Copper Saddle Terminal with Flat Connection Tang

Short Description:

Item Specification / Enquiry Reference
Product Copper saddle terminal with flat connection tang
Product Form Custom machined conductive transition component
Main Geometry Concave saddle base, cylindrical neck and rounded-end flat tang
Material Options C11000 ETP copper, C10200 oxygen-free copper or C10100 oxygen-free electronic copper
Alternative Materials Silver-bearing copper, C14500 or C18150 may be reviewed separately; conductivity and mechanical requirements must be reassessed
Material Standard ASTM B187/B187M or another agreed specification appropriate to the selected grade and stock form
Overall Height Approximately 30–280 mm, subject to drawing review
Saddle Base Width Approximately 20–180 mm, subject to drawing review
Cylindrical Neck Diameter Approximately 10–100 mm, depending on connection geometry and loading
Mating Conductor Diameter Approximately 12–160 mm for design review; saddle dimensions must match the specified conductor
Saddle Geometry Concave cylindrical recess with drawing-defined radius, width, depth and orientation
Base Holes Two holes as illustrated; clearance or tapped configuration according to drawing
Base Thread Reference M5–M20 where dimensionally feasible; engagement length and remaining material must be checked
Upper Tang Flat connection face, rounded tip and drawing-defined shoulder
Upper Tang Hole Through-hole as illustrated; diameter and edge distances according to the mating connection
Saddle Radius Tolerance A ±0.02 mm target may be reviewed for specified sizes and measurement conditions
Geometric Orientation A 0.03 mm target may be reviewed for drawing-defined parallelism or perpendicularity requirements
Contact Surface Roughness Ra 0.4 μm target on designated surfaces, subject to finishing review
Hardness 85–125 HV may be submitted as an enquiry target; feasibility depends on grade and material condition
Electrical Conductivity A minimum of 98% IACS may be specified for suitable pure-copper grades and conditions, subject to agreed verification
Surface Options Bare copper, compatible anti-tarnish treatment, or silver, tin or nickel plating
Silver Plating Reference Approximately 5–30 μm for quotation review; coverage, local thickness and masking must be defined
Construction One-piece machining can be reviewed where required; the approved manufacturing route governs supply
Documentation Material certificates and inspection reports according to the agreed order scope
Supply Basis Customer drawing, approved specification and confirmed inspection plan

Product Detail

Product Tags

Video

Short Description

This copper saddle terminal combines a concave saddle base, a cylindrical neck and a rounded flat connection tang. The geometry provides a drawing-defined transition between a round conductor interface and a flat bolted connection.

Cymber Metal supports material selection and custom machining review in C11000 electrolytic tough-pitch copper, C10200 oxygen-free copper and C10100 oxygen-free electronic copper. Saddle radius, base-hole arrangement, tang dimensions and surface treatment can be specified to suit the mating assembly.

Potential uses include switchgear conductor connections, tubular busbar branches and custom power-distribution assemblies. Final suitability depends on the approved fastening arrangement, contact conditions, electrical duty and mechanical requirements.

Copper Saddle Terminal Overview

A copper saddle terminal is a conductive transition component with a concave base shaped to interface with a cylindrical conductor. Its upper tang provides a separate flat connection point for a branch conductor, busbar or suitable flexible connector.

The illustrated design features a wide saddle base with two holes, a cylindrical neck and an upper rounded tang with one through-hole. The underside contains a curved recess intended to match a drawing-defined round interface.

The saddle component is not a complete clamp by itself. A mating clamp member, fasteners or another approved retention arrangement must establish the required contact pressure and mechanical restraint.

Suitable pure copper materials can be reviewed alongside the connection geometry. Actual contact performance depends on saddle fit, conductor dimensions, surface condition, coating, bolt preload and operating temperature, rather than nominal contact area alone.

