Round-to-Flat Copper Terminal with Countersunk Tang

Short Description:

Item Specification / Enquiry Reference
Product Round-to-flat copper terminal with countersunk connection tang
Product Form Custom machined conductive transition component
Main Geometry Cylindrical body, tapered shoulders and rounded-end flat tang
Material Options C11000 ETP copper, C10200 oxygen-free copper or C10100 oxygen-free electronic copper
Alternative Materials Silver-bearing copper, C14500 or C18150 may be reviewed separately; conductivity and mechanical requirements must be reassessed
Raw Material Standard ASTM B187/B187M or another agreed specification appropriate to the selected grade and stock form
Cylindrical Body Diameter Approximately 10–120 mm, subject to drawing review
Overall Length Approximately 30–350 mm, subject to drawing review
Tang Thickness Approximately 3–40 mm, depending on body size and connection design
Tang Configuration Centered or offset arrangement, rounded tip and drawing-defined shoulder geometry
Tang Hole Conical countersink as illustrated; hole diameter, included angle and seating depth specified by drawing
Axial Bore Plain or internally threaded bore according to the connection design
Thread Size Reference M6–M64 for feasibility review; thread depth, engagement and remaining wall thickness must be checked
Radial Hole Diameter, position, depth and intended function specified by the customer
Cylindrical OD Tolerance Enquiry target of ±0.015–0.03 mm on designated features, subject to size and process review
Thread-to-OD Alignment A 0.02 mm target may be reviewed with a defined datum system and inspection method
Tang Centering A 0.03 mm target may be reviewed where the drawing defines the relevant datums and geometric requirement
Contact Surface Roughness Ra 0.4 μm target on specified contact faces, subject to finishing review
Hardness 85–125 HV may be specified as an enquiry target; achievable values depend on grade and material condition
Electrical Conductivity A minimum of 98% IACS may be specified for suitable pure-copper grades and conditions, subject to agreed testing
Surface Options Bare copper, compatible anti-tarnish treatment, or silver, tin or nickel plating
Silver Plating Reference Approximately 5–30 μm for quotation review; local thickness, coverage and contact requirements must be defined
Documentation Material certificates, dimensional reports and additional inspection documents according to the agreed order scope
Supply Basis Customer drawing, approved specification and confirmed inspection plan

Product Detail

Product Tags

Video

Short Description

Cymber Metal supports custom round-to-flat copper terminals that connect a cylindrical conductor interface to a flat bolted connection. The design combines a round body, tapered shoulders and a rounded-end tang with a conical countersink.

Material options include C11000 electrolytic tough-pitch copper, C10200 oxygen-free copper and C10100 oxygen-free electronic copper, subject to application and order review. Axial bores, internal threads, radial holes, tang dimensions and surface treatments can be specified on the drawing.

Suitable designs can be reviewed for switchgear, conductor-stem interfaces and busbar transition assemblies. Final dimensions, electrical requirements, mechanical loading and inspection criteria are confirmed before production.

Round-to-Flat Copper Terminal Overview

A round-to-flat copper terminal is a conductive transition component with a cylindrical body at one end and a flat connection tang at the other. It provides a way to connect a round conductor interface to a bolted flat conductor without using the same geometry at both ends.

The illustrated component features tapered shoulders, a rounded tang tip, a conical countersink, an axial end bore and a small radial side hole. These features define the connection layout; their assembly functions must be specified by the equipment drawing.

The terminal can be reviewed as a one-piece machined component from suitable pure copper material. Grade, temper, remaining wall thickness, thread engagement and contact geometry should be selected together for the intended electrical and mechanical duty.

This is a custom conductive component, not a complete vacuum interrupter, circuit breaker or qualified cable-crimp lug.

Key Features

Feature Design Value
Round-to-Flat Geometry Connects a cylindrical interface to a flat bolted conductor interface
One-Piece Construction Option Allows the body and tang to be machined from one suitable blank without an added joint between these sections
Tapered Shoulder Transition Provides a gradual change in section; loading and fatigue requirements still require engineering assessment
Countersunk Tang Hole Accommodates a compatible countersunk fastener when angle, depth and head dimensions are correctly matched
Drawing-Defined Axial Bore Supports a plain-bore or internally threaded connection according to the mating component
Configurable Radial Hole Allows a customer-defined side feature without assuming a locking, venting or locating function
Selectable Copper Grade Allows conductivity, machining and material-condition requirements to be balanced
Surface Treatment Options Allows coating coverage and contact-surface requirements to be specified for the assembly

Manufacturing & Quality Control

The manufacturing route and inspection plan are established from the approved drawing. Cymber Metal’s copper machining support provides a starting point for reviewing turning, milling, drilling, threading and finishing requirements.

Manufacturing Process

Stage Process Focus Drawing / Order Requirements
Drawing Review Review interfaces, section transitions, bores and fastener seating Confirm datums, critical dimensions, loading and assembly constraints
Material Selection Select a suitable copper grade, condition and stock form Confirm material specification, conductivity and hardness requirements
Blank Preparation Prepare a suitable machining blank Allow sufficient machining stock and identify the relevant material batch
Cylindrical Turning Machine the body diameter, end face and applicable axial features Control specified diameters, lengths, shoulders and reference surfaces
Tang Milling Produce the flat tang, rounded tip and tapered shoulders Follow tang thickness, offset, width and transition geometry
Hole and Thread Machining Produce the tang hole, conical countersink, axial bore and radial feature Confirm hole positions, countersink angle, thread class and engagement depth
Deburring and Finishing Remove machining burrs and finish designated surfaces Protect functional edges and maintain specified contact geometry
Surface Treatment Apply the agreed finish where required Define coating type, thickness, masking and dimensional allowance
Cleaning and Packaging Clean and protect the finished components Prevent damage to tang faces, threads and plated surfaces during transport

Silver, tin and nickel coating requirements can be discussed alongside the available copper plating services. Coating selection should account for mating materials, contact conditions and final dimensional limits.

