Custom T-Shaped Pure Copper Profile Block with Locating Tabs
Video
Short Description
This custom T-shaped copper profile block is designed for electrical assemblies that require a shaped conductive component with side locating features. The tab geometry can be made to suit a matching insulator slot or assembly, subject to drawing and fit review.
Depending on the profile, quantity and dimensional requirements, production may use copper profile extrusion and drawing, precision cutting, fine blanking, wire EDM or CNC machining. Cymber Metal also provides pure copper products and custom copper profile extrusion options.
Key Features
- T-shaped profile with side locating features
- Custom section geometry for electrical assemblies
- Multiple copper grades available subject to specification
- Profile forming or machining route selected according to design and order quantity
- Optional plating, surface treatment or local silver contact-tip brazing
- Dimensions, fit and inspection requirements agreed against the approved drawing
Manufacturing & Quality Control
| Stage | Description |
|---|---|
| Drawing Review | Confirm alloy, profile geometry, mating slot, tolerances, quantity and application requirements |
| Profile Production | Extrusion/drawing may be considered for suitable continuous profiles; other geometries may use cutting, fine blanking, EDM or machining |
| Secondary Operations | Drilling, tapping, deburring, plating or contact-tip brazing can be reviewed against the drawing |
| Inspection | Dimensional and visual checks; conductivity, coating or other tests can be specified for the order |
| Documentation | Material certificates and inspection records can be agreed during order review |
For inspection and documentation details, see Cymber Metal Quality Assurance. For machining requirements, see fine machining support.
Typical Applications
- Stationary contact assemblies for MCCB, MCB and ACB circuit breakers
- Contactors and relay output terminals
- Switchgear and electrical distribution equipment
- Arc-runner or contact-support components
- EV power distribution units and battery disconnect assemblies
- Energy-storage electrical equipment
Final suitability depends on the selected material, electrical duty, mating components and customer design requirements.
Frequently Asked Questions
The supplied product information gives indicative profile spans of 8–180 mm and thicknesses or heights of 2–80 mm. Final dimensions, tab width and tolerances require drawing and manufacturability review.
It is a shaped copper component with a T-like profile and side locating features. It can be used as a conductive base or insert in electrical assemblies, with the final geometry determined by the customer’s drawing.
C11000, C10200 and C10100 are possible options. Other grades such as CW004A, CW008A, T2, TU1 or TU2 may be reviewed. Confirm the required grade and governing specification before ordering.
There may not be one standard that covers every custom profile and feature. The applicable material or product standard should be selected based on the alloy and product form, with the approved drawing defining the component geometry and tolerances.
The route depends on profile geometry, material, quantity and tolerance requirements. Extrusion and drawing may suit continuous profiles; cutting, fine blanking, wire EDM or CNC machining may suit other designs.
Silver or tin plating, anti-tarnish treatment and local silver contact-tip brazing may be considered. Specify the treatment location, required finish and applicable requirements in the drawing or RFQ.
Dimensional and visual inspection can be specified, with additional checks such as conductivity or coating inspection where required. Confirm the required tests and documentation before order placement.
Request a Quote
Please send:
- 2D drawing with the full contour, radii, notches and datum references.
- 3D model if steps, pockets, holes or complex features are required.
- Copper grade, applicable standard and material condition.
- Part thickness, overall dimensions and critical tolerances.
- Order quantity, annual demand and prototype requirements.
- Machining, deburring, surface finish and plating requirements.
- Application, operating current, temperature and joint design.
- Inspection documents, packing, destination and requested delivery schedule.
Contact Cymber Metal for material selection, manufacturability review and quotation.









