

No. The flats provide wrench engagement and can help resist rotation in a suitably designed assembly. Permissible torque and resistance to deformation depend on material condition, dimensions, engagement length and the surrounding component.

Can the bars be used in automatic CNC bar feeders?

They can be prepared for compatible equipment, subject to bar size, straightness, length and end preparation. Please provide the machine or feeder requirements. Hexagonal stock does not automatically guarantee vibration-free operation at every spindle speed.

Can you add holes, threads or plating?

Yes, these operations can be reviewed from your drawing. Specify hole positions, thread size and class, chamfers, plated areas and coating thickness. Finished dimensions should account for any plating buildup.

What certificates and inspection reports can be requested?

Material certificates and dimensional reports can be specified with the order. Conductivity, hardness and plating reports depend on the agreed inspection plan. EN 10204 3.1, RoHS or REACH documentation requirements should be raised during enquiry for confirmation.

Request a Quote

Please contact Cymber Metal with the copper grade, standard, temper, across-flats size, bar or blank length, tolerances and quantity. For processed parts, include the drawing, threading and surface requirements, application, required documents, destination and target delivery date.


  • Previous:
  • Next:

  • Write your message here and send it to us