Quality Control

Inspection Item Suggested Method Acceptance Basis
Material Identity Review material certificates and perform additional testing where specified Agreed grade and raw-material specification
Oxygen-Related Requirements Appropriate material documentation or suitable analytical testing Applicable oxygen-free grade requirements; ordinary XRF alone does not establish low oxygen content
Dimensions and Geometry Micrometers, suitable gauges and coordinate measurement where appropriate Approved drawing and defined datums
Axial and Radial Features Bore measurement, positional inspection and thread gauges where applicable Specified hole dimensions, thread class and engagement requirements
Countersink Geometry Check hole size, included angle and depth Compatible fastener-head geometry and drawing-defined seating condition
Contact Surface Finish Surface roughness measurement on designated faces Agreed Ra limit and measurement location
Conductivity and Hardness Suitable conductivity and hardness testing Agreed property limits, material condition and test procedure
Plating Quality Coating-thickness measurement and additional coating tests where specified Agreed coating specification, coverage and acceptance limits
Additional Inspection Third-party inspection or suitable non-destructive testing when required Agreed method, coverage, sampling and acceptance criteria
Final Documentation Review the agreed inspection and material records Purchase-order requirements and approved documentation scope

Inspection frequency, sampling, traceability and reporting should be agreed before production. See the Quality Assurance page for the broader quality framework.

Typical Applications

Potential applications depend on the approved connection design and equipment-level qualification.

Application Typical Use Design Considerations
Vacuum Circuit Breaker Assemblies External conductor-stem to flat-conductor transition Stem interface, movement, contact force, thread retention and temperature rise
Switchgear Conductor Connections Connection between cylindrical and flat conductive components Assembly space, contact pressure, insulation clearances and short-circuit loading
Disconnector and Earthing-Switch Assemblies Drawing-defined conductive transition or connection component Mechanical duty, alignment, fastening arrangement and operating loads
Transformer and Bushing Connections External round-to-flat terminal interface Mating dimensions, permissible torque, thermal expansion and environmental exposure
Industrial Busbar Assemblies Rigid transition between a round conductor and a flat busbar Current duty, joint resistance, bolted contact area and support arrangement
Rail and Renewable-Energy Equipment Custom conductor transition where required by the equipment design Vibration, corrosion, temperature cycling and application-specific validation

FAQ

What is a round-to-flat copper terminal?

It is a conductive component with a cylindrical body and a flat connection tang. The geometry allows a round conductor interface to connect to a flat bolted conductor. Bore dimensions, tang thickness and fastening details are defined by the mating assembly.

Which copper grades can be considered?

C11000 ETP copper, C10200 oxygen-free copper and C10100 oxygen-free electronic copper are potential options. The final selection depends on conductivity, material condition, processing and service requirements. Alternative copper alloys require a separate review and do not automatically meet the same conductivity target.

Can the axial bore and radial hole be customized?

Yes, these features can be reviewed against the drawing. The axial bore may be plain or internally threaded. A radial hole may serve a locating, fastening or other specified function, but its presence alone does not establish a qualified anti-loosening arrangement.

Does the countersunk hole guarantee a flush screw head?

No. Flush seating depends on the screw-head dimensions, countersink angle, hole depth and coating allowance. These features must be matched on the drawing. A flush fastener also does not independently establish discharge prevention or electrical-clearance compliance.

Is conductivity of at least 98% IACS guaranteed?

Not for every material or condition. A minimum of 98% IACS can be specified for engineering review when a suitable pure-copper grade is selected. The agreed requirement should identify the test method, temperature basis and acceptance criteria.

What machining tolerances can be specified?

Critical OD, alignment, tang position and surface-finish requirements can be submitted for review. Feasibility depends on component size, material condition, datum selection and coating allowance. Values such as ±0.015 mm or a 0.02 mm alignment target should be confirmed for the specific drawing.

Can the terminal be silver-, tin- or nickel-plated?

These finishes can be reviewed according to the application. Specify coating thickness, coverage, masking and any required underlayer or testing. The coating system should be selected for the mating materials and service conditions, with its effect on threads and fits included in the drawing.

Can this terminal be used in a vacuum circuit breaker?

A suitable design may be considered for a specified VCB conductor interface. Appearance alone cannot establish suitability for a voltage class or switching duty. The equipment designer must confirm the interface, mechanical loads, temperature rise, electrical clearances and applicable qualification tests.

Request a Quote

Required Information Details to Provide
Drawing Dimensioned 2D drawing and, where available, a STEP model
Material Copper grade, standard, material condition and permitted substitutions
Main Dimensions Body diameter, overall length, tang width, thickness, offset and shoulder geometry
Holes and Threads Bore sizes, thread specification, radial-hole function and countersink details
Critical Requirements Datums, tolerances, roughness, conductivity, hardness and contact-surface requirements
Operating Conditions Current duty, temperature, mechanical loads, vibration and assembly environment
Surface Treatment Bare copper or coating specification, thickness, coverage and masking
Quantity Prototype quantity, batch quantity and expected annual demand
Inspection Documents Material certificates, dimensional reports, coating reports and third-party inspection requirements
Delivery Requirements Destination, packaging needs and requested delivery schedule

Send your drawing to Cymber Metal for a custom terminal quotation. Include the mating-interface requirements so material, machining, finishing and inspection can be reviewed together.


  • Previous:
  • Next:

  • Write your message here and send it to us