Key Features

Feature Design Value
Concave Saddle Interface Provides a curved mating surface for a specified round conductor
Dual-Hole Base Provides two fastening locations for a drawing-defined retention arrangement
Cylindrical Neck Connects the saddle base to the upper tang within the specified assembly envelope
Flat Upper Tang Provides a bolted interface for a compatible flat conductor or connector
Custom Interface Geometry Allows saddle radius, tang offset, hole spacing and shoulder geometry to be reviewed together
One-Piece Construction Option Can avoid an added joint between the base, neck and tang when machined from one suitable blank
Selectable Copper Grade Allows conductivity, hardness, machining and service requirements to be balanced
Optional Surface Treatment Allows coating coverage and contact-surface requirements to be specified for the mating assembly

Manufacturing & Quality Control

The manufacturing route is established from the approved drawing, material condition and inspection requirements. Cymber Metal’s custom copper machining support provides a starting point for reviewing the saddle, neck, tang and fastening features.

Manufacturing Process

Stage Process Focus Drawing / Order Requirements
Engineering Review Review conductor interface, tang position and fastening arrangement Confirm datums, loads, mating dimensions and critical contact surfaces
Material Selection Select a suitable copper grade, condition and blank Confirm material specification, conductivity and hardness requirements
Blank Preparation Prepare machining stock and establish reference surfaces Identify the relevant material batch and allow sufficient finishing stock
Body Machining Produce the cylindrical neck, base outline and upper tang Follow drawing-defined dimensions, offsets, shoulders and edge geometry
Saddle Machining Machine the concave cylindrical recess Control radius, depth, width and orientation relative to the specified datums
Drilling and Threading Produce the upper tang hole and two base holes Confirm hole positions, thread class, engagement and edge distances
Deburring and Finishing Remove burrs and finish designated contact surfaces Preserve functional edges and avoid damage to the saddle and tang
Surface Treatment Apply the specified finish where required Define coating thickness, masking, thread protection and dimensional allowance
Cleaning and Packaging Clean and protect finished components Prevent impact damage, contamination and abrasion during transport

Fixture strategy and machining sequence are selected to achieve the approved requirements. Single-setup or five-axis machining is not assumed for every design.

Optional finishes can be reviewed through the copper plating services, with particular attention to the saddle contact surface, tang face and threaded features.

Quality Control

Inspection Item Suggested Method Acceptance Basis
Material Identity Material certificate review and additional testing where specified Agreed copper grade and raw-material specification
Oxygen-Free Requirements Appropriate material documentation or suitable analytical testing Applicable oxygen-free grade requirements; ordinary XRF alone does not establish low oxygen content
Overall Dimensions Suitable dimensional gauges and coordinate measurement where appropriate Approved drawing and defined datums
Saddle Profile Profile measurement, coordinate inspection or an agreed checking fixture Specified radius, depth, width and profile requirements
Mating Fit Agreed master conductor, contact-pattern check or assembly trial Defined fit criteria; nominally matching radii do not guarantee complete surface contact
Hole Pattern and Threads Positional measurement and thread gauges where applicable Hole spacing, thread class, engagement and orientation requirements
Contact Surface Finish Roughness measurement and visual inspection Specified Ra limit and surface acceptance criteria
Conductivity and Hardness Suitable conductivity and hardness testing Agreed material condition, test method and property limits
Plating Quality Coating-thickness measurement and additional tests where required Agreed coating specification, coverage and acceptance limits
Additional Inspection Third-party inspection or suitable non-destructive testing when specified Agreed method, coverage, sampling and acceptance criteria
Final Documentation Review material and inspection records Purchase-order documentation and traceability requirements

Inspection frequency, sampling and reporting are agreed before production. Further information is available on the Quality Assurance page.

Typical Applications

These are potential application contexts, subject to drawing review and equipment-level validation.

Application Typical Use Design Considerations
Tubular Busbar Branch Connections Transition from a round main conductor to a flat branch connection Tube wall thickness, saddle fit, clamping pressure, temperature rise and short-circuit forces
Switchgear Conductor Assemblies Drawing-defined connection between cylindrical and flat conductors Interface orientation, fastening access, electrical clearances and mechanical restraint
Vacuum Circuit Breaker Assemblies External conductive transition or shunt connection where specified Moving or stationary duty, flexible-connector loads, alignment and temperature rise
Disconnector and Earthing-Switch Assemblies Custom conductive saddle connection Operating forces, contact pressure, fastening retention and equipment qualification
Industrial Power Equipment Round-conductor branch terminal for rectifier or induction-equipment assemblies Current frequency, thermal duty, cooling arrangement and vibration
Water-Cooled Conductor Assemblies External connection to an appropriately designed round conductor or tube Avoid tube crushing or leakage; confirm wall strength, coolant compatibility and electrical duty

FAQ

What is a copper saddle terminal?

It is a conductive transition component with a concave base for a round conductor and a separate connection interface, such as a flat tang. The illustrated design includes a cylindrical neck, a two-hole base and a single-hole upper tang.

Is this a complete clamp connector?

Not by itself. The saddle component requires a compatible retention arrangement, which may include a mating clamp member and fasteners. The full assembly must establish adequate contact pressure and mechanical restraint without overstressing the conductor.

Can the saddle radius and hole spacing be customized?

Yes, these features can be reviewed against the drawing. Specify conductor diameter and tolerance, saddle width and depth, hole spacing, fastener size and tang orientation. For tubular conductors, include wall thickness and allowable clamping loads.

Does a matching saddle radius guarantee full contact?

No. Contact depends on profile accuracy, conductor ovality, surface condition, coating and the fastening arrangement. A nominal radius match does not prove zero-gap contact. Where fit is critical, define an agreed checking method and acceptance criterion.

Which copper grades can be considered?

C11000 ETP copper, C10200 oxygen-free copper and C10100 oxygen-free electronic copper are potential options. Selection depends on conductivity, material condition and service requirements. Copper-alloy alternatives require separate assessment and do not automatically meet the same conductivity target.

Can the terminal be supplied as a one-piece component?

One-piece machining from a suitable copper blank can be reviewed where the geometry permits. This can avoid an added joint between the saddle, neck and tang. It does not establish continuous grain flow, unlimited fatigue life or freedom from fracture.

Are silver, tin and nickel coatings available?

These finishes can be reviewed according to the mating materials and operating conditions. Specify coating thickness, coverage, masking and required testing. Coating allowance must be included when defining saddle fit, hole dimensions and threaded features.

What electrical rating does this terminal have?

No universal current or voltage rating can be assigned from the photographs or dimensions alone. Suitability depends on the complete assembly, contact resistance, temperature rise, insulation clearances, short-circuit duty and applicable equipment tests. Provide those requirements with the enquiry.

Request a Quote

Required Information Details to Provide
Drawing Dimensioned 2D drawing and, where available, a STEP model
Material Copper grade, standard, condition and permitted substitutions
Mating Conductor Diameter, tolerance, solid or tubular construction, and tube wall thickness where applicable
Saddle Geometry Radius, width, depth, contact length and orientation
Tang and Neck Tang width, thickness, offset, hole size, neck diameter and overall height
Fastening Arrangement Base-hole specification, clamp details, fastener grade, engagement and installation requirements
Critical Properties Conductivity, hardness, roughness, datums and geometric tolerances
Operating Conditions Current duty, frequency, temperature, mechanical loading, vibration and environment
Surface Treatment Finish, coating thickness, coverage, masking and contact-surface requirements
Quantity and Documents Prototype and production quantities, material certificates and inspection requirements
Delivery Destination, packaging needs and requested schedule

Send your drawing to Cymber Metal for a copper saddle terminal quotation. Include the mating conductor and clamp arrangement so the complete interface can be reviewed.


  • Previous:
  • Next:

  • Write your message here and send it